sr-dev June 2024

sr-dev@lists.kamailio.org

14 participants
217 discussions

[kamailio/kamailio] Kamailio 5.6 (and 5.7) core dumps. (Issue #3725)

by Mattis Lind

### Description We have a quite basic scenario which sends a SIP MESSAGE and then receives SIP MESSAGE back. It also sets up two voice calls using SIP INVITE. It is only this specific scenario that is causing the core dump. Some time the core dump occur just a few seconds after the call/message scenario, but occasionally it takes up to 50 minutes. We have been using the uac module for sending SIP MESSAGE in several other scenarios without experiencing a crash. We always see the same lines in the log just prior to the core dump: CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49 We are using Kamailio 5.6 retrieved from the kamailio repository: http://deb.kamailio.org/kamailio56. We are running Kamailio in a Docker container which runs on "5.10.0-25-cloud-amd64 #1 SMP Debian 5.10.191-1 (2023-08-16) x86_64 GNU/Linux" We have also tried Kamailio 5.7 from the same repo which crashes in exactly the same way. ### Troubleshooting #### Reproduction We have troubles to consistently reproduce it and it only happen from time to time when running a specific scenario sending SIP MESSAGE using the uac module. It does not happen for every call of this call scenario. At one instance Kamailo crashed with just 15 seconds in-between during the call scenario. #### Debugging Data ``` # gdb /usr/sbin/kamailio /core GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git Copyright (C) 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... (No debugging symbols found in /usr/sbin/kamailio) warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 4777] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -DD -M 18 -m 192 -A serverId=17173 -A sendTraceLocal="sip:10'. Program terminated with signal SIGSEGV, Segmentation fault. #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt full #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 No locals. #1 0x00007f5425e34b78 in __vfprintf_internal (s=s@entry=0x55a06e969a60, format=format@entry=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=ap@entry=0x7ffd6bebfb50, mode_flags=mode_flags@entry=0) at vfprintf-internal.c:1647 len = <optimized out> step0_jumps = {0, 1717, 1621, 3413, 3317, 3997, 2677, 2837, 3613, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 4101} space = <optimized out> is_short = <optimized out> use_outdigits = 0 outc = <optimized out> step1_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} group = 0 prec = -1 step2_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} string = 0x756d6f7266222c22 <error: Cannot access memory at address 0x756d6f7266222c22> left = 0 is_long_double = <optimized out> width = 0 signed_number = <optimized out> step3a_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4213, 0, 0, 0, 4389, 2789, 4197, 3917, 3221, 0, 0, 0, 0, 1925, 0, 0, 0, 0, 0, 0} alt = <optimized out> showsign = 0 is_long = 0 is_char = <optimized out> pad = <optimized out> step3b_jumps = {0 <repeats 11 times>, 3517, 0, 0, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} step4_jumps = {0 <repeats 14 times>, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} args_value = <optimized out> is_negative = <optimized out> number = {longlong = <optimized out>, word = <optimized out>} base = <optimized out> the_arg = {pa_wchar = 4777 L'\x12a9', pa_int = 4777, pa_long_int = 4777, pa_long_long_int = 4777, pa_u_int = 4777, pa_u_long_int = 4777, pa_u_long_long_int = 4777, pa_double = 2.3601515901836347e-320, pa_long_double = 1.74131181638025811763e-4947, pa_float128 = 3.09319115455554459548860449034534676e-4962, pa_string = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_wstring = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_pointer = 0x12a9, pa_user = 0x12a9} spec = 115 's' _buffer = {__routine = 0x4, __arg = 0xd, __canceltype = 1855363680, __prev = 0xe0} _avail = <optimized out> thousands_sep = 0x0 grouping = 0xffffffffffffffff <error: Cannot access memory at address 0xffffffffffffffff> done = 238 f = 0x55a06e5580a7 "s:%lu. Exec from %s:%u.\n" lead_str_end = 0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n" end_of_spec = <optimized out> work_buffer = "h\r\000\000\000\000\000\000\000\000\000\000\060\000\000\000\000\000\000\000\375\177\000\000 \372\353k\375\177\000\000\237MSn\n\000\000\000\000\000\000\000\240U", '\000' <repeats 18 times>, "P\225Un\240U\000\000\000\000\000\000[\214A\323\f\000\000\000\000\000\000\000\377\377\377\377\377\377\377\377\206\002", '\000' <repeats 14 times>, "\004\000\000\000\000\000\000\000 \367\353k\375\177\000\000\301\225Un\240U\000\000\323\262\vn\240U\000\000\000\000\000\000\000\000\000\000s\374On\240U\000\000W\225Un\240U\000\000\350>\212\027T\177\000\000 \323\365$T\177\000\000\060\a\354k\375\177\000\00--Type <RET> for more, q to quit, c to continue without paging-- 0\220\371\227n\240U\000\000"... workend = 0x7ffd6bebf9f8 "" ap_save = {{gp_offset = 16, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc30, reg_save_area = 0x7ffd6bebfb70}} nspecs_done = 10 save_errno = 4 readonly_format = 0 do_longlong_number = <optimized out> __result = <optimized out> #2 0x00007f5425ec079f in __vsyslog_internal (pri=<optimized out>, fmt=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=0x7ffd6bebfb50, mode_flags=0) at ../misc/syslog.c:233 now_tm = {tm_sec = 8, tm_min = 18, tm_hour = 12, tm_mday = 23, tm_mon = 0, tm_year = 124, tm_wday = 2, tm_yday = 22, tm_isdst = 0, tm_gmtoff = 0, tm_zone = 0x55a06e94c5e0 "UTC"} now = 1706012288 fd = <optimized out> f = 0x55a06e969a60 buf = 0x0 bufsize = 0 msgoff = 21 saved_errno = <optimized out> failbuf = "`\232\226n\240U\000\000\000\204\201\247[\214A\323`\374\353k\375\177\000\000\300p\371%T" clarg = {buf = <optimized out>, oldaction = <optimized out>} #3 0x00007f5425ec0c46 in __syslog (pri=<optimized out>, fmt=<optimized out>) at ../misc/syslog.c:117 ap = {{gp_offset = 48, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc70, reg_save_area = 0x7ffd6bebfb70}} #4 0x000055a06e3b7839 in ?? () No symbol table info available. #5 0x000055a06e3bc039 in qm_free () No symbol table info available. #6 0x000055a06e3c7c28 in qm_shm_free () No symbol table info available. #7 0x00007f542325fb8e in uac_send_tm_callback () from /usr/lib/x86_64-linux-gnu/kamailio/modules/uac.so No symbol table info available. #8 0x00007f5424a2f002 in run_trans_callbacks_internal () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #9 0x00007f5424a2f179 in run_trans_callbacks () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #10 0x00007f54249d5e8c in free_cell_helper () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #11 0x00007f5424aa8f82 in wait_handler () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #12 0x000055a06e37a263 in ?? () No symbol table info available. #13 0x000055a06e37a79d in ?? () No symbol table info available. #14 0x000055a06e37acc6 in timer_main () No symbol table info available. #15 0x000055a06e0a5f62 in main_loop () No symbol table info available. --Type <RET> for more, q to quit, c to continue without paging-- #16 0x000055a06e0b120c in main () No symbol table info available. (gdb) info locals No locals. (gdb) list 72 in ../sysdeps/x86_64/multiarch/strlen-evex.S ``` #### Log Messages ``` Log file: 2024-01-23T13:18:08.828+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id un0rihsRLJLvP-grn6LO-A 2024-01-23T13:18:08.835+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id WQjhldpRJbxjZRYe7fWgbw 2024-01-23T13:18:08.860+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4795]: CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:783]: handle_sigs(): child process 4777 exited by a signal 11 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:787]: handle_sigs(): core was generated 2024-01-23T13:18:09.516+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 2024-01-23T13:18:09.570+01:00 Started /root/sipconfig/startkamailio.sh 2024-01-23T13:18:09.570+01:00 info: :-) Starting Kamailio ``` #### SIP Traffic ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # /usr/sbin/kamailio -v version: kamailio 5.6.5 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: ``` # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye Linux ip-nn-nn-nn-nn 5.10.0-25-cloud-amd64 #1 SMP Debian 5.10.191-1 (2023-08-16) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3725 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3725(a)github.com>

