sr-dev June 2024

sr-dev@lists.kamailio.org

14 participants
228 discussions

git:master:8f98317e: db_mysql: switch warn to dbg for log messages for opt_ssl_mode
by Daniel-Constantin Mierla 19 Jun '24

19 Jun '24

Module: kamailio Branch: master Commit: 8f98317e92da61160a1c416e0da45938a205d358 URL: https://github.com/kamailio/kamailio/commit/8f98317e92da61160a1c416e0da4593… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2024-06-19T10:44:29+02:00 db_mysql: switch warn to dbg for log messages for opt_ssl_mode - GH #3884 --- Modified: src/modules/db_mysql/km_my_con.c --- Diff: https://github.com/kamailio/kamailio/commit/8f98317e92da61160a1c416e0da4593… Patch: https://github.com/kamailio/kamailio/commit/8f98317e92da61160a1c416e0da4593… --- diff --git a/src/modules/db_mysql/km_my_con.c b/src/modules/db_mysql/km_my_con.c index 561a0037223..50e3375a11d 100644 --- a/src/modules/db_mysql/km_my_con.c +++ b/src/modules/db_mysql/km_my_con.c @@ -143,7 +143,7 @@ struct my_con *db_mysql_new_connection(const struct db_id *id) #if MYSQL_VERSION_ID >= 100339 mysql_options(ptr->con, MYSQL_OPT_SSL_ENFORCE, (void *)&(int){1}); #else - LM_WARN("ssl mode not supported by %s\n", MARIADB_BASE_VERSION); + LM_DBG("ssl mode not supported by %s\n", MARIADB_BASE_VERSION); #endif break; case 5: /* SSL_MODE_VERIFY_IDENTITY */ @@ -151,7 +151,7 @@ struct my_con *db_mysql_new_connection(const struct db_id *id) (void *)&(int){1}); break; default: - LM_WARN("opt_ssl_mode = %d not supported by MariaDB Connector/C\n", + LM_DBG("opt_ssl_mode = %d not supported by MariaDB Connector/C\n", db_mysql_opt_ssl_mode); break; }

1 0

[kamailio/kamailio] Kamailio 5.6 (and 5.7) core dumps. (Issue #3725)
by Mattis Lind 19 Jun '24

