sr-dev December 2019

sr-dev@lists.kamailio.org

19 participants
279 discussions

[kamailio/kamailio] RPM repos at https://rpm.kamailio.org (#2084)
by Daniel-Constantin Mierla 11 Aug '20

11 Aug '20

Build own repositories for RPM packages for various distros: CentOS, RedHate, OpenSuse ... -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2084

8 37

[kamailio/kamailio] rtpengine module is not retrying for rtpengine_offer. retry is working for rtpengine_answer and rtpengine_delete (#1696)
by Surendra Tiwari 11 Aug '20

11 Aug '20

### Description we are using rtpengine with kamailio [KSR-LUA]. kamailio sending the rtpengine_offer to rtpengine. If kamailio didn't get the response from the rtpengine then it's not retrying . for rtpengine_answer and rtpengine_delete retry is working pretty good. we are using following rtpengine configuration # ----- rtpengine params ----- modparam("rtpengine", "db_url", DBURL) modparam("rtpengine", "table_name" , "rtpengine") modparam("rtpengine", "rtpengine_allow_op", 1) modparam("rtpengine", "queried_nodes_limit", 4) modparam("rtpengine", "rtpengine_retr", 2) modparam("rtpengine", "rtp_inst_pvar", "$avp(RTP_INSTANCE)") modparam("rtpengine", "setid_default", 1) modparam("rtpengine", "rtpengine_tout_ms", 400)  ### Troubleshooting #### Reproduction This issue can be reproduced by above configuration. and need to use rtpengine_offer,rtpengine_answer and rtpengine_delete with ksr lua routing.  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.4 (x86_64/linux) a1df59 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: a1df59 compiled on 06:23:23 Oct 30 2018 with gcc 4.8.4 ``` * **Operating System**:  ``` root@ip-172-31-4-160:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.5 LTS Release: 14.04 Codename: trusty root@ip-172-31-4-160:~# uname -a Linux ip-172-31-4-160 3.13.0-143-generic #192-Ubuntu SMP Tue Feb 27 10:45:36 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1696

3 4

[kamailio/kamailio] Active dialog stats stays static on a passive kamailio node that replicates dialogs via DMQ (#1692)
by Joel Serrano 11 Aug '20

11 Aug '20

### Description In a setup with 2 kamailios in active/passive with a virtual IP that failovers between them: sbc01 (active) is handling calls. sbc02 (passive) is started, and does an initial dialog sync via DMQ ``` root@sbc01:~# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 2", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 583", "dialog:processed_dialogs = 2527", root@sbc01:~# ``` ``` root@sbc02:/etc/kamailio# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 0", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 0", "dialog:processed_dialogs = 0", root@sbc02:/etc/kamailio# ``` >From that point onwards, as long as sbc01 stays as active, sbc02 stays as passive, and no restarts occur anywhere, the values for `dialog` metrics in sbc02 will not change and remain as they are, in the previous example, active_dialogs would remain as 39. ### Troubleshooting This was discovered during some tests from #1591 #### Reproduction Setup 2 kamailio instances that replicate dialogs via DMQ. 1- On Kamailio1 put some traffic to have some active dialogs (must call `dlg_manage()` in routing script for these test calls) 2- Start Kamailio2 3- Compare output of: `kamcmd stats.get_statistics dialog:` on both nodes. 4- Alter the amount of active dialogs on Kamailio1 (either end some or create new ones). 5- Repeat step 3. Kamailio1 --> Step5 will have different values from Step3. Kamailio2 --> Step5 will have exactly the same values from Step3. ### Possible Solutions `dialog:active_dialogs` should remain as 0 on Kamailio2, as technically there are no dialogs being handled by that server, it only has information of replicated dialogs and those stats are available in the `dlg.stats_active` metric. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # kamailio -V version: kamailio 5.2.0-pre1 (x86_64/linux) 2ecf60-dirty flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 2ecf60 -dirty compiled with gcc 6.3.0 ``` * **Operating System**:  ``` root@sbc02:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.5 (stretch) Release: 9.5 Codename: stretch root@sbc02:~# uname -a Linux sbc02 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux root@sbc02:~# ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1692

2 2

[kamailio] Anyone thinking about adding JWT (JSON Web Token) support to Kamailio (#29)
by mading087 24 Jul '20

24 Jul '20

It seems a good idea to support JWT as a new SIP authorization method. Wonder if anyone is interested? Think auth_db would be the best spot to add support for JWT. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/29

12 24

[kamailio/kamailio] 180 Ringing without Contact with TOPOS enabled (#1720)
by Sergey Basov 05 Jun '20

