sr-dev December 2010

sr-dev@lists.kamailio.org

16 participants
114 discussions

[tracker] Task opened: UAC outgoing registration stability

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - bernhards (bernhards) Attached to Project - sip-router Summary - UAC outgoing registration stability Task Type - Improvement Category - Modules kamailio Status - Assigned Assigned To - Daniel-Constantin Mierla Operating System - All Severity - Medium Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - 1. if the registration is not successful the first time, Kamailio will never try it again. 2. if the authentication is not successful, Kamailio will send the registration for authentication again and again for about 100times a second. 3. UAC-reg "reload" command for kamctl More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=107 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

Moving from 1.3.4

by Andrew O. Zhukov

Need your suggestion. I'm just comletely satisfied of openser 1.3.4 fuction set. However, it's going down too recently(3-5 times per month) in the last half year. Some of gdb output applyed. Can you suggest me the best stabile version for relocation. Thanks in advance. -------------------------- core.27986 Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 0x0000000000443315 in pv_get_authattr (msg=0x2aaaae6685a8, param=0x763958, res=0x7fff701d7860) at pvar.c:1319 1319 res->rs.s =((auth_body_t*)(hdr->parsed))->digest.username.user.s; ------------------ core.29065: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 0x000000000048e679 in fm_free (qm=0x7389e0, p=<value optimized out>) at mem/f_malloc.c:125 125 if (frag->size <= (*f)->size) break; --------------- core.29063: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 fm_status (qm=0x7389e0) at mem/f_malloc.c:513 513 size+=f->size,f=f->u.nxt_free,i++,j++){ -------------------------- core.27985: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 fm_status (qm=0x7389e0) at mem/f_malloc.c:513 513 size+=f->size,f=f->u.nxt_free,i++,j++){ (gdb) print i $1 = 383 (gdb) print j $2 = 1 (gdb) print f $3 = (struct fm_frag *) 0x6366373364393531 (gdb) print size $4 = 3631135185266580216 (gdb) print f->u.nxt_free Cannot access memory at address 0x6366373364393539 (gdb) print f->size Cannot access memory at address 0x6366373364393531 ------------------------------------------ core.29790: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 fm_malloc (qm=0x7389e0, size=<value optimized out>) at mem/f_malloc.c:267 267 if ((*f)->size>=size) goto found; (gdb) print size $1 = <value optimized out> (gdb) print *f $2 = (struct fm_frag *) 0x12 ----------------------------------------- core.2156: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 fm_status (qm=0x7389e0) at mem/f_malloc.c:513 513 size+=f->size,f=f->u.nxt_free,i++,j++){ (gdb) print size $1 = 4268969821966590315 (gdb) print f $2 = (struct fm_frag *) 0x373365383d676174 (gdb) print i $3 = 0 (gdb) print j $4 = 1 ---------------------------------------------------------------------------- core.2157: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 sip_msg_cloner (org_msg=0x770a50, sip_msg_len=0x7fff9430d31c) at sip_msg.c:327 327 for(prm=via->param_lst;prm;prm=prm->next) ------------------------------------------------------- core.32225 Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 0x00002aaaacbf78fb in acc_log_request (rq=0x2aaaae4fd0e8) at acc.c:223 223 memcpy(p, val_arr[i].s, val_arr[i].len); (gdb) print i $1 = 8 (gdb) print val_arr[i].len $2 = 6 (gdb) print val_arr[i].s $3 = 0x5e2c34 <Address 0x5e2c34 out of bounds> (gdb) print p $4 = 0x0 ---------------------------- core.21832 Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 0x00002aaaacbf78fb in acc_log_request (rq=0x2aaaae72baa0) at acc.c:223 223 memcpy(p, val_arr[i].s, val_arr[i].len); (gdb) print p $1 = 0x0 (gdb) print i $2 = 8 (gdb) print val_arr[i].s $3 = 0x636084 <Address 0x636084 out of bounds> (gdb) print val_arr[i].len $4 = 6 ------------------- core.24808: Core was generated by `openser -P /var/run/openser/openser.pid -m 32 -u openser -g openser -w /var/run'. Program terminated with signal 11, Segmentation fault. #0 fm_status (qm=0x7389e0) at mem/f_malloc.c:513 513 size+=f->size,f=f->u.nxt_free,i++,j++){ (gdb) print size $1 = 8317892 (gdb) print f $2 = (struct fm_frag *) 0xc (gdb) print i $3 = 367 (gdb) print j $4 = 1 (gdb) q -- Andrew O. Zhukov Telegroup Ukraine Technical director. Phone 380-44-2308228 Cell 380-67-4017256 Fax 380-44-2386027

13 years, 11 months

[tracker] Comment added: make install fails with a bash syntax error

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#87 - make install fails with a bash syntax error User who did this - Dmitry Goncharov (Dmitry) ---------- I just check it with the current 3.1 dev branch, make 3.82 and bash 4.1.9(2)-release. It no longer reproduces for me. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=87#comment146 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

[tracker] Task closed: nathelper.c: rtpproxy_offer / rtpproxy_answer (str2 parameter ignored)

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#69 - nathelper.c: rtpproxy_offer / rtpproxy_answer (str2 parameter ignored) User who did this - Ovidiu Sas (osas) Reason for closing: Fixed Additional comments about closing: Fixed in trunk (future 3.2.x). More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=69 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

UAC module

by Bernhard Suttner

Hi @ all, I tried to get the UAC module working on a asterisk but still without luck and saw some "necessary" improvements for UAC-Reg. If there is somewhere a "wish-list" I could add that there: 1. if the registration is not successful the first time, Kamailio will never try it again. 2. if the authentication is not successful, Kamailio will send the registration for authentication again and again for about 100times a second. 3. UAC-reg "reload" command for kamctl Best regards, Bernhard

13 years, 11 months

[tracker] Comment added: make install fails with a bash syntax error

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#87 - make install fails with a bash syntax error User who did this - Daniel-Constantin Mierla (miconda) ---------- This one seems it was forgotten. Is it still actual? Did it prove to be a buffer overflow in bash or some other system tools? I would close the task if has nothing to do with Makefile syntax. Thanks. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=87#comment145 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

[tracker] Task closed: Documentation change for drouting module

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#96 - Documentation change for drouting module User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Fixed Additional comments about closing: Thanks! Committed the fix to master branch for now. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=96 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

git:master: drouting: added note about dr_gateways

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 07959c8330861275ffe1a611805e7eadbf7799c1 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=07959c8… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Mon Dec 6 10:23:54 2010 +0100 drouting: added note about dr_gateways - it can link to dr_gw_lists with '#' - reported by Marc Cardinal, FS#96 --- modules_k/drouting/README | 160 +++++++++++++++-------------- modules_k/drouting/doc/drouting_admin.xml | 8 +- 2 files changed, 86 insertions(+), 82 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=079…

13 years, 11 months

[tracker] User took ownership: Documentation change for drouting module

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. Daniel-Constantin Mierla has taken ownership of the following task: FS#96 - Documentation change for drouting module More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=96 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

[tracker] Task closed: Error db_berkeley

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#106 - Error db_berkeley User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Fixed Additional comments about closing: Patch committed. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=106 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

13 years, 11 months

← Newer
1
...
5
6
7
8
9
10
11
12
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2010