19 Jun '24

### Description We have a quite basic scenario which sends a SIP MESSAGE and then receives SIP MESSAGE back. It also sets up two voice calls using SIP INVITE. It is only this specific scenario that is causing the core dump. Some time the core dump occur just a few seconds after the call/message scenario, but occasionally it takes up to 50 minutes. We have been using the uac module for sending SIP MESSAGE in several other scenarios without experiencing a crash. We always see the same lines in the log just prior to the core dump: CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49 We are using Kamailio 5.6 retrieved from the kamailio repository: http://deb.kamailio.org/kamailio56. We are running Kamailio in a Docker container which runs on "5.10.0-25-cloud-amd64 #1 SMP Debian 5.10.191-1 (2023-08-16) x86_64 GNU/Linux" We have also tried Kamailio 5.7 from the same repo which crashes in exactly the same way. ### Troubleshooting #### Reproduction We have troubles to consistently reproduce it and it only happen from time to time when running a specific scenario sending SIP MESSAGE using the uac module. It does not happen for every call of this call scenario. At one instance Kamailo crashed with just 15 seconds in-between during the call scenario. #### Debugging Data ``` # gdb /usr/sbin/kamailio /core GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git Copyright (C) 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <https://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/sbin/kamailio... (No debugging symbols found in /usr/sbin/kamailio) warning: Can't open file /dev/zero (deleted) during file-backed mapping note processing [New LWP 4777] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -DD -M 18 -m 192 -A serverId=17173 -A sendTraceLocal="sip:10'. Program terminated with signal SIGSEGV, Segmentation fault. #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt full #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 No locals. #1 0x00007f5425e34b78 in __vfprintf_internal (s=s@entry=0x55a06e969a60, format=format@entry=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=ap@entry=0x7ffd6bebfb50, mode_flags=mode_flags@entry=0) at vfprintf-internal.c:1647 len = <optimized out> step0_jumps = {0, 1717, 1621, 3413, 3317, 3997, 2677, 2837, 3613, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 4101} space = <optimized out> is_short = <optimized out> use_outdigits = 0 outc = <optimized out> step1_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 1773, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} group = 0 prec = -1 step2_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4309, 4445, 3517, 4437, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 533, 533, 0} string = 0x756d6f7266222c22 <error: Cannot access memory at address 0x756d6f7266222c22> left = 0 is_long_double = <optimized out> width = 0 signed_number = <optimized out> step3a_jumps = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 4213, 0, 0, 0, 4389, 2789, 4197, 3917, 3221, 0, 0, 0, 0, 1925, 0, 0, 0, 0, 0, 0} alt = <optimized out> showsign = 0 is_long = 0 is_char = <optimized out> pad = <optimized out> step3b_jumps = {0 <repeats 11 times>, 3517, 0, 0, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} step4_jumps = {0 <repeats 14 times>, 4389, 2789, 4197, 3917, 3221, 2997, 1141, 1365, 1997, 1925, 1885, 733, 3709, 0, 0, 0} args_value = <optimized out> is_negative = <optimized out> number = {longlong = <optimized out>, word = <optimized out>} base = <optimized out> the_arg = {pa_wchar = 4777 L'\x12a9', pa_int = 4777, pa_long_int = 4777, pa_long_long_int = 4777, pa_u_int = 4777, pa_u_long_int = 4777, pa_u_long_long_int = 4777, pa_double = 2.3601515901836347e-320, pa_long_double = 1.74131181638025811763e-4947, pa_float128 = 3.09319115455554459548860449034534676e-4962, pa_string = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_wstring = 0x12a9 <error: Cannot access memory at address 0x12a9>, pa_pointer = 0x12a9, pa_user = 0x12a9} spec = 115 's' _buffer = {__routine = 0x4, __arg = 0xd, __canceltype = 1855363680, __prev = 0xe0} _avail = <optimized out> thousands_sep = 0x0 grouping = 0xffffffffffffffff <error: Cannot access memory at address 0xffffffffffffffff> done = 238 f = 0x55a06e5580a7 "s:%lu. Exec from %s:%u.