3 weeks, 6 days

git:5.8:be76a514: tls: remove confusing error message when trying to print socket for <default> server

by Victor Seva

Module: kamailio Branch: 5.8 Commit: be76a51422df3294c533accae1b6a621ee9d3a7d URL: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2024-06-18T18:56:53+02:00 tls: remove confusing error message when trying to print socket for <default> server > CRITICAL: <core> [core/ip_addr.c:232]: ip_addr2sbuf(): unknown address family 0 > NOTICE: tls [tls_domain.c:1176]: ksr_tls_fix_domain(): registered server_name callback handler for socket [:0], server_name='<default>' ... (cherry picked from commit 87c8290ab934fd27f8baebabaf66d1fb4168ba72) --- Modified: src/modules/tls/tls_domain.c --- Diff: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… Patch: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… --- diff --git a/src/modules/tls/tls_domain.c b/src/modules/tls/tls_domain.c index e056a70b504..810a7e9589a 100644 --- a/src/modules/tls/tls_domain.c +++ b/src/modules/tls/tls_domain.c @@ -1155,14 +1155,14 @@ static int ksr_tls_fix_domain(tls_domain_t *d, tls_domain_t *def) d->ctx[i], tls_server_name_cb)) { LM_ERR("register server_name callback handler for socket " "[%s:%d], server_name='%s' failed for proc %d\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>", i); return -1; } if(!SSL_CTX_set_tlsext_servername_arg(d->ctx[i], d)) { LM_ERR("register server_name callback handler data for socket " "[%s:%d], server_name='%s' failed for proc %d\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>", i); return -1; } @@ -1175,7 +1175,7 @@ static int ksr_tls_fix_domain(tls_domain_t *d, tls_domain_t *def) && (d->server_name.len > 0 || (d->type & TLS_DOMAIN_DEF))) { LM_NOTICE("registered server_name callback handler for socket " "[%s:%d], server_name='%s' ...\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>"); } #endif

3 weeks, 6 days

[kamailio/kamailio] github: [skip ci]: bump docker/build-push-action from 5 to 6 (PR #3880)

by dependabot[bot]

Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 5 to 6. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/build-push-action/releases">do… releases</a>.</em></p> <blockquote> <h2>v6.0.0</h2> <ul> <li>Export build record and generate <a href="https://docs.docker.com/build/ci/github-actions/build-summary/&q… summary</a> by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1120&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.24.0 to 0.26.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1132&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1136&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1138&q… <li>Bump braces from 3.0.2 to 3.0.3 in <a href="https://redirect.github.com/docker/build-push-action/pull/1137&q… </ul> <blockquote> <p>[!NOTE] This major release adds support for generating <a href="https://docs.docker.com/build/ci/github-actions/build-summary/&q… summary</a> and exporting build record for your build. You can disable this feature by setting <a href="https://docs.docker.com/build/ci/github-actions/build-summary/#d… <code>DOCKER_BUILD_NO_SUMMARY: true</code> environment variable in your workflow</a>.</p> </blockquote> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.4.0...v6.… <h2>v5.4.0</h2> <ul> <li>Show builder information before building by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1128&q… <li>Handle attestations correctly with provenance and sbom inputs by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1086&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.19.0 to 0.24.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1088&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1105&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1121&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1127&q… <li>Bump undici from 5.28.3 to 5.28.4 in <a href="https://redirect.github.com/docker/build-push-action/pull/1090&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.3.0...v5.… <h2>v5.3.0</h2> <ul> <li>Bump <code>@docker/actions-toolkit</code> from 0.18.0 to 0.19.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1080&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.2.0...v5.… <h2>v5.2.0</h2> <ul> <li>Disable quotes detection for <code>outputs</code> input by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1074&q… <li>Warn about ignored inputs by <a href="https://github.com/favonia"><code>@favonia</co… in <a href="https://redirect.github.com/docker/build-push-action/pull/1019&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.14.0 to 0.18.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1070&q… <li>Bump undici from 5.26.3 to 5.28.3 in <a href="https://redirect.github.com/docker/build-push-action/pull/1057&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.1.0...v5.… <h2>v5.1.0</h2> <ul> <li>Add <code>annotations</code> input by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/992&qu… <li>Add <code>secret-envs</code> input by <a href="https://github.com/elias-lundgren"><code>@elias-l… in <a href="https://redirect.github.com/docker/build-push-action/pull/980&qu… <li>Bump <code>@babel/traverse</code> from 7.17.3 to 7.23.2 in <a href="https://redirect.github.com/docker/build-push-action/pull/991&qu… <li>Bump <code>@docker/actions-toolkit</code> from 0.13.0-rc.1 to 0.14.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/990&qu… <a href="https://redirect.github.com/docker/build-push-action/pull/1006&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.0.0...v5.… </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/docker/build-push-action/commit/c382f710d39a5… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1120… from crazy-max/build-summary</li> <li><a href="https://github.com/docker/build-push-action/commit/5a5b70d974381… chore: update generated content</li> <li><a href="https://github.com/docker/build-push-action/commit/dc24cf9e252ee… don't generate summary for cloud driver</li> <li><a href="https://github.com/docker/build-push-action/commit/667cb22c52a87… DOCKER_BUILD_NO_SUMMARY env to disable summary</li> <li><a href="https://github.com/docker/build-push-action/commit/d880b1964b626… generate build summary</li> <li><a href="https://github.com/docker/build-push-action/commit/e51051ad0baf1… export build record and upload artifact</li> <li><a href="https://github.com/docker/build-push-action/commit/86c2bd0031842… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1137… from docker/dependabot/npm_and_yarn/braces-3.0.3</li> <li><a href="https://github.com/docker/build-push-action/commit/268d2b1611793… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1138… from docker/dependabot/npm_and_yarn/docker/actions-t...</li> <li><a href="https://github.com/docker/build-push-action/commit/2b8dc7f52914d… chore: update generated content</li> <li><a href="https://github.com/docker/build-push-action/commit/840c12be1707e… chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.25.1 to 0.26.0</li> <li>Additional commits viewable in <a href="https://github.com/docker/build-push-action/compare/v5...v6&quot… view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?d… Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3880 -- Commit Summary -- * github: [skip ci]: bump docker/build-push-action from 5 to 6 -- File Changes -- M .github/workflows/alpine.yml (6) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3880.patch https://github.com/kamailio/kamailio/pull/3880.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3880 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3880(a)github.com>

4 weeks

git:master:bc8ff957: github: [skip ci]: bump docker/build-push-action from 5 to 6

by Victor Seva

Module: kamailio Branch: master Commit: bc8ff9572eb2930a08dbfe16c94c7f878a05be72 URL: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… Author: dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2024-06-18T08:39:58+02:00 github: [skip ci]: bump docker/build-push-action from 5 to 6 Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 5 to 6. - [Release notes](https://github.com/docker/build-push-action/releases) - [Commits](https://github.com/docker/build-push-action/compare/v5...v6) --- updated-dependencies: - dependency-name: docker/build-push-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support(a)github.com> --- Modified: .github/workflows/alpine.yml --- Diff: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… Patch: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… --- diff --git a/.github/workflows/alpine.yml b/.github/workflows/alpine.yml index 3bf126e588d..5b888aadd36 100644 --- a/.github/workflows/alpine.yml +++ b/.github/workflows/alpine.yml @@ -139,7 +139,7 @@ jobs: - name: Build and push "-debug" build if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile.debug @@ -158,7 +158,7 @@ jobs: - name: Build and push "-alpine" build if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile.alpine @@ -168,7 +168,7 @@ jobs: - name: Build and push if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile

4 weeks

[kamailio/kamailio] topos: add enable_register_publish (PR #3766)

by Harish S

Added enable_register_publish parameter to enable REGISTER and PUBLISH method for topos If set to 1 REGISTER and PUBLISH will be enabled for topos Currently only via header will be applied for topos and if mask_callid is set to 1 call-ID will be masked. Other headers should be manged by the user as required.   #### Pre-Submission Checklist    - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3766 -- Commit Summary -- * add enable_register_publish -- File Changes -- M src/modules/topos/topos_mod.c (2) M src/modules/topos/tps_msg.c (132) M src/modules/topos/tps_msg.h (2) M src/modules/topos/tps_storage.c (6) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3766.patch https://github.com/kamailio/kamailio/pull/3766.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3766 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3766(a)github.com>

4 weeks

[kamailio/kamailio] K crash v5.5.6 with dlg_profile (Issue #3878)

by Olli Attila

### Description Yesterday we noticed that Kamailio crashed suddenly. There was no major call load on the node, but we did found out that multiple calls were tried to initiate though the node ending with "486 busy here" when the crash happened. User/users tried over and over to make the call happen even though busy was signaled. Our Kamailio is configured to keep count of the dialogs using dialog profiles. ### Troubleshooting Searched logs, what kind of calls were tried to place on the network though the node at the time of the crash and collected the backtrace. #### Debugging Data ``` Kamailio version: kamailio 5.5.6 (x86_64/linux) 72dbb0 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 72dbb0 compiled on 00:00:00 Sep 13 2022 with gcc 11.3.1 OS: Red Hat Enterprise Linux release 9.3 (Plow) Kamailio log when the crash happened: Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417559]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 13 Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417541]: ALERT: <core> [main.c:788]: handle_sigs(): child process 3417545 exited by a signal 11 Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417541]: ALERT: <core> [main.c:791]: handle_sigs(): core was generated Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417541]: INFO: <core> [main.c:813]: handle_sigs(): terminating due to SIGCHLD Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417543]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417551]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417553]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417557]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417544]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417559]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417547]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417548]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417542]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417552]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417554]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417555]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417558]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417556]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Jun 16 19:33:36 voip-proxy3 /usr/sbin/kamailio[3417546]: INFO: <core> [main.c:868]: sig_usr(): signal 15 received Core dump bt full trace: GNU gdb (GDB) Red Hat Enterprise Linux 10.2-11.1.el9_3 Copyright (C) 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... Reading symbols from /usr/lib/debug/usr/sbin/kamailio-5.5.6-0.el9.centos.x86_64.debug... warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 3417545] Missing separate debuginfo for /usr/lib64/kamailio/modules/tls.so Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/08/23cd55ae0236655930f83c342c2b76bc3215c5.debug Missing separate debuginfo for /usr/lib64/kamailio/modules/snmpstats.so Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/bd/ff4c3b08c64459c940abc2fc0f55abd5518619.debug Missing separate debuginfo for /usr/lib64/kamailio/modules/db_mysql.so Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/d1/e37f2e0a33abb8554b3f082e8e0a9aefc0bd76.debug Missing separate debuginfo for /usr/lib64/kamailio/modules/dialplan.so Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/31/e195cc97b19103a6d71de3feff763dc9b21d6d.debug [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio --atexit=no -DD -P /run/kamailio/kamailio.pid -f /etc/kamail'. Program terminated with signal SIGSEGV, Segmentation fault. #0 link_profile (linker=0x7f73efb2d3d8, vkey=0x7f73ef18ecb8) at dlg_profile.c:486 486 p_entry->first->prev->next = &linker->hash_linker; Missing separate debuginfos, use: dnf debuginfo-install audit-libs-3.0.7-104.el9.x86_64 bzip2-libs-1.0.8-8.el9.x86_64 glibc-2.34-83.el9_3.12.x86_64 libacl-2.3.1-3.el9.x86_64 libattr-2.5.1-3.el9.x86_64 libcap-2.48-9.el9_2.x86_64 libcap-ng-0.8.2-7.el9.x86_64 libxcrypt-4.4.18-3.el9.x86_64 libzstd-1.5.1-2.el9.x86_64 lm_sensors-libs-3.6.0-10.el9.x86_64 lua-libs-5.4.4-4.el9.x86_64 mariadb-connector-c-3.2.6-1.el9_0.x86_64 net-snmp-agent-libs-5.9.1-11.el9_3.1.x86_64 net-snmp-libs-5.9.1-11.el9_3.1.x86_64 openssl-libs-3.0.7-25.el9_3.x86_64 pcre-8.44-3.el9.3.x86_64 perl-libs-5.32.1-480.el9.x86_64 popt-1.18-8.el9.x86_64 rpm-libs-4.16.1.3-27.el9_3.x86_64 sqlite-libs-3.34.1-7.el9_3.x86_64 xz-libs-5.2.5-8.el9_0.x86_64 zlib-1.2.11-40.el9.x86_64 (gdb) bt full #0 link_profile (linker=0x7f73efb2d3d8, vkey=0x7f73ef18ecb8) at dlg_profile.c:486 hash = 14 p_entry = 0x7f73eee13730 #1 0x00007f73ed45e4f7 in link_dlg_profile (linker=0x7f73efb2d3d8, dlg=0x7f73ef18ec40) at dlg_profile.c:522 d_entry = 0x7f73eee18ea8 #2 0x00007f73ed45f5d6 in set_dlg_profile (msg=0x7f73f30c3230, value=0x7ffcbf7094f0, profile=0x7f73eee13620) at dlg_profile.c:609 dlg = 0x7f73ef18ec40 linker = 0x7f73efb2d3d8 __func__ = "set_dlg_profile" #3 0x00007f73ed3e089a in w_set_dlg_profile_helper (msg=0x7f73f30c3230, profile=0x7f73eee13620, value=0x7ffcbf7094f0) at dialog.c:825 __func__ = "w_set_dlg_profile_helper" #4 0x00007f73ed3e138b in w_set_dlg_profile (msg=0x7f73f30c3230, profile=0x7f73eee13620 "P7\341\356s\177", value=0x7f73f2f6aa88 "`\327\371\362s\177") at dialog.c:852 pve = 0x7f73f2f6aa88 val_s = {s = 0x7f73f2e6dc30 "xxx", len = 31} __func__ = "w_set_dlg_profile" #5 0x00000000004416f6 in do_action (h=0x7ffcbf70ae60, a=0x7f73f2f9edb0, msg=0x7f73f30c3230) at core/action.c:1091 ret = -5 v = 1 dst = {send_sock = 0x817213, to = {s = {sa_family = 18, sa_data = "\000\000\000\000\000\000\320zt\363s\177\000"}, sin = {sin_family = 18, sin_port = 0, sin_addr = {s_addr = 0}, sin_zero = "\320zt\363s\177\000"}, sin6 = {sin6_family = 18, sin6_port = 0, sin6_flowinfo = 0, sin6_addr = {__in6_u = {__u6_addr8 = "\320zt\363s\177\000\000\000\000\000\000\000\000\000", __u6_addr16 = {31440, 62324, 32627, 0, 0, 0, 0, 0}, __u6_addr32 = {4084497104, 32627, 0, 0}}}, sin6_scope_id = 4075568768}, sas = {ss_family = 18, __ss_padding = "\000\000\000\000\000\000\320zt\363s\177\000\000\000\000\000\000\000\000\000\000\200>\354\362s\177\000\000@\235p\277\374\177\000\000\060\062\f\363s\177\000\000`\256p\277\374\177\000\000P7\354\362s\177\000\000D\235p\277\374\177\000\000\060\062\f\363s\177\000\000`\256p\277\374\177\000\000\320zt\363s\177\000\000\000\000\000\004\000\000\000\000\260\232p\277\374\177\000\000\200\263\240\355s\177\000", __ss_align = 0}}, id = -1083139152, send_flags = {f = 32764, blst_imask = 0}, proto = 0 '\000', proto_pad0 = 0 '\000', proto_pad1 = 0} tmp = 0x1f2dff010 <error: Cannot access memory at address 0x1f2dff010> new_uri = 0x5d23df <rval_expr_eval_int+131> "\211E̋E\314\301\350\037\017\266\300H\205\300\017\204p\036" end = 0x7ffcbf709c20 "\220\235p\277\374\177" crt = 0x7ffcbf709c00 "\220\235p\277\374\177" cmd = 0x7f73f2eb0db0 len = 32627 user = -219400368 uri = {user = {s = 0x7f73f2ec3770 "\002", len = -217304528}, passwd = {s = 0x1f3747ad0 <error: Cannot access memory at address 0x1f3747ad0>, len = 10194964}, host = {s = 0x7ffcbf709900 "\260\231p\277\374\177", len = -311958360}, port = {s = 0x7f73f2ef7a88 "\004", len = -1083138808}, params = {s = 0x7f73f2ec3770 "\002", len = -217304528}, sip_params = { --Type <RET> for more, q to quit, c to continue without paging-- s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, headers = { s = 0x7ffcbf709980 "02\f\363s\177", len = 4519307}, port_no = 0, proto = 0, type = ERROR_URI_T, flags = (unknown: 0xf30c3230), transport = { s = 0x7f73f2ef6ee0 <incomplete sequence \344>, len = -1083134368}, ttl = { s = 0x7f73f2e63a28 "SDj4oqe01-38b51cd5c133af2f2994e7b7149891fe-v300g00030::re_analyse_customer", len = 74}, user_param = { s = 0x100000000 <error: Cannot access memory at address 0x100000000>, len = 139952309}, maddr = {s = 0x7f73f2ec0ff0 "e\017\354\362s\177", len = -217679816}, method = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 0}, lr = { s = 0x817213 "INFO", len = 18}, r2 = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, gr = {s = 0x7ffcbf7099b0 "\200>\354\362s\177", len = 5686778}, transport_val = {s = 0x1 <error: Cannot access memory at address 0x1>, len = -1083138808}, ttl_val = {s = 0x7f73f2ec3758 "\026", len = -217304528}, user_param_val = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, maddr_val = { s = 0x7ffcbf709ab0 " \234p\277\374\177", len = 6104031}, method_val = {s = 0x7ffcbf709a00 "\260\232p\277\374\177", len = -308238037}, lr_val = {s = 0x7ffcbf709bb0 "\005", len = -219195016}, r2_val = {s = 0x7f73f2ef7a80 "\001", len = -1083139116}, gr_val = { s = 0x7f73f30c3230 "\236\235\177", len = 0}} next_hop = {user = {s = 0x0, len = 0}, passwd = {s = 0x0, len = 0}, host = {s = 0x817213 "INFO", len = 18}, port = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, params = { s = 0x7ffcbf7097d0 "\360\227p\277\374\177", len = 5688750}, sip_params = {s = 0x7ffcbf7097bc "\001", len = -287473952}, headers = { s = 0x9b9000 <ut_buf_int2str> "", len = 0}, port_no = 38720, proto = 49008, type = 32764, flags = (URI_USER_NORMALIZE | URI_SIP_USER_PHONE | unknown: 0xed64fae8), transport = { s = 0x10091dc88 <error: Cannot access memory at address 0x10091dc88>, len = -287473952}, ttl = {s = 0x7ffcbf709750 "p\227p\277\374\177", len = -312148998}, user_param = {s = 0x7f73f2ebe4d8 "(", len = -287473952}, maddr = {s = 0x7ffcbf709770 "\320zt\363s\177", len = -312143558}, method = {s = 0x7ffcbf709770 "\320zt\363s\177", len = 0}, lr = {s = 0x817213 "INFO", len = 18}, r2 = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, gr = { s = 0x7ffcbf7097d0 "\360\227p\277\374\177", len = 5628632}, transport_val = {s = 0x7ffcbf709824 "\001", len = -293364992}, ttl_val = { s = 0x9b9000 <ut_buf_int2str> "", len = 1}, user_param_val = {s = 0x817213 "INFO", len = 18}, maddr_val = { s = 0x9b9014 <ut_buf_int2str+20> "1", len = 67108864}, method_val = {s = 0x7ffcbf7097f0 "0\230p\277\374\177", len = 5628752}, lr_val = { s = 0x7ffcbf709824 "\001", len = 1}, r2_val = {s = 0x7ffcbf709830 "", len = 5651808}, gr_val = { s = 0x1bf709830 <error: Cannot access memory at address 0x1bf709830>, len = -1083138808}} u = 0x5 port = 0 dst_host = 0x4000000 i = 4 flags = 0 avp = 0x41c9b8 <dlsym@plt+8> st = {flags = 4077761328, id = 32627, name = {n = 0, s = {s = 0x0, len = -219425232}, re = 0x0}, avp = 0x7f73f30c3230} sct = 0x7f73f2ec3e78 sjt = 0x5d603b <rval_expr_eval_rvint+7593> rve = 0x7f73f2f84a70 --Type <RET> for more, q to quit, c to continue without paging-- mct = 0x7ffcbf709d40 rv = 0x7f73ed5d3474 <w_ds_is_from_list1+946> rv1 = 0x7ffcbf70a284 c1 = {cache_type = 3211826896, val_type = 32764, c = {avp_val = {n = 5686778, s = { s = 0x56c5fa <pv_get_spec_value+879> "\211Ẽ", <incomplete sequence \314>, len = -1083140528}, re = 0x56c5fa <pv_get_spec_value+879>}, pval = {rs = {s = 0x56c5fa <pv_get_spec_value+879> "\211Ẽ", <incomplete sequence \314>, len = -1083140528}, ri = -1083140272, flags = 32764}}, i2s = "\030\021\354\362s\177\000\000\060\062\f\363s\177\000\000\000\227p\277\374\177"} s = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864} srevp = {0x817213, 0x12} evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} mod_f_params = {{type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, { type = NUMBER_ST, u = {number = 2, string = 0x2 <error: Cannot access memory at address 0x2>, str = { s = 0x2 <error: Cannot access memory at address 0x2>, len = 0}, data = 0x2, attr = 0x2, select = 0x2}}, {type = RVE_FREE_FIXUP_ST, u = { number = 0, string = 0x0, str = {s = 0x0, len = 1}, data = 0x0, attr = 0x0, select = 0x0}}, {type = MODFIXUP_ST, u = { number = 140135975607040, string = 0x7f73f30bdb00 "\220\332\v\363s\177", str = {s = 0x7f73f30bdb00 "\220\332\v\363s\177", len = 2}, data = 0x7f73f30bdb00, attr = 0x7f73f30bdb00, select = 0x7f73f30bdb00}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = { s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}} __func__ = "do_action" #6 0x000000000044eee9 in run_actions (h=0x7ffcbf70ae60, a=0x7f73f2f27bf8, msg=0x7f73f30c3230) at core/action.c:1584 t = 0x7f73f2f9edb0 ret = 1 tvb = {tv_sec = 0, tv_usec = 0} tve = {tv_sec = 0, tv_usec = 0} tz = {tz_minuteswest = 0, tz_dsttime = 0} tdiff = 5628752 __func__ = "run_actions" #7 0x000000000043daae in do_action (h=0x7ffcbf70ae60, a=0x7f73f2ec7fc0, msg=0x7f73f30c3230) at core/action.c:703 ret = -5 v = 1 dst = {send_sock = 0x7ffcbf70a290, to = {s = {sa_family = 50682, sa_data = "V\000\v\000\000\000\a\000\000\000\000\000\000"}, sin = { sin_family = 50682, sin_port = 86, sin_addr = {s_addr = 11}, sin_zero = "\a\000\000\000\000\000\000"}, sin6 = {sin6_family = 50682, sin6_port = 86, sin6_flowinfo = 11, sin6_addr = {__in6_u = {__u6_addr8 = "\a\000\000\000\000\000\000\000\337\023of\000\000\000", __u6_addr16 = {7, 0, 0, 0, 5087, 26223, 0, 0}, __u6_addr32 = {7, 0, 1718555615, 0}}}, sin6_scope_id = 33089760}, sas = { ss_family = 50682, --Type <RET> for more, q to quit, c to continue without paging-- __ss_padding = "V\000\v\000\000\000\a\000\000\000\000\000\000\000\337\023of\000\000\000\000\340\350\370\001\000\000\000\000X\000\000\000\000\000\000\000\337\023of\000\000\000\000\261\071\344-\000\000\000\000#\000\000\000!", '\000' <repeats 