05 Jun '20

### Description Kamailio with TOPOS enabled acts as a proxy between SIP client and SBC. When client sends "180 Ringing" without Contact header - kamailio does not forward it to SBC. If Contact header exists in "180 Ringing" - all works as expected. ### Troubleshooting #### Reproduction Load and configure topos module Make call with "180 Ringing" without Contact header - kamailio will not forward it. #### Log Messages ``` ERROR: topos [tps_storage.c:340]: tps_storage_link_msg(): bad sip message or missing Contact hdr ``` #### SIP Traffic ``` SIP/2.0 180 Ringing Via: SIP/2.0/TLS 1.2.3.4:5061;branch=z9hG4bKef45.8c75f0bae8a59dfaec6ff533ff0f3b2d.0 From: <sip:1111@1.2.3.4:5061>;tag=02000879948559 To: <sip:2.2.2.2@5.6.7.8:5061;transport=tls;user=phone>;tag=SDbsq8499-y2pMOVV Call-ID: apdW7374315131g0bcGhEfDjFof CSeq: 988207425 INVITE User-Agent: agent Supported: replaces, outbound Content-Length: 0 ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.6 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select ``` * **Operating System**: ``` Red Hat Enterprise Linux Server 7.3 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1720

5 19

[kamailio/kamailio] Configure permissions module without database (#2037)
by Sebastian Damm 25 May '20

25 May '20

### Description In our setup, we try to eliminate setup configuration in database and replace it with files. The advantage is, that we can maintain those files via puppet or ansible, and since we always rewrite the whole file, we don't have to take care about deleting obsolete entries. We can run different Kamailio versions without having problems with the version table when using the same database. And finally, we can stop all those local mysqld processes on a lot of machines. Modules like the dispatcher module were easy to change. But the permissions module is not prepared to run without database, if you want to use `allow_trusted()` or `allow_source_address()` and similar. The only option to feed those functions with data is a database table. ### Expected behavior We would like to place files for trusted and address into the Kamailio directory and have Kamailio read from those files during startup or after reload commands. #### Actual observed behavior Data for trusted and address have to reside inside a database. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2037

3 4

[kamailio/kamailio] Allow more options on dispatcher.set_state (#2085)
by duarterocha91 22 May '20

22 May '20

Greetings, Dispatcher RPC command allows to change the runtime state of a GW using its Group ID and the IP. In my implementation i have 2 Kamailio machines in an HA setup and, as such, i have the GW configured twice with same group_id and different sockets (Different HA adressess - one for each machine). I would like to be able to disable on runtime GWs that are configured with an HA adress that isn't present yet on that machine. To be able do that, the combination of GroupID + IP is not enough, but Socket + IP would be enough. Is this possible to implement ? Best Regards -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2085

2 2

[kamailio/kamailio] error: 'pkg/docker' does not have a commit checked out (#2003)
by Daniel-Constantin Mierla 19 May '20

19 May '20

When I just tried to do a commit today, I got the following error: ``` kamailio $ git ci . error: 'pkg/docker' does not have a commit checked out fatal: updating files failed ``` It is related to the `pkg/docker` submodule referencing to kamailio/kamailio-ci. Not sure if this is due to a new git version or something else, because I did commits in that folder a few days ago. To get is sorted out, I did: ``` kamailio $ git submodule update pkg/docker Submodule path 'pkg/docker' not initialized Maybe you want to use 'update --init'? kamailio $ git submodule update --init pkg/docker Submodule 'pkg/docker' (https://github.com/kamailio/kamailio-ci.git) registered for path 'pkg/docker' Cloning into '/.../kamailio/pkg/docker'... Submodule path 'pkg/docker': checked out 'b92a1c899b8c474afadd0cf29dd7cb4ea01a3466' ``` Then it worked to do the commit. I wonder if this is going to break the process we were used with, specially the installation guidelines from GIT repo. Therefore I open this item to see if we really need the to have `pkg/docker` submodule, or better have the docker files directly in the repo. Other options to keep things sane and simple? Git version: ``` $ git --version git version 2.22.0 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2003

5 10

[kamailio/kamailio] Debian package version don't support distribution upgrades (#2160)
by Bas Couwenberg 14 May '20

14 May '20

When upgrading from stretch to buster the kamailio packages aren't upgraded because the 5.3.1+stretch version is greater than 5.3.1+buster: ``` $ dpkg --compare-versions 5.3.1+stretch gt 5.3.1+buster ; echo $? 0 ``` The package version should include the release version instead of its codename, e.g. 5.3.1+deb9u1 & 5.3.1+deb10u1 like done for [stable updates](https://www.debian.org/doc/manuals/developers-reference/pkgs.en.ht…: ``` $ dpkg --compare-versions 5.3.1+deb10u1 gt 5.3.1+deb9u1 ; echo $? 0 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2160

3 5

[kamailio/kamailio] Continued OpenSSL 1.1 crashes with 5.3.0 (#2121)
by Nathan Whitehorn 05 May '20