\n" lead_str_end = 0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n" end_of_spec = <optimized out> work_buffer = "h\r\000\000\000\000\000\000\000\000\000\000\060\000\000\000\000\000\000\000\375\177\000\000 \372\353k\375\177\000\000\237MSn\n\000\000\000\000\000\000\000\240U", '\000' <repeats 18 times>, "P\225Un\240U\000\000\000\000\000\000[\214A\323\f\000\000\000\000\000\000\000\377\377\377\377\377\377\377\377\206\002", '\000' <repeats 14 times>, "\004\000\000\000\000\000\000\000 \367\353k\375\177\000\000\301\225Un\240U\000\000\323\262\vn\240U\000\000\000\000\000\000\000\000\000\000s\374On\240U\000\000W\225Un\240U\000\000\350>\212\027T\177\000\000 \323\365$T\177\000\000\060\a\354k\375\177\000\00--Type <RET> for more, q to quit, c to continue without paging-- 0\220\371\227n\240U\000\000"... workend = 0x7ffd6bebf9f8 "" ap_save = {{gp_offset = 16, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc30, reg_save_area = 0x7ffd6bebfb70}} nspecs_done = 10 save_errno = 4 readonly_format = 0 do_longlong_number = <optimized out> __result = <optimized out> #2 0x00007f5425ec079f in __vsyslog_internal (pri=<optimized out>, fmt=0x55a06e558020 "%s: %.*s%s%s%sBUG: qm: fragm. %p (address %p) beginning overwritten (%lx)! Memory allocator was called from %s:%u. Fragment marked by %s:%lu. Exec from %s:%u.\n", ap=0x7ffd6bebfb50, mode_flags=0) at ../misc/syslog.c:233 now_tm = {tm_sec = 8, tm_min = 18, tm_hour = 12, tm_mday = 23, tm_mon = 0, tm_year = 124, tm_wday = 2, tm_yday = 22, tm_isdst = 0, tm_gmtoff = 0, tm_zone = 0x55a06e94c5e0 "UTC"} now = 1706012288 fd = <optimized out> f = 0x55a06e969a60 buf = 0x0 bufsize = 0 msgoff = 21 saved_errno = <optimized out> failbuf = "`\232\226n\240U\000\000\000\204\201\247[\214A\323`\374\353k\375\177\000\000\300p\371%T" clarg = {buf = <optimized out>, oldaction = <optimized out>} #3 0x00007f5425ec0c46 in __syslog (pri=<optimized out>, fmt=<optimized out>) at ../misc/syslog.c:117 ap = {{gp_offset = 48, fp_offset = 48, overflow_arg_area = 0x7ffd6bebfc70, reg_save_area = 0x7ffd6bebfb70}} #4 0x000055a06e3b7839 in ?? () No symbol table info available. #5 0x000055a06e3bc039 in qm_free () No symbol table info available. #6 0x000055a06e3c7c28 in qm_shm_free () No symbol table info available. #7 0x00007f542325fb8e in uac_send_tm_callback () from /usr/lib/x86_64-linux-gnu/kamailio/modules/uac.so No symbol table info available. #8 0x00007f5424a2f002 in run_trans_callbacks_internal () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #9 0x00007f5424a2f179 in run_trans_callbacks () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #10 0x00007f54249d5e8c in free_cell_helper () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #11 0x00007f5424aa8f82 in wait_handler () from /usr/lib/x86_64-linux-gnu/kamailio/modules/tm.so No symbol table info available. #12 0x000055a06e37a263 in ?? () No symbol table info available. #13 0x000055a06e37a79d in ?? () No symbol table info available. #14 0x000055a06e37acc6 in timer_main () No symbol table info available. #15 0x000055a06e0a5f62 in main_loop () No symbol table info available. --Type <RET> for more, q to quit, c to continue without paging-- #16 0x000055a06e0b120c in main () No symbol table info available. (gdb) info locals No locals. (gdb) list 72 in ../sysdeps/x86_64/multiarch/strlen-evex.S ``` #### Log Messages ``` Log file: 2024-01-23T13:18:08.828+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id un0rihsRLJLvP-grn6LO-A 2024-01-23T13:18:08.835+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4789]: INFO: <script>: Incoming SIP TCP request conid 21 call-id WQjhldpRJbxjZRYe7fWgbw 2024-01-23T13:18:08.860+01:00 Jan 23 12:18:08 /usr/sbin/kamailio[4795]: CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 49 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:783]: handle_sigs(): child process 4777 exited by a signal 11 2024-01-23T13:18:09.486+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: ALERT: <core> [main.c:787]: handle_sigs(): core was generated 2024-01-23T13:18:09.516+01:00 Jan 23 12:18:09 /usr/sbin/kamailio[4751]: INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 2024-01-23T13:18:09.570+01:00 Started /root/sipconfig/startkamailio.sh 2024-01-23T13:18:09.570+01:00 info: :-) Starting Kamailio ``` #### SIP Traffic ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # /usr/sbin/kamailio -v version: kamailio 5.6.5 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: ``` # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye Linux ip-nn-nn-nn-nn 5.10.0-25-cloud-amd64 #1 SMP Debian 5.10.191-1 (2023-08-16) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3725 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3725(a)github.com>