11 times>, "\005\000\000\000|\000\000\000\000\000\000\000\247\000\000\000\001\000\000\000\374\177\000\000\060*\000\000\000\000\000\000p\033\306\001\000\000\000\000Ȗ\203\356\000\000\000", __ss_align = 140135982463696}}, id = 0, send_flags = {f = 1, blst_imask = 0}, proto = 0 '\000', proto_pad0 = 0 '\000', proto_pad1 = 0} tmp = 0x7f73f2ebc8f0 "\002" new_uri = 0x5d29a4 <rval_expr_eval_int+1608> "\211E̋E\314\301\350\037\017\266\300H\205\300\017\205\272\030" end = 0x7ffcbf70a470 "\340\245p\277\374\177" crt = 0x7f73f2ebc988 "\001" cmd = 0x7f73f315ca68 len = 0 user = 5268014 uri = {user = {s = 0x7f73f30c3230 "\236\235\177", len = -1083134368}, passwd = {s = 0x7ffcbf70a270 "", len = -219409808}, host = { s = 0x7ffcbf70a2b4 "\001", len = -1083137496}, port = {s = 0x7f73f30c3230 "\236\235\177", len = -1083134368}, params = { s = 0x7f73f30c3230 "\236\235\177", len = -1083134368}, sip_params = { s = 0x35343537313433fb <error: Cannot access memory at address 0x35343537313433fb>, len = -994177024}, headers = { s = 0x7f73f37f7dc0 <_nl_C_LC_TIME> "\235\234{\363s\177", len = -994177024}, port_no = 42480, proto = 500, type = ERROR_URI_T, flags = (unknown: 0x2010), transport = {s = 0x71 <error: Cannot access memory at address 0x71>, len = 33089744}, ttl = { s = 0x7f73f37fac80 <main_arena> "", len = 33097952}, user_param = {s = 0x1900000001 <error: Cannot access memory at address 0x1900000001>, len = -1083136992}, maddr = {s = 0x7ffcbf70a120 "\340\350\370\001", len = -1083137536}, method = { s = 0x1f8e8e0 "<134>Jun 16 19:33:35 /usr/sbin/kamailio[3417545]: INFO: <script>: [j4oqe] A_PROFILE = S=hel-sbc;FMTIN=SUBABR;SOTEAC=104;DLGLIMIT=1000", len = -219409800}, lr = {s = 0x1 <error: Cannot access memory at address 0x1>, len = 33089744}, r2 = {s = 0x7f73f37fac80 <main_arena> "", len = -994177024}, gr = {s = 0x0, len = 5697090}, transport_val = {s = 0xb <error: Cannot access memory at address 0xb>, len = 0}, ttl_val = {s = 0x817213 "INFO", len = 18}, user_param_val = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, maddr_val = { s = 0x7ffcbf70a300 "p\244p\277\374\177", len = 6106005}, method_val = {s = 0x7ffcbf70a300 "p\244p\277\374\177", len = -211093163}, lr_val = {s = 0x1f4a5f0 ":j\346\001", len = -211240841}, r2_val = {s = 0x7f73f2ec20d0 "\031", len = -1083136992}, gr_val = { s = 0x7f73f30c3230 "\236\235\177", len = -1083134368}} next_hop = {user = {s = 0x0, len = 0}, passwd = {s = 0x0, len = 0}, host = {s = 0x817213 "INFO", len = 18}, port = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 0}, params = {s = 0x7f73f2ec19a8 "\001", len = -1083137360}, sip_params = {s = 0x7f73f30c3230 "\236\235\177", len = -1083134368}, headers = {s = 0x7f73f2ec1278 "\a", len = -1083137356}, port_no = 12848, proto = 62220, type = 32627, flags = (unknown: 0xbf70ae60), transport = { s = 0x7ffcbf70a010 "\320zt\363s\177", len = -217304528}, ttl = {s = 0x7f73f2ebe4d8 "(", len = -1083134368}, user_param = {s = 0x0, len = 0}, maddr = {s = 0x100817213 <error: Cannot access memory at address 0x100817213>, len = 0}, method = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, lr = { s = 0x7ffcbf70a060 "02\f\363s\177", len = 5968374}, r2 = { s = 0xecb1845e031780b5 <error: Cannot access memory at address 0xecb1845e031780b5>, len = -217304528}, gr = {s = 0x7f73f2ec0638 "\002", len = -1083134368}, transport_val = {s = 0x0, len = 0}, ttl_val = {s = 0x817213 "INFO", len = 0}, user_param_val = {s = 0x817213 "INFO", --Type <RET> for more, q to quit, c to continue without paging-- len = 18}, maddr_val = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864}, method_val = { s = 0x7ffcbf70a190 "", len = 6104031}, lr_val = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 0}, r2_val = {s = 0x7ffcbf70a190 "", len = 6119483}, gr_val = {s = 0x7f73f2ec19a0 "\001", len = -1083137360}} u = 0x7ffcbf70a500 port = 0 dst_host = 0x56cdae <pv_printf_mode+1759> i = 5 flags = -1 avp = 0x7f73f3747ad0 <syslog> st = {flags = 3211829568, id = 32764, name = {n = -1083137792, s = {s = 0x7ffcbf70a100 "\001", len = -209736576}, re = 0x7ffcbf70a100}, avp = 0xc06abc75c4be1000} sct = 0x7f73f2ec2800 sjt = 0x4000000 rve = 0x7f73f2ec45a8 mct = 0x7ffcbf70a590 rv = 0x6cbf77 <search_next_avp+1782> rv1 = 0x12 c1 = {cache_type = 3211829024, val_type = 32764, c = {avp_val = {n = 5686778, s = { s = 0x56c5fa <pv_get_spec_value+879> "\211Ẽ", <incomplete sequence \314>, len = 0}, re = 0x56c5fa <pv_get_spec_value+879>}, pval = { rs = {s = 0x56c5fa <pv_get_spec_value+879> "\211Ẽ", <incomplete sequence \314>, len = 0}, ri = -1083137416, flags = 32764}}, i2s = "\200\022\354\362s\177\000\000\060\062\f\363s\177\000\000`\237p\277\374\177"} s = {s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = 67108864} srevp = {0x817213, 0x12} evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} mod_f_params = {{type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, { type = NUMBER_ST, u = {number = 2, string = 0x2 <error: Cannot access memory at address 0x2>, str = { s = 0x2 <error: Cannot access memory at address 0x2>, len = 0}, data = 0x2, attr = 0x2, select = 0x2}}, {type = RVE_FREE_FIXUP_ST, u = { number = 0, string = 0x0, str = {s = 0x0, len = 1}, data = 0x0, attr = 0x0, select = 0x0}}, {type = MODFIXUP_ST, u = { number = 140135975607040, string = 0x7f73f30bdb00 "\220\332\v\363s\177", str = {s = 0x7f73f30bdb00 "\220\332\v\363s\177", len = 2}, data = 0x7f73f30bdb00, attr = 0x7f73f30bdb00, select = 0x7f73f30bdb00}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = { s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}} __func__ = "do_action" #8 0x000000000044eee9 in run_actions (h=0x7ffcbf70ae60, a=0x7f73f2ec7180, msg=0x7f73f30c3230) at core/action.c:1584 t = 0x7f73f2ec7fc0 --Type <RET> for more, q to quit, c to continue without paging-- ret = 1 tvb = {tv_sec = 0, tv_usec = 0} tve = {tv_sec = 0, tv_usec = 0} tz = {tz_minuteswest = 0, tz_dsttime = 0} tdiff = 18 __func__ = "run_actions" #9 0x0000000000441544 in do_action (h=0x7ffcbf70ae60, a=0x7f73f2edb190, msg=0x7f73f30c3230) at core/action.c:1070 ret = 1 v = 1 dst = {send_sock = 0x7ffcbf70ab30, to = {s = {sa_family = 12309, sa_data = "o\000\000\000\000\000\030q\006\363s\177\000"}, sin = { sin_family = 12309, sin_port = 111, sin_addr = {s_addr = 0}, sin_zero = "\030q\006\363s\177\000"}, sin6 = {sin6_family = 12309, sin6_port = 111, sin6_flowinfo = 0, sin6_addr = {__in6_u = {__u6_addr8 = "\030q\006\363s\177\000\000ȴ\r\363s\177\000", __u6_addr16 = { 28952, 62214, 32627, 0, 46280, 62221, 32627, 0}, __u6_addr32 = {4077285656, 32627, 4077761736, 32627}}}, sin6_scope_id = 3211832254}, sas = {ss_family = 12309, __ss_padding = "o\000\000\000\000\000\030q\006\363s\177\000\000ȴ\r\363s\177\000\000\276\253p\277\374\177\000\000\277\253p\277\374\177\000\000ג\232\000\000\000\000\000\207\217\232\000\000\000\000\000\070\204\210\000\000\000\000\000X\222\210\000\000\000\000\000@\000\000\000\000\000\000\000\020\360\337\362s\177\000\000\317v\331\362s\177", '\000' <repeats 12 times>, "\200\000\000\000\000\000`\333H\000\000\000\000", __ss_align = 2564280}}, id = 3613856, send_flags = {f = 0, blst_imask = 1285}, proto = -72 '\270', proto_pad0 = -55 '\311', proto_pad1 = 65} tmp = 0x6f347e <qm_malloc+2449> "H\213E\270H\203\300\070\351Q\003" new_uri = 0x6fc5e1 <qm_info+46> "H\213E\370H\213P\bH\213E\340H\211\020H\213E\340H\307@(\b" end = 0xe8 <error: Cannot access memory at address 0xe8> crt = 0x7ffcbf70ad50 "P\256p\277\374\177" cmd = 0x7f73f2ea8a48 len = 0 user = 10129593 uri = {user = {s = 0x7ffcbf70a910 "@\251p\277\374\177", len = -306704723}, passwd = { s = 0xcf3747ad0 <error: Cannot access memory at address 0xcf3747ad0>, len = 0}, host = {s = 0x800000 <_IO_stdin_used> "\001", len = 4774584}, port = {s = 0x4002720f8 <error: Cannot access memory at address 0x4002720f8>, len = 8943776}, params = { s = 0x41c9b8 <dlsym@plt+8> "", len = 8}, sip_params = {s = 0x7ffcbf70aa30 "0\253p\277\374\177", len = 7759464}, headers = { s = 0x7ffcbf70a940 "\220\256\r\363s\177", len = 4964313}, port_no = 0, proto = 0, type = ERROR_URI_T, flags = (unknown: 0x86f0d4), transport = {s = 0x7ffcbf70aa30 "0\253p\277\374\177", len = 7286805}, ttl = {s = 0x7f73f30dae90 "\001", len = -217682128}, user_param = { s = 0x7ffcbf70aabe "\005\005\270\311A", len = -1083135297}, maddr = {s = 0x9a92d7 <buf+1079> "", len = 10129198}, method = { s = 0x888438 <__func__.3> "parse_via", len = 8950360}, lr = {s = 0x40 <error: Cannot access memory at address 0x40>, len = 7325153}, r2 = { s = 0x7ffcbf70a9d0 "", len = -220205040}, gr = {s = 0x7f73f30db538 "p", len = -220205040}, transport_val = { s = 0x7ffcbf70aa10 "@\252p\277\374\177", len = -306704723}, ttl_val = { s = 0xe00000030 <error: Cannot access memory at address 0xe00000030>, len = 0}, user_param_val = {s = 0x800000 <_IO_stdin_used> "\001", len = 4774048}, maddr_val = {s = 0x4002722a8 <error: Cannot access memory at address 0x4002722a8>, len = 8943776}, method_val = { --Type <RET> for more, q to quit, c to continue without paging-- s = 0x41c9b8 <dlsym@plt+8> "", len = 8}, lr_val = {s = 0x7ffcbf70ab30 "", len = 7759464}, r2_val = { s = 0x7ffcbf70aa40 "\030q\006\363s\177", len = 4964313}, gr_val = {s = 0x0, len = 8843476}} next_hop = {user = {s = 0x400bf70a760 <error: Cannot access memory at address 0x400bf70a760>, len = -274094048}, passwd = { s = 0x7ffcbf70a860 "\030\220\233", len = -291376120}, host = {s = 0x7ffcbf70a770 "\240\247p\277\374\177", len = -221810361}, port = { s = 0x7ffcbf70a780 "\240\247p\277\002", len = -221810334}, params = {s = 0x7ffcbf70a7a0 "", len = -291376120}, sip_params = { s = 0x2bf70a7a0 <error: Cannot access memory at address 0x2bf70a7a0>, len = -220676760}, headers = { s = 0x9a8f04 <buf+100> "=a92.6fd>\r\nVia: SIP/2.0/UDP 172.19.194.20;branch=z9hG4bKa617.ff0b5b66aa6563c47d53617f4dbe74b8.0\r\nVia: SIP/2.0/UDP 172.20.14.4:5060;branch=z9hG4bK87n3qi108gc8rbe9pi50.1\r\nMax-Forwards: 67\r\nFrom: \"HUONE_"..., len = -282320808}, port_no = 43264, proto = 49008, type = 32764, flags = 0, transport = {s = 0x9b8ec0 <def_list> "\210\237\024\357s\177", len = 10194984}, ttl = { s = 0x7f73f3747ad0 <syslog> "\363\017\036\372H\201\354", <incomplete sequence \330>, len = -274093472}, user_param = { s = 0x7ffcbf70a8d0 "", len = -221447870}, maddr = {s = 0x7ffcbf70a900 "0\252p\277\374\177", len = -274094048}, method = { s = 0x400bf70ac60 <error: Cannot access memory at address 0x400bf70ac60>, len = -274093928}, lr = { s = 0xffffffffbf70a830 <error: Cannot access memory at address 0xffffffffbf70a830>, len = 1}, r2 = { s = 0x50bf70a930 <error: Cannot access memory at address 0x50bf70a930>, len = -274093912}, gr = { s = 0x7f73efb402f0 "KDMQ sip:dialog@172.19.194.28:5060 SIP/2.0\r\nVia: SIP/2.0/UDP 172.19.194.20;branch=z9hG4bK5d89.f6002b35", '0' <repeats 24 times>, ".0\r\nTo: <sip:dialog@172.19.194.28:5060>\r\nFrom: <sip:dialog@172.19.194.20:5"..., len = -1083134880}, transport_val = { s = 0x7ffcbf70a9c8 "", len = -1083135540}, ttl_val = {s = 0xc800000000 <error: Cannot access memory at address 0xc800000000>, len = -274094048}, user_param_val = {s = 0x9b9028 <_xavi_list_head> "", len = 10194976}, maddr_val = {s = 0x9b9018 <_xavp_list_head> "", len = 10194664}, method_val = {s = 0x1 <error: Cannot access memory at address 0x1>, len = 0}, lr_val = {s = 0x817213 "INFO", len = 7325153}, r2_val = {s = 0x7ffcbf70a8d0 "", len = -220205040}, gr_val = {s = 0x7f73f3066fa0 "`", len = -220205040}} u = 0x9a92d7 <buf+1079> port = 0 dst_host = 0x7f73f30db490 i = 2 flags = 32764 avp = 0x875a18 <__func__.21> st = {flags = 4012646488, id = 32627, name = {n = -293601280, s = {s = 0x7f73ee800000 "", len = -1083136048}, re = 0x7f73ee800000}, avp = 0x7f73ed4b0c06 <dmq_tm_callback+2807>} sct = 0x7ffcbf70abe0 sjt = 0x7f73f2dff010 rve = 0x7f73f2ec2f30 mct = 0x7f73edb80ead <pkg_proc_update_stats+115> rv = 0x7f73ed4d8a9c rv1 = 0x72eeb1 <parse_cseq+2542> c1 = {cache_type = 4084497104, val_type = 32627, c = {avp_val = {n = 67108864, s = { s = 0x104000000 <error: Cannot access memory at address 0x104000000>, len = -1083136240}, re = 0x104000000}, pval = {rs = { s = 0x104000000 <error: Cannot access memory at address 0x104000000>, len = -1083136240}, ri = 7335103, flags = 0}}, --Type <RET> for more, q to quit, c to continue without paging-- i2s = "\242\207M\355s\177\000\000\000\000\200\356G\000\000\000\360\210M\355s\177"} s = {s = 0x817213 "INFO", len = -293366072} srevp = {0x7ffcbf70a6d0, 0x6eff50 <futex_release+29>} evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} mod_f_params = {{type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, { type = NUMBER_ST, u = {number = 2, string = 0x2 <error: Cannot access memory at address 0x2>, str = { s = 0x2 <error: Cannot access memory at address 0x2>, len = 0}, data = 0x2, attr = 0x2, select = 0x2}}, {type = RVE_FREE_FIXUP_ST, u = { number = 0, string = 0x0, str = {s = 0x0, len = 1}, data = 0x0, attr = 0x0, select = 0x0}}, {type = MODFIXUP_ST, u = { number = 140135975607040, string = 0x7f73f30bdb00 "\220\332\v\363s\177", str = {s = 0x7f73f30bdb00 "\220\332\v\363s\177", len = 2}, data = 0x7f73f30bdb00, attr = 0x7f73f30bdb00, select = 0x7f73f30bdb00}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = { s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}, {type = NOSUBTYPE, u = {number = 0, string = 0x0, str = {s = 0x0, len = 0}, data = 0x0, attr = 0x0, select = 0x0}}} __func__ = "do_action" #10 0x000000000044eee9 in run_actions (h=0x7ffcbf70ae60, a=0x7f73f2eb81c0, msg=0x7f73f30c3230) at core/action.c:1584 t = 0x7f73f2edb190 ret = 1 tvb = {tv_sec = 0, tv_usec = 0} tve = {tv_sec = 0, tv_usec = 0} tz = {tz_minuteswest = -217304528, tz_dsttime = 32627} tdiff = 4077287896 __func__ = "run_actions" #11 0x000000000044f653 in run_top_route (a=0x7f73f2eb81c0, msg=0x7f73f30c3230, c=0x0) at core/action.c:1669 ctx = {rec_lev = 3, run_flags = 0, last_retcode = 1, jmp_env = {{__jmpbuf = {4294967296, -1391185268927135563, 8483347, 18, 140135982463696, 67108864, -1391185268977467211, 1389635598856192181}, __mask_was_saved = 0, __saved_mask = {__val = {6227793, 4294967752, 140135975629360, 8483347, 18, 140135982463696, 67108864, 140135975632848, 10129605, 140135975252904, 0, 4611686022722355200, 