05 May '20

### Description After upgrading to 5.3.0 from 5.2.2 (standard packages on FreeBSD 12.0), I am experiencing intermittent crashes related to handling of BYE messages. ### Troubleshooting #### Reproduction This happens ~ weekly and I have not found a good way to reproduce it. #### Debugging Data An example backtrace is below from the last dumped core (the SIGSEGV one); unfortunately it overwrote the earlier one: ``` * thread #1, name = 'kamailio', stop reason = signal SIGSEGV * frame #0: 0x00000008009c5b79 libc.so.7`___lldb_unnamed_symbol403$$libc.so.7 + 41 frame #1: 0x00000008009ed63e libc.so.7`__free + 990 frame #2: 0x000000080271562b libthr.so.3`pthread_rwlock_destroy + 59 frame #3: 0x0000000802bedbf6 libcrypto.so.111`CRYPTO_THREAD_lock_free + 22 frame #4: 0x0000000802aef3c4 libcrypto.so.111`RSA_free + 100 frame #5: 0x0000000802b10c32 libcrypto.so.111`EVP_PKEY_free + 66 frame #6: 0x000000080296ed86 libssl.so.111`___lldb_unnamed_symbol646$$libssl.so.111 + 134 frame #7: 0x000000080295f93c libssl.so.111`SSL_CTX_free + 236 frame #8: 0x00000008028aee42 tls.so`tls_free_domain + 114 frame #9: 0x00000008028af1d7 tls.so`tls_free_cfg + 199 frame #10: 0x00000008028af2df tls.so`tls_destroy_cfg + 191 frame #11: 0x00000008028ad1f1 tls.so`destroy_tls_h + 1185 frame #12: 0x000000000041adea kamailio`destroy_tls + 26 frame #13: 0x00000000002e36fd kamailio`cleanup + 269 frame #14: 0x00000000002eb5b7 kamailio`___lldb_unnamed_symbol5$$kamailio + 1351 frame #15: 0x00000000002ea5e5 kamailio`handle_sigs + 21669 frame #16: 0x00000000002fb83e kamailio`main_loop + 40014 frame #17: 0x0000000000307d2b kamailio`main + 50267 frame #18: 0x00000000002e311b kamailio`_start + 283 ``` This is with OpenSSL 1.1 With the LD_PRELOAD hack to 5.2.2, things were completely stable; I am trying to use kamailio without the LD_PRELOAD'ed mutex wrapper now, which I believe is no longer required. It looks like the SSL-related stuff in the TLS crash (which was 5 minutes later!) is unrelated to the initial problem and may just be an artifact of one of the kamailio processes crashing earlier. #### Log Messages ``` Nov 2 08:11:31 home /usr/local/sbin/kamailio[94702]: CRITICAL: {1 527440 BYE 973470944-5061-16392(a)BA.A.B.I} <core> [core/mem/q_malloc.c:149]: qm_debug_check_frag(): BUG: qm: prev. fragm. tail overwritten(c0c0c000, abcdefed)[0x801544c58:0x801544c90]! Memory allocator was called from core: core/action.c:754. Fragment marked by core: core/dset.c:733. Exec from core/mem/q_malloc.c:504. Nov 2 08:13:41 home /usr/local/sbin/kamailio[94703]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 22 Nov 2 08:13:41 home kernel: pid 94702 (kamailio), uid 0: exited on signal 6 (core dumped) Nov 2 08:13:41 home /usr/local/sbin/kamailio[94692]: ALERT: <core> [main.c:767]: handle_sigs(): child process 94702 exited by a signal 6 Nov 2 08:13:41 home /usr/local/sbin/kamailio[94692]: ALERT: <core> [main.c:770]: handle_sigs(): core was generated Nov 2 08:14:56 home login[8284]: ROOT LOGIN (root) ON ttyu0 Nov 2 08:16:26 home kernel: pid 94692 (kamailio), uid 0: exited on signal 11 (core dumped) ``` I had an identical problem a week ago, also with a crash on a BYE for an active call: ``` Oct 27 13:00:02 home /usr/local/sbin/kamailio[79819]: CRITICAL: {1 598425 BYE 649761149-5061-291(a)BA.A.B.I} <core> [core/mem/q_malloc.c:149]: qm_debug_check_frag(): BUG: qm: prev. fragm. tail overwritten(c0c0c000, abcdefed)[0x801551808:0x801551840]! Memory allocator was called from core: core/action.c:754. Fragment marked by core: core/dset.c:733. Exec from core/mem/q_malloc.c:504. Oct 27 13:02:09 home /usr/local/sbin/kamailio[79820]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 22 Oct 27 13:02:09 home kernel: pid 79819 (kamailio), uid 0: exited on signal 6 (core dumped) Oct 27 13:02:09 home /usr/local/sbin/kamailio[79809]: ALERT: <core> [main.c:767]: handle_sigs(): child process 79819 exited by a signal 6 Oct 27 13:02:09 home /usr/local/sbin/kamailio[79809]: ALERT: <core> [main.c:770]: handle_sigs(): core was generated Oct 27 13:04:55 home kernel: pid 79809 (kamailio), uid 0: exited on signal 11 (core dumped) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.3.0 (x86_64/freebsd) 4cc67a flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, select, kqueue. id: 4cc67a compiled on 18:51:34 Oct 25 2019 with cc 6.0 ``` * **Operating System**: FreeBSD 12.0 ``` FreeBSD home.XXX 12.0-RELEASE-p10 FreeBSD 12.0-RELEASE-p10 GENERIC amd64 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2121

2 16

← Newer
1
...
5
6
7
8
9
10
11
...
28
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2019