4 8

git:5.8:be76a514: tls: remove confusing error message when trying to print socket for <default> server
by Victor Seva 18 Jun '24

18 Jun '24

Module: kamailio Branch: 5.8 Commit: be76a51422df3294c533accae1b6a621ee9d3a7d URL: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… Author: Victor Seva <linuxmaniac(a)torreviejawireless.org> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2024-06-18T18:56:53+02:00 tls: remove confusing error message when trying to print socket for <default> server > CRITICAL: <core> [core/ip_addr.c:232]: ip_addr2sbuf(): unknown address family 0 > NOTICE: tls [tls_domain.c:1176]: ksr_tls_fix_domain(): registered server_name callback handler for socket [:0], server_name='<default>' ... (cherry picked from commit 87c8290ab934fd27f8baebabaf66d1fb4168ba72) --- Modified: src/modules/tls/tls_domain.c --- Diff: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… Patch: https://github.com/kamailio/kamailio/commit/be76a51422df3294c533accae1b6a62… --- diff --git a/src/modules/tls/tls_domain.c b/src/modules/tls/tls_domain.c index e056a70b504..810a7e9589a 100644 --- a/src/modules/tls/tls_domain.c +++ b/src/modules/tls/tls_domain.c @@ -1155,14 +1155,14 @@ static int ksr_tls_fix_domain(tls_domain_t *d, tls_domain_t *def) d->ctx[i], tls_server_name_cb)) { LM_ERR("register server_name callback handler for socket " "[%s:%d], server_name='%s' failed for proc %d\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>", i); return -1; } if(!SSL_CTX_set_tlsext_servername_arg(d->ctx[i], d)) { LM_ERR("register server_name callback handler data for socket " "[%s:%d], server_name='%s' failed for proc %d\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>", i); return -1; } @@ -1175,7 +1175,7 @@ static int ksr_tls_fix_domain(tls_domain_t *d, tls_domain_t *def) && (d->server_name.len > 0 || (d->type & TLS_DOMAIN_DEF))) { LM_NOTICE("registered server_name callback handler for socket " "[%s:%d], server_name='%s' ...\n", - ip_addr2a(&d->ip), d->port, + (d->ip.af > 0) ? ip_addr2a(&d->ip) : "0.0.0.0", d->port, (d->server_name.s) ? d->server_name.s : "<default>"); } #endif

1 0

[kamailio/kamailio] github: [skip ci]: bump docker/build-push-action from 5 to 6 (PR #3880)
by dependabot[bot] 18 Jun '24