0, 4294967296, 4294967296, 8483347}}}}} p = 0x7ffcbf70ae60 ret = -210470192 sfbk = 0 #12 0x000000000058652e in receive_msg ( buf=0x9a8ea0 <buf> "INVITE sip:yyy@hostname:5060 SIP/2.0\r\nRecord-Route: <sip:172.19.194.20;lr;did=a92.6fd>\r\nVia: SIP/2.0/UDP 172.19.194.20;branch=z9hG4bKa617.ff0b5b66aa6563c47d53617f4dbe74b8.0\r\nVia"..., len=1079, rcv_info=0x7ffcbf70b4d0) at core/receive.c:501 msg = 0x7f73f30c3230 ctx = {rec_lev = 0, run_flags = 0, last_retcode = 0, jmp_env = {{__jmpbuf = {4702111234474983745, 4702111234474983745, 4702111234474983745, 4702111234474983745, 0, 0, 0, 0}, __mask_was_saved = 437918234, __saved_mask = {__val = {1880844493789993498, 1880844493789993498, --Type <RET> for more, q to quit, c to continue without paging-- 1880844493789993498, 0, 0, 0, 0, 2314885530818453536, 2314885530818453536, 2314885530818453536, 2314885530818453536, 0, 0, 0, 0, 4702111234474983745}}}}} bctx = 0x0 ret = 0 tvb = {tv_sec = 0, tv_usec = 0} tve = {tv_sec = 0, tv_usec = 0} diff = 0 inb = { s = 0x9a8ea0 <buf> "INVITE sip:yyy@hostname:5060 SIP/2.0\r\nRecord-Route: <sip:172.19.194.20;lr;did=a92.6fd>\r\nVia: SIP/2.0/UDP 172.19.194.20;branch=z9hG4bKa617.ff0b5b66aa6563c47d53617f4dbe74b8.0\r\nVia"..., len = 1079} netinfo = {data = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0} keng = 0x0 evp = {data = 0x7ffcbf70b040, obuf = {s = 0x0, len = 0}, rcv = 0x7ffcbf70b4d0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} cidlockidx = 0 cidlockset = 0 errsipmsg = 0 exectime = 0 __func__ = "receive_msg" #13 0x00000000006c860a in udp_rcv_loop () at core/udp_server.c:543 len = 1079 buf = "INVITE sip:yyy@hostname:5060 SIP/2.0\r\nRecord-Route: <sip:172.19.194.20;lr;did=a92.6fd>\r\nVia: SIP/2.0/UDP 172.19.194.20;branch=z9hG4bKa617.ff0b5b66aa6563c47d53617f4dbe74b8.0\r\nVia"... tmp = 0x1eee34928 <error: Cannot access memory at address 0x1eee34928> fromaddr = 0x7f73f30d68d8 fromaddrlen = 16 rcvi = {src_ip = {af = 2, len = 4, u = {addrl = {348263340, 0}, addr32 = {348263340, 0, 0, 0}, addr16 = {5036, 5314, 0, 0, 0, 0, 0, 0}, addr = "\254\023\302\024", '\000' <repeats 11 times>}}, dst_ip = {af = 2, len = 4, u = {addrl = {348263340, 0}, addr32 = {348263340, 0, 0, 0}, addr16 = {5036, 5314, 0, 0, 0, 0, 0, 0}, addr = "\254\023\302\024", '\000' <repeats 11 times>}}, src_port = 5060, dst_port = 5060, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 2, sa_data = "\023Ĭ\023\302\024\000\000\000\000\000\000\000"}, sin = {sin_family = 2, sin_port = 50195, sin_addr = {s_addr = 348263340}, sin_zero = "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = 50195, sin6_flowinfo = 348263340, sin6_addr = { __in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}, sin6_scope_id = 0}, sas = {ss_family = 2, __ss_padding = "\023Ĭ\023\302\024", '\000' <repeats 111 times>, __ss_align = 0}}, bind_address = 0x7f73f2e91490, rflags = 0, proto = 1 '\001', proto_pad0 = 0 '\000', proto_pad1 = 0} evp = {data = 0x0, obuf = {s = 0x0, len = 0}, rcv = 0x0, dst = 0x0, req = 0x0, rpl = 0x0, rplcode = 0, mode = 0} printbuf = '\000' <repeats 88 times>, "\320>\343\356s\177\000\000\023r\201\000\000\000\000\000\022\000\000\000\000\000\000\000\320zt\363s\177\000\000\000\000\000\004\000\000\000\000гp\277\374\177\000\000m\301b", '\000' <repeats 41 times>, "\004\000\000\000\350\006\353\362\004", '\000' <repeats 91--Type <RET> for more, q to quit, c to continue without paging-- times>... i = -1 j = 43776 l = 4 __func__ = "udp_rcv_loop" #14 0x000000000042c56a in main_loop () at main.c:1730 i = 3 pid = 0 si = 0x7f73f2e91490 si_desc = "udp receiver child=3 sock=172.19.194.20:5060\000\000\000\000@\274p\277\374\177\000\000\023r\201\000\000\000\000\000\022\000\000\000\000\000\000\000\320zt\363s\177\000\000H\212\352\362s\177\000\000j{t\363s\177\000\000\060\000\000\000\060\000\000\000\370\267p\277\374\177\000\000\020\267p\277\374\177\000\000\000\020\276\304u\274j\300" nrprocs = 4 woneinit = 1 __func__ = "main_loop" #15 0x0000000000438191 in main (argc=11, argv=0x7ffcbf70bd58) at main.c:3061 cfg_stream = 0x1b9a2d0 c = -1 r = 0 tmp = 0x7ffcbf70deb7 "" tmp_len = 0 port = 0 proto = 0 ahost = 0x0 aport = 0 options = 0x803128 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2043858912 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 2 n_lst = 0x40 p = 0x1600000 <error: Cannot access memory at address 0x1600000> st = {st_dev = 25, st_ino = 179668, st_nlink = 2, st_mode = 16832, st_uid = 978, st_gid = 978, __pad0 = 0, st_rdev = 0, st_size = 100, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1717103055, tv_nsec = 713677547}, st_mtim = {tv_sec = 1717103910, tv_nsec = 470641633}, st_ctim = {tv_sec = 1717103910, tv_nsec = 470641633}, __glibc_reserved = {0, 0, 0}} --Type <RET> for more, q to quit, c to continue without paging-- tbuf = "\342\\\256\363s\177\000\000\070\033\253\363s\177\000\000йp\277\374\177\000\000\a\000\000\000\000\000\000\000\330\b\253\363s\177\000\000\a\000\000\000#\000\000\000\060j\256\363s\177\000\000\005\067\254\363s\177\000\000\000\000\000\000\000\000\000\000\320I\254\363s\177\000\000\070\000a\363s\177\000\000\020\353\252\363s\177\000\000\000\000\000\000\000\000\000\000\001\000\000\000\000\000\000\000\240\271p\277\374\177\000\000\330\032\253\363s\177\000\000\330\032\253\363s\177\000\000\000\000\000\000\000\000\000\000\270\371\252\363s\177\000\000\240\271p\277\374\177\000\000\220u\256\363s\177\000\000\000\000\253\363s\177\000\000\022\f\253\363s\177\000\000F\001\254\363s\177\000\000\344#`\363s\177\000\000\232"... option_index = 12 long_options = {{name = 0x805796 "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x8004f4 "version", has_arg = 0, flag = 0x0, val = 118}, { name = 0x80579b "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x8057a1 "subst", has_arg = 1, flag = 0x0, val = 1025}, { name = 0x8057a7 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x8057b0 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, { name = 0x8057ba "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x8057c4 "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, { name = 0x8057cf "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x8057d8 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, { name = 0x8057e3 "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x8057e9 "cfg-print", has_arg = 0, flag = 0x0, val = 1033}, { name = 0x8057f3 "atexit", has_arg = 1, flag = 0x0, val = 1034}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __func__ = "main" (gdb) (gdb) info locals hash = 14 p_entry = 0x7f73eee13730 (gdb) list 481 p_entry = &linker->profile->entries[hash]; 482 lock_get( &linker->profile->lock ); 483 if (p_entry->first) { 484 linker->hash_linker.prev = p_entry->first->prev; 485 linker->hash_linker.next = p_entry->first; 486 p_entry->first->prev->next = &linker->hash_linker; 487 p_entry->first->prev = &linker->hash_linker; 488 } else { 489 p_entry->first = linker->hash_linker.next 490 = linker->hash_linker.prev = &linker->hash_linker; ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3878 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3878(a)github.com>

