sr-users December 2003

sr-users@lists.kamailio.org

108 participants
257 discussions

[Serusers] NatHelper & Portaone RTP Proxy
by Darren Sessions 02 Dec '03

02 Dec '03

Someone correct me if I'm wrong, but is the typical setup for Nathelper and Portaone RTP proxy work on seperate servers with dual network cards? then talking to another SER box doing registrations and call routing? and the Portaone RTP taking the voice packets? Thanks, - Darren

2 1

Re: [Serusers] nathelper question
by jaime.gil＠orange.co.uk 02 Dec '03

02 Dec '03

Wangji, You need a packet sniffer, like www.ethereal.com, and probably follow more carefully the sample script: http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg?… Good luck! Jaime From: jimmy way <jimway71(a)yahoo.com> on 01/12/2003 10:04 To: Jaime GIL/EN/HTLUK@HTLUK cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] nathelper question Jaime, I have do it, buf still fail. By the way, I really want to see the SIP packets SER sended, recieved and the packets after changed. maybe can see what wrong with it. But I can't do it. Wangji --- jaime.gil(a)orange.co.uk wrote: > > Wangji, > > Not sure, but normally you need to force_rport and > fix_nated_contact at > registration, before you save to DB. > > Jaime > > > > ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************

2 1

[Serusers] ser 0.8.12 & freeradius
by Rudakov Evgeniy 02 Dec '03

02 Dec '03

HI, My problem is unknown authenfication with radius digest authorization work properly with x-lite but doesnt work with kerio softphone and dlink hardware gateway in debug messages i have where is problem ? 7(18572) SIP Request: 7(18572) method: <REGISTER> 7(18572) uri: <sip:195.138.96.157> 7(18572) version: <SIP/2.0> 7(18572) parse_headers: flags=1 7(18572) end of header reached, state=5 7(18572) parse_headers: Via found, flags=1 7(18572) parse_headers: this is the first via 7(18572) After parse_msg... 7(18572) preparing to run routing scripts... 7(18572) DEBUG : is_maxfwd_present: searching for max_forwards header 7(18572) parse_headers: flags=128 7(18572) DEBUG: is_maxfwd_present: value = 70 7(18572) parse_headers: flags=8 7(18572) DEBUG: add_param: tag=62db317e3f8f6cd7 7(18572) end of header reached, state=29 7(18572) parse_headers: flags=256 7(18572) end of header reached, state=9 7(18572) DEBUG: get_hdr_field: <To> [36]; uri=[sip:1002@evgeniy.riscom.net] 7(18572) DEBUG: to body [1002 <sip:1002@evgeniy.riscom.net>] 7(18572) get_hdr_field: cseq <CSeq>: <276> <REGISTER> 7(18572) DEBUG: get_hdr_body : content_length=0 7(18572) found end of header 7(18572) find_first_route(): No Route headers found 7(18572) loose_route(): There is no Route HF 7(18572) receive_msg: cleaning up

3 8

[Serusers] help for log
by hong cheng 02 Dec '03

02 Dec '03

hi, I have set the debug=9 in ser.cfg and build with mode=debug, but i still can not get much info from /var/log/messages. Can anybody give a hint ? Many thanks, hong -------------------------- debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #debug=7 #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" -------------------------------- Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15806]: INFO: fifo process starting: 15806 Dec 2 18:32:09 localhost ./ser[15806]: SER: open_uac_fifo: fifo server up at /t mp/ser_fifo...

3 2

RE: [Serusers] SIP URL with IP Address Problem
by dhiraj.2.bhuyan＠bt.com 02 Dec '03

02 Dec '03

Sorry I attached the wrong config file in my previous email. Correct one attached - Regards, Dhiraj -----Original Message----- From: dhiraj.2.bhuyan(a)bt.com [mailto:dhiraj.2.bhuyan@bt.com] Sent: 02 December 2003 10:48 To: serusers(a)lists.iptel.org Subject: [Serusers] SIP URL with IP Address Problem Hello everyone, I am facing the following problem - eniac.alien.bt.co.uk = 132.146.196.91 A Grandstream BudgeTone 100 phone is registered to the SER registrar and proxy running on eniac.alien.bt.co.uk as dhiraj(a)eniac.alien.bt.co.uk When I try serctl ping sip:dhiraj@eniac.alien.bt.co.uk I get back a "200 OK" But when I do serctl ping sip:dhiraj@132.146.196.91 I get back a "404". How to overcome this? I am using SER from the CVS. My ser.cfg is attached. Thanks, Dhiraj Bhuyan Network Security Specialist, BT Exact Tel: +44 1473 643932 Mob: +44 7962 012145 Email: dhiraj.2.bhuyan(a)bt.com

2 1

[Serusers] Grandstream
by Scott Holben 02 Dec '03

02 Dec '03

FYI, The Grandstream phones work great with SER provided the numeric aliases can be used to reach endpoints. The Grandstream can only dial numeric numbers and not generic sip URI/URLs. It would be great if there was a lookup available underneath the http://www.iptel.org/user/index.php (MyAccount link)->(phone book tab)->(find user link) to find numeric aliases to reach iptel.org users, provided you got the correct non numeric SIP URIs of iptel.org users. Also, the peering prefix for an iptel.org user to reach and fwd.pulver.com user apears to be in error at http://www.fwd.pulver.com/index.php?section_id=78&PHPSESSID=06a451f4079f56c…, a prefix of 21111 works great and **393 does not work. Bye, Scott Holben sip iptel.org URIs: skaht AT iptel.org or 90931 AT iptel.org

3 3

[Serusers] IP Centrex features
by Olle E. Johansson 02 Dec '03

02 Dec '03

Just found an IETF draft on how to implement PBX features in SIP http://www.voip-info.org/tiki-index.php?page=SIP+PBX+functions Maybe we can try to implement these in SER and document these functions on the Wiki? There's some of these in the source examples and in the howto's, but it might be good to document functions one by one. # Call Hold # Music on Hold # Unattended Transfer # Consultation Hold # Unconditional Call Forwarding # Attended Transfer # No Answer Call Forwarding # Busy Call Forwarding # Single-Line Extension # 3-way Call # Incoming Call Screening # Find-Me # Call Pickup # Call Park # Outgoing Call Screening # Automatic Redial Anyway, it's good reading material! /Olle

3 2

[Serusers] Cisco 7960 / call pick-up
by Geert Nijpels 01 Dec '03

01 Dec '03

Hello, After having worked with ser for a few days, I have SER running with authentication, accounting , voicemail and conferencing, which is working great (Thanks for this great product). However, I have a problem connecting Cisco 7960 phones. Ser server: colo.foo.bar. Domain/authentication realm/alias: foo.net. In my grandstream phones I can configure a different domain then the sip proxy. In the cisco phones, I can only configure the sip proxy. The cisco's are registering with the username(a)colo.foo.bar and not with username(a)foo.net. The phones will not authenticate, because there only exists a username(a)foo.net in the database. What is the best to solve this problem. I can think of the following: - match the uri and do: rewritehost("foo.net") - make a srv entry for foo.net pointing to colo.foo.bar and set the proxy in the cisco phone to foo.net - configure multidomain support and put in both domains. I'm not sure what the best solution is, does anyone have experience with this issue? Furthermore, I have a question of which I could not find an answer for in the archives or google. Is it possible to do call pick-up with ser? My first thought would be no (and use a timeout with forwarding), because Ser is not call statefull (and has no b2bua). But maybe I'm wrong. Kind regards and thanks for reading, Geert Nijpels

2 1

[Serusers] Permission denied
by Claus Thrane 01 Dec '03

01 Dec '03

Hello I have tryed installing SER on two Debian(I386) servers, on both mashines i get the following error in the syslog, while running "serctl moni" Nov 30 13:38:45 *host* /usr/sbin/ser[24949]: ERROR: open_reply_pipe: open error (/tmp/ser_receiver_25028): Permission denied Nov 30 13:38:45 *host* /usr/sbin/ser[24949]: ERROR: fifo_reply: no reply pipe /tmp/ser_receiver_25028 what am I missing. thanks for now Thrane

2 1

Re: [Serusers] Re: Residential Gateways
by Tor Setane 01 Dec '03

01 Dec '03

Have you tried to use DO= ip-address of ser-server instead of ati.com? I use authentication so I add AUTH-USERNAME=38140299 and AUTH-PASSWD=xxxxxxxx to the "create sip" command. Here is one of my configs: S SWITCH AGET=NORMAL S SWITCH PORT=WAN IFLT=ON S SWITCH PORT=LAN1 IFLT=ON S SWITCH PORT=LAN2 IFLT=ON S SWITCH PORT=LAN3 IFLT=ON A VLAN=1 PORT=WAN FRAME=TAGGED C VLAN=iptnett VID=5 A VLAN=5 PORT=VOIP A VLAN=5 PORT=WAN FRAME=TAGGED C VLAN=tvnett VID=10 A VLAN=10 PORT=LAN1,LAN3 A VLAN=10 PORT=WAN FRAME=TAGGED SET IP INTERFACE=eth0 CONFIGURATION=DHCP ENABLE TELNET ENABLE NTP SET NTP UTCOFFSET=1 ADD NTP SERVER=10.100.10.31 DEFAULT SET PASSWORD=CIEEHOBB@HHILCHBNADNHA@NGL@B@HIF ENABLE SIP CREATE SIP PORT=0 PHNO=38140299 AUTH-USERNAME=38140299 AUTH-PASSWD=xxxxxxxx DO=ipt-server1.ivisjon.no LS=ipt-server1.ivisjon.no PS=ipt-server1.ivisjon.no CAP=PCMU;PCMA TOS=5 SET PHONE PORT=0 DCALL=VOIP VAD=OFF I have "ipt-server1.ivisjon.no" in my dns. Tor. andyv(a)sympatico.ca wrote: > The RG's are 213 > > Here are the *.cfg files > > #1 > SET IP INTERFACE=eth0 IPADDRESS=192.168.20.3 MASK=255.255.255.0 > GATEWAY=192.168.20.1 > SET LOADER SERVER=192.168.20.10 > ENABLE SIP > CREATE SIP PORT=0 > PHNO=1001 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 CAP=PCMU;PCMA;G723 TOS=0 > SET > PHONE PORT=0 DCALL=VOIP > > #2 > SET IP INTERFACE=eth0 IPADDRESS=192.168.20.2 MASK=255.255.255.0 > GATEWAY=192.168.20.1 > SET LOADER SERVER=192.168.20.4 > SET DOMAIN=ati.com > ENABLE > SIP > CREATE SIP PORT=0 PHNO=1000 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 > CAP=PCMU;PCMA;G723 TOS=0 > ENABLE TELNET > SET PHONE PORT=0 DCALL=VOIP > SET > PHONE PORT=1 DCALL=VOIP > > > >>From: Tor Setane <tor.setane(a)ella.no> >>Date: Mon, 01 Dec 2003 13:19:00 +0100 >>To: serusers(a)lists.iptel.org >>Subject: [Serusers] Re: Residential Gateways >> >>What kind of gateways are you using? 213 or 613? >>I'm using both without any problems. Please post your rg config.. >> >>Tor. >> >> >>>Date: Sun, 30 Nov 2003 19:59:37 -0500 >>>From: "Andy Vander Woude" <andyv(a)sympatico.ca> >>>Subject: [Serusers] Residential Gateways >>>To: <serusers(a)lists.iptel.org> >>>Message-ID: <000001c3b7a6$68560d70$8adaacce@generator> >>>Content-Type: text/plain; charset="us-ascii" >>> >>> >>>Running Redhat V9 and have installed the SIP Express Router (ser) >>>packages. Have two Allied Telesyn Residential Gateways (192.168.20.2 and >>>192.168.20.3) and laptop (192.168.20.4) running ser connecting to a >>>managed switch IP address (192.168.20.1 (gateway)) >>>The RG's are configured to access the Proxy server, & Domain server at >>>192.168.20.4 and the Gateway as 192.168.20.1 The Domain is called >>>ati.com. >>> >>>When connected all together I get a dial tone on the phones, however >>>when I dial the # configured on the RG's I do not get a ring and they do >>>not register with the ser server. When I type in the "ser start" command >>>I see the alias entries as "127.0.0.1 localhost localdomain localhost" >>>and "192.168.20.4 localhost.ati.com localhost" >>> >>>The entries in the ser.cfg relating to the localdomain have been changed >>>to ati.com >>>I have added the 192.168.20.4 to the hosts.cfg relating to the ati.com >>>domain. >>> >>>Any idea as to why this configuration is not working. This is a lab >>>situation with no outside connections. >>>Thank you. >>> >>> >> >> >>--- >>[This E-mail was scanned for viruses by Declude Virus] >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> > > > --- > [This E-mail was scanned for viruses by Declude Virus] > > > --- [This E-mail was scanned for viruses by Declude Virus]

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2003