18 Jun '24

Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 5 to 6. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/docker/build-push-action/releases">do… releases</a>.</em></p> <blockquote> <h2>v6.0.0</h2> <ul> <li>Export build record and generate <a href="https://docs.docker.com/build/ci/github-actions/build-summary/&q… summary</a> by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1120&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.24.0 to 0.26.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1132&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1136&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1138&q… <li>Bump braces from 3.0.2 to 3.0.3 in <a href="https://redirect.github.com/docker/build-push-action/pull/1137&q… </ul> <blockquote> <p>[!NOTE] This major release adds support for generating <a href="https://docs.docker.com/build/ci/github-actions/build-summary/&q… summary</a> and exporting build record for your build. You can disable this feature by setting <a href="https://docs.docker.com/build/ci/github-actions/build-summary/#d… <code>DOCKER_BUILD_NO_SUMMARY: true</code> environment variable in your workflow</a>.</p> </blockquote> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.4.0...v6.… <h2>v5.4.0</h2> <ul> <li>Show builder information before building by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1128&q… <li>Handle attestations correctly with provenance and sbom inputs by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1086&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.19.0 to 0.24.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1088&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1105&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1121&q… <a href="https://redirect.github.com/docker/build-push-action/pull/1127&q… <li>Bump undici from 5.28.3 to 5.28.4 in <a href="https://redirect.github.com/docker/build-push-action/pull/1090&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.3.0...v5.… <h2>v5.3.0</h2> <ul> <li>Bump <code>@docker/actions-toolkit</code> from 0.18.0 to 0.19.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1080&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.2.0...v5.… <h2>v5.2.0</h2> <ul> <li>Disable quotes detection for <code>outputs</code> input by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/1074&q… <li>Warn about ignored inputs by <a href="https://github.com/favonia"><code>@favonia</co… in <a href="https://redirect.github.com/docker/build-push-action/pull/1019&q… <li>Bump <code>@docker/actions-toolkit</code> from 0.14.0 to 0.18.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/1070&q… <li>Bump undici from 5.26.3 to 5.28.3 in <a href="https://redirect.github.com/docker/build-push-action/pull/1057&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.1.0...v5.… <h2>v5.1.0</h2> <ul> <li>Add <code>annotations</code> input by <a href="https://github.com/crazy-max"><code>@crazy-max&lt… in <a href="https://redirect.github.com/docker/build-push-action/pull/992&qu… <li>Add <code>secret-envs</code> input by <a href="https://github.com/elias-lundgren"><code>@elias-l… in <a href="https://redirect.github.com/docker/build-push-action/pull/980&qu… <li>Bump <code>@babel/traverse</code> from 7.17.3 to 7.23.2 in <a href="https://redirect.github.com/docker/build-push-action/pull/991&qu… <li>Bump <code>@docker/actions-toolkit</code> from 0.13.0-rc.1 to 0.14.0 in <a href="https://redirect.github.com/docker/build-push-action/pull/990&qu… <a href="https://redirect.github.com/docker/build-push-action/pull/1006&q… </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/docker/build-push-action/compare/v5.0.0...v5.… </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/docker/build-push-action/commit/c382f710d39a5… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1120… from crazy-max/build-summary</li> <li><a href="https://github.com/docker/build-push-action/commit/5a5b70d974381… chore: update generated content</li> <li><a href="https://github.com/docker/build-push-action/commit/dc24cf9e252ee… don't generate summary for cloud driver</li> <li><a href="https://github.com/docker/build-push-action/commit/667cb22c52a87… DOCKER_BUILD_NO_SUMMARY env to disable summary</li> <li><a href="https://github.com/docker/build-push-action/commit/d880b1964b626… generate build summary</li> <li><a href="https://github.com/docker/build-push-action/commit/e51051ad0baf1… export build record and upload artifact</li> <li><a href="https://github.com/docker/build-push-action/commit/86c2bd0031842… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1137… from docker/dependabot/npm_and_yarn/braces-3.0.3</li> <li><a href="https://github.com/docker/build-push-action/commit/268d2b1611793… Merge pull request <a href="https://redirect.github.com/docker/build-push-action/issues/1138… from docker/dependabot/npm_and_yarn/docker/actions-t...</li> <li><a href="https://github.com/docker/build-push-action/commit/2b8dc7f52914d… chore: update generated content</li> <li><a href="https://github.com/docker/build-push-action/commit/840c12be1707e… chore(deps): Bump <code>@docker/actions-toolkit</code> from 0.25.1 to 0.26.0</li> <li>Additional commits viewable in <a href="https://github.com/docker/build-push-action/compare/v5...v6&quot… view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?d… Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3880 -- Commit Summary -- * github: [skip ci]: bump docker/build-push-action from 5 to 6 -- File Changes -- M .github/workflows/alpine.yml (6) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3880.patch https://github.com/kamailio/kamailio/pull/3880.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3880 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3880(a)github.com>

2 1

git:master:bc8ff957: github: [skip ci]: bump docker/build-push-action from 5 to 6
by Victor Seva 18 Jun '24

18 Jun '24

Module: kamailio Branch: master Commit: bc8ff9572eb2930a08dbfe16c94c7f878a05be72 URL: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… Author: dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com> Committer: Victor Seva <linuxmaniac(a)torreviejawireless.org> Date: 2024-06-18T08:39:58+02:00 github: [skip ci]: bump docker/build-push-action from 5 to 6 Bumps [docker/build-push-action](https://github.com/docker/build-push-action) from 5 to 6. - [Release notes](https://github.com/docker/build-push-action/releases) - [Commits](https://github.com/docker/build-push-action/compare/v5...v6) --- updated-dependencies: - dependency-name: docker/build-push-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support(a)github.com> --- Modified: .github/workflows/alpine.yml --- Diff: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… Patch: https://github.com/kamailio/kamailio/commit/bc8ff9572eb2930a08dbfe16c94c7f8… --- diff --git a/.github/workflows/alpine.yml b/.github/workflows/alpine.yml index 3bf126e588d..5b888aadd36 100644 --- a/.github/workflows/alpine.yml +++ b/.github/workflows/alpine.yml @@ -139,7 +139,7 @@ jobs: - name: Build and push "-debug" build if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile.debug @@ -158,7 +158,7 @@ jobs: - name: Build and push "-alpine" build if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile.alpine @@ -168,7 +168,7 @@ jobs: - name: Build and push if: ${{ steps.should_run.outputs.should_run != 'false' }} - uses: docker/build-push-action@v5 + uses: docker/build-push-action@v6 with: context: pkg/docker/alpine file: pkg/docker/alpine/Dockerfile