4 weeks

[kamailio/kamailio] siptrace: handle trace_to_database param at runtime (PR #3877)

by Gustavo Almeida

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [x] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description This change allows to enable/disable the insertion of SIP traces into the DB at runtime (i know we could do this with `siptrace.status`, but this is a different case). This feature is strictly important if you start `Kamailio` with `trace_to_database` parameter disabled, and you want to enable it later and at runtime. Nowadays, if you try to start `Kamailio` with `trace_to_database` enabled, but without a connection to the DB, the service won't start (`child_init` logic). In this type of situation, it makes sense to start `Kamailio` disabling the `trace_to_database` parameter, and when the DB is ok, at runtime, we enable `trace_to_database` parameter. This prevents the need to restart the service, and also we can start `Kamailio` without problems, if DB of SIP Traces is NOK at that time. My PR may need some improvements, especially on the enable side, so feel free to make any changes to improve that. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3877 -- Commit Summary -- * siptrace: handle trace_to_database param at runtime -- File Changes -- M src/modules/siptrace/siptrace.c (100) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3877.patch https://github.com/kamailio/kamailio/pull/3877.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3877 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3877(a)github.com>

4 weeks

[kamailio/kamailio] Warnings emitted when calling functions from dialplan module (Issue #3851)

by Ben Kaufman

### Description Calling functions from the `dialplan` module in 5.8 (`dp_translate()`, `dp_match()`) results in the following line being logged: ``` WARNING: <core> [core/mem/q_malloc.c:520]: qm_free(): WARNING: free(0) called from dialplan: dp_db.c: pcre2_free(206) ``` Is this a functional problem, or just a case of overly aggressive logging? ### Troubleshooting #### Reproduction Reproducible with the following kamailio config: ``` #!KAMAILIO loadmodule "pv" loadmodule "db_sqlite" loadmodule "xlog" loadmodule "dialplan" disable_tcp = true force_rport = true !!define DBFILE /etc/kamailio/kamailio.sqlite modparamx("db_sqlite","db_set_readonly", "$def(DBFILE)") modparamx("dialplan","db_url", "sqlite:///$def(DBFILE)") modparam("dialplan", "attrs_pvar", "$avp(dp_attrs)") request_route { if ( $rm == "ACK" ) { exit; } xinfo("$ci New request\n"); dp_match("1", "$rU"); exit; } ``` The warning log is issued in 5.8 but not 5.7. Reproduced by sending a request with SIPp: ``` sipp -sn uac -m 1 -s 15554445555 localhost ``` ### Possible Solutions Not sure if this is just a case of logging being overly aggressive, or an issue with the module's memory management. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.1 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` Tested using docker `debian:12-slim` using the official packages from `http://deb.kamailio.org/kamailio58` * **Operating System**: Docker debian:12-slim, but also observed in Alpine Linux/ -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3851 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3851(a)github.com>

4 weeks

git:master:fabd1eb4: modules: readme files regenerated - ims_icscf ... [skip ci]

by Kamailio Dev

Module: kamailio Branch: master Commit: fabd1eb423b62a5899857cf6c0974bb26fd8be30 URL: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2024-06-17T16:01:09+02:00 modules: readme files regenerated - ims_icscf ... [skip ci] --- Modified: src/modules/ims_icscf/README Modified: src/modules/ims_usrloc_pcscf/README --- Diff: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb… Patch: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb…

4 weeks

[kamailio/kamailio] ims_icscf: add missing documents for database params (PR #3874)

by H. Yavari

- Adding missing ims_icscf database parameters to admin documents. - Change the default value for ims_icscf db_url to Kamailio default db_url value.   #### Pre-Submission Checklist    - [ :white_check_mark: ] Commit message has the format required by CONTRIBUTING guide - [ :white_check_mark:] Commits are split per component (core, individual modules, libs, utils, ...) - [ :white_check_mark:] Each component has a single commit (if not, squash them into one commit) - [ :white_check_mark:] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ :white_check_mark:] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ :white_check_mark:] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  Only an improvement for users to know they need to set database params for ims_icscf module. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3874 -- Commit Summary -- * ims_icscf: add missing documents for database params -- File Changes -- M src/modules/ims_icscf/doc/ims_icscf_admin.xml (100) M src/modules/ims_icscf/ims_icscf_mod.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3874.patch https://github.com/kamailio/kamailio/pull/3874.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3874 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3874(a)github.com>

4 weeks

← Newer
1
...
7
8
9
10
11
12
13
...
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev June 2024