It seems the problem of your environment. If you has compile the radiusclient first. Please make sure the its lib files and its include files are in your include path and lib path. You can search your /usr/local/include and make sure the file radiusclient.h in it. and /usr/local/lib/libradiusclient.* are exist. Then vi /etc/ld.so.conf and check if "/usr/local/lib" exist or not. If not, add it. Then use command "ldconf" to reload it. And make again. On Thu, 17 Feb 2005 17:56:47 +0200, Roman &lt;leroi(a)navigator.lv&gt; wrote: > well: > > gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall > -minline-all-stringops -malign-double -falign-loops -mcpu=athlon > -DNAME='"auth_radius.so"' -DVERSION='"0.8.14"' -DARCH='"i386"' > -DOS='"linux"' -DCOMPILER='"gcc 3.3"' -D__CPU_i386 -D__OS_linux > -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP > -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC > -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 > -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD > -DHAVE_MSG_NOSIGNAL > -DHAVE_MSGHDR_MSG_CONTROL -I/usr/local/include -c authrad_mod.c -o > authrad_mod.o > authrad_mod.c: In function `mod_init': > authrad_mod.c:111: error: `DICT_VENDOR' undeclared (first use in this > function) > authrad_mod.c:111: error: (Each undeclared identifier is reported only > once authrad_mod.c:111: error: for each function it appears in.) > authrad_mod.c:111: error: `vend' undeclared (first use in this function) > authrad_mod.c:135: warning: assignment makes pointer from integer without > a cast > authrad_mod.c:140: error: too many arguments to function `rc_conf_str' > authrad_mod.c:140: error: too many arguments to function > `rc_read_dictionary' authrad_mod.c:145: warning: implicit declaration of > function > `rc_dict_findvend' > authrad_mod.c:163: error: too many arguments to function > `rc_dict_findattr' authrad_mod.c:163: error: too many arguments to > function `rc_dict_findval' make: *** [authrad_mod.o] Error 1 > > and... 0.8.14 binary package has auth_radius in it > radiusd and radiusclient are installed and _working_ > > On Thursday 17 February 2005 17:32, Charles Wang wrote: > > Just download the source code and type "make" under > > ser/modules/auth_radius/ Then copy the auth_radius.so to > > /usr/local/lib/ser/modules/ > > Re-run your serctl. > > Make sure you have to install radiusclient package first before compile > > it. > > > > Charles > > > > On Thu, 17 Feb 2005 16:44:16 +0200, Roman &lt;leroi(a)navigator.lv&gt; wrote: > > > Sorry forgot syslog messages: > > > > > > Feb 17 16:37:41 uranus ser: ERROR: load_module: could not open module > > > </usr/local/lib/ser/modules/auth_radius.so>: > > > /usr/local/lib/ser/modules/auth_radius.so: undefined symbol: > > > rc_dict_findvend > > > Feb 17 16:37:41 uranus ser: parse error (36,13-55): failed to load > > > module Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module > > > matching auth_radius found | > > > Feb 17 16:37:41 uranus ser: parse error (44,78-79): Can't set module > > > parameter Feb 17 16:37:41 uranus ser: set_mod_param_regex: No module > > > matching auth_radius found | > > > Feb 17 16:37:41 uranus ser: parse error (45,43-44): Can't set module > > > parameter Feb 17 16:37:41 uranus ser: parse error (93,32-33): unknown > > > command, missing loadmodule? > > > > > > On Wednesday 16 February 2005 20:45, Roman wrote: > > > > Anybody please help with subj > > > > 0.8.14 binaries from iptel.org > > > > ser -dddddddd says: > > > > ERROR: bad config file (4 errors) > > > > > > > > config as in the manual: > > > > > > > > # ----------- global configuration parameters > > > > ------------------------ > > > > > > > > debug=5 # debug level (cmd line: -dddddddddd) > > > > #fork=yes > > > > #log_stderror=no # (cmd line: -E) > > > > > > > > /* Uncomment these lines to enter debugging mode > > > > debug=7 > > > > fork=no > > > > log_stderror=yes > > > > */ > > > > > > > > check_via=no # (cmd. line: -v) > > > > dns=no # (cmd. line: -r) > > > > rev_dns=no # (cmd. line: -R) > > > > port=5065 > > > > #children=4 > > > > fifo="/tmp/ser_fifo" > > > > > > > > # ------------------ module loading > > > > ---------------------------------- > > > > > > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > > > > > > loadmodule "/usr/local/lib/ser/modules/auth.so" > > > > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > > > > > > > # ----------------- setting module-specific parameters > > > > --------------- > > > > > > > > # -- usrloc params -- > > > > modparam("usrloc", "db_mode", 2) > > > > > > > > # -- auth params -- > > > > modparam("auth_radius", > > > > "radius_config","/etc/radiusclient/radiusclient.conf") > > > > modparam("auth_radius", "service_type", 15) > > > > > > > > # -- rr params -- > > > > # add value to ;lr param to make some broken UAs happy > > > > modparam("rr", "enable_full_lr", 1) > > > > > > > > #modparam("acc", "log_level", 1) > > > > #modparam("acc", "radius_flag", 1) > > > > > > > > # ------------------------- request routing logic > > > > ------------------- # main routing logic > > > > > > > > > > > > route{ > > > > > > > > # initial sanity checks -- messages with > > > > # max_forwards==0, or excessively long requests > > > > if (!mf_process_maxfwd_header("10")) { > > > > sl_send_reply("483","Too Many Hops"); > > > > break; > > > > }; > > > > if ( msg:len > max_len ) { > > > > sl_send_reply("513", "Message too big"); > > > > break; > > > > }; > > > > > > > > # we record-route all messages -- to make sure that > > > > # subsequent messages will go through our proxy; that's > > > > # particularly good if upstream and downstream entities > > > > # use different transport protocol > > > > record_route(); > > > > # loose-route processing > > > > if (loose_route()) { > > > > t_relay(); > > > > break; > > > > }; > > > > > > > > # if the request is for other domain use UsrLoc > > > > # (in case, it does not work, use the following command > > > > # with proper names and addresses in it) > > > > if (uri==myself) { > > > > > > > > if (method=="REGISTER") { > > > > > > > > # Uncomment this if you want to use digest authentication > > > > if (!radius_www_authorize("")) { > > > > www_challenge("", "1"); > > > > break; > > > > }; > > > > > > > > save("location"); > > > > break; > > > > }; > > > > > > > > # native SIP destinations are handled using our > > > > USRLOC DB if (!lookup("location")) { > > > > sl_send_reply("404", "Not Found"); > > > > break; > > > > }; > > > > }; > > > > # forward to current uri now; use stateful forwarding; that > > > > # works reliably even if we forward from TCP to UDP > > > > if (!t_relay()) { > > > > sl_reply_error(); > > > > }; > > > > > > > > } > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > -- > > > Please avoid sending me Word or PowerPoint attachments. > > > See http://www.fsf.org/philosophy/no-word-attachments.html > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > -- > Please avoid sending me Word or PowerPoint attachments. > See http://www.fsf.org/philosophy/no-word-attachments.html