1 0

git:master:fabd1eb4: modules: readme files regenerated - ims_icscf ... [skip ci]
by Kamailio Dev 17 Jun '24

17 Jun '24

Module: kamailio Branch: master Commit: fabd1eb423b62a5899857cf6c0974bb26fd8be30 URL: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2024-06-17T16:01:09+02:00 modules: readme files regenerated - ims_icscf ... [skip ci] --- Modified: src/modules/ims_icscf/README Modified: src/modules/ims_usrloc_pcscf/README --- Diff: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb… Patch: https://github.com/kamailio/kamailio/commit/fabd1eb423b62a5899857cf6c0974bb…

1 0

[kamailio/kamailio] ims_icscf: add missing documents for database params (PR #3874)
by H. Yavari 17 Jun '24

17 Jun '24

- Adding missing ims_icscf database parameters to admin documents. - Change the default value for ims_icscf db_url to Kamailio default db_url value.   #### Pre-Submission Checklist    - [ :white_check_mark: ] Commit message has the format required by CONTRIBUTING guide - [ :white_check_mark:] Commits are split per component (core, individual modules, libs, utils, ...) - [ :white_check_mark:] Each component has a single commit (if not, squash them into one commit) - [ :white_check_mark:] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ :white_check_mark:] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ :white_check_mark:] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  Only an improvement for users to know they need to set database params for ims_icscf module. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3874 -- Commit Summary -- * ims_icscf: add missing documents for database params -- File Changes -- M src/modules/ims_icscf/doc/ims_icscf_admin.xml (100) M src/modules/ims_icscf/ims_icscf_mod.c (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3874.patch https://github.com/kamailio/kamailio/pull/3874.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3874 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3874(a)github.com>

3 6

git:master:04e065af: ims_usrloc_pcscf: Update the module document
by Daniel-Constantin Mierla 17 Jun '24

17 Jun '24

Module: kamailio Branch: master Commit: 04e065af3d46e4b0def5ed3de6502442466f04bc URL: https://github.com/kamailio/kamailio/commit/04e065af3d46e4b0def5ed3de650244… Author: H.Yavari <hyavari(a)senasoftware.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2024-06-17T15:52:08+02:00 ims_usrloc_pcscf: Update the module document - Fixing the db_url param value from int to string in admin document. --- Modified: src/modules/ims_usrloc_pcscf/doc/ims_usrloc_pcscf_admin.xml --- Diff: https://github.com/kamailio/kamailio/commit/04e065af3d46e4b0def5ed3de650244… Patch: https://github.com/kamailio/kamailio/commit/04e065af3d46e4b0def5ed3de650244…

1 0

git:master:57087e42: ims_icscf: add missing documents for database params
by Daniel-Constantin Mierla 17 Jun '24

17 Jun '24

Module: kamailio Branch: master Commit: 57087e42f1b1cae86132c558aa9497f4839af7e0 URL: https://github.com/kamailio/kamailio/commit/57087e42f1b1cae86132c558aa9497f… Author: H.Yavari <hyavari(a)senasoftware.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2024-06-17T15:52:08+02:00 ims_icscf: add missing documents for database params - Adding missing ims_icscf database parameters to admin documents. - Change the default value for ims_icscf db_url to Kamailio default db_url value. --- Modified: src/modules/ims_icscf/doc/ims_icscf_admin.xml Modified: src/modules/ims_icscf/ims_icscf_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/57087e42f1b1cae86132c558aa9497f… Patch: https://github.com/kamailio/kamailio/commit/57087e42f1b1cae86132c558aa9497f… --- diff --git a/src/modules/ims_icscf/doc/ims_icscf_admin.xml b/src/modules/ims_icscf/doc/ims_icscf_admin.xml index 9ae046e6794..e3c552a1c57 100644 --- a/src/modules/ims_icscf/doc/ims_icscf_admin.xml +++ b/src/modules/ims_icscf/doc/ims_icscf_admin.xml @@ -111,6 +111,106 @@ modparam("ims_icscf","scscf_entry_expiry", 300) </example> </section> + <section> + <title><varname>db_url</varname> (string)</title> + + <para> + &url; of the database to be used. + </para> + + <para> + If the db_url string is empty, the default database URL + will be used. + </para> + + <para> + <emphasis> + Default value is <quote>&defaultrodb;</quote>. + </emphasis> + </para> + + <example> + <title>Set <varname>db_url</varname> parameter</title> + <programlisting format="linespecific"> +... +modparam("ims_icscf", "db_url", "&exampledb;") +... + </programlisting> + </example> + </section> + + <section> + <title> + <varname>db_nds_table</varname> (string)</title> + + <para> + NDS (Network Domain Security) table name in database to be used. + </para> + + <para> + <emphasis> + Default value is <quote>nds_trusted_domains</quote>. + </emphasis> + </para> + + <example> + <title>Set <varname>db_nds_table</varname> parameter</title> + <programlisting format="linespecific"> +... +modparam("ims_icscf", "db_nds_table", "nds_trusted_domains") +... + </programlisting> + </example> + </section> + + <section> + <title> + <varname>db_scscf_table</varname> (string)</title> + + <para> + S-CSCF table name in database to be used. + </para> + + <para> + <emphasis> + Default value is <quote>s_cscf</quote>. + </emphasis> + </para> + + <example> + <title>Set <varname>db_scscf_table</varname> parameter</title> + <programlisting format="linespecific"> +... +modparam("ims_icscf", "db_scscf_table", "s_cscf") +... + </programlisting> + </example> + </section> + + <section> + <title> + <varname>db_capabilities_table</varname> (string)</title> + + <para> + S-CSCF capabilities table name in database to be used. + </para> + + <para> + <emphasis> + Default value is <quote>s_cscf_capabilities</quote>. + </emphasis> + </para> + + <example> + <title>Set <varname>db_capabilities_table</varname> parameter</title> + <programlisting format="linespecific"> +... +modparam("ims_icscf", "db_capabilities_table", "s_cscf_capabilities") +... + </programlisting> + </example> + </section> + <section> <title><varname>cxdx_forced_peer</varname> (string)</title> diff --git a/src/modules/ims_icscf/ims_icscf_mod.c b/src/modules/ims_icscf/ims_icscf_mod.c index 502fcf68174..a690891ee46 100644 --- a/src/modules/ims_icscf/ims_icscf_mod.c +++ b/src/modules/ims_icscf/ims_icscf_mod.c @@ -71,7 +71,7 @@ stat_var *uar_replies_response_time = NULL; stat_var *lir_replies_response_time = NULL; //module parameters -char *ims_icscf_db_url = "mysql://icscf:heslo@localhost/hssdata"; /**< DB URL */ +char *ims_icscf_db_url = DEFAULT_RODB_URL; /**< DB URL */ char *ims_icscf_db_nds_table = "nds_trusted_domains"; /**< NDS table in DB */ char *ims_icscf_db_scscf_table = "s_cscf"; /**< S-CSCF table in db */ char *ims_icscf_db_capabilities_table =

1 0

[kamailio/kamailio] tls: enable statistics (PR #3852)
by Cedric Müller 17 Jun '24

17 Jun '24

#### Pre-Submission Checklist - [x] Commit message has the format required by CONTRIBUTING guide - [x] Commits are split per component (core, individual modules, libs, utils, ...) - [x] Each component has a single commit (if not, squash them into one commit) - [x] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [x] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [x] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  This enables tls module statistics. This is needed for the xhttp_prom module to export tls module statistics. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/3852 -- Commit Summary -- * tls: enable statistics * tls: code formatting -- File Changes -- M src/modules/tls/tls_mod.c (43) -- Patch Links -- https://github.com/kamailio/kamailio/pull/3852.patch https://github.com/kamailio/kamailio/pull/3852.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/3852 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/3852(a)github.com>

4 7

← Newer
1
...
9
10
11
12
13
14
15
...
23
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev June 2024