sr-users May 2003

sr-users@lists.kamailio.org

52 participants
100 discussions

[Serusers] more info about pa nad nathelper?
by Yang Xiang 22 May '03

22 May '03

Hello, could you give me a bit of further information about the module pa and nathelper? What can they do and what can't they do? and how do they work? And the corresponding rfcs or drafts? Thanks yang

2 1

[Serusers] SERWEB access
by Rami Francis 22 May '03

22 May '03

Hello All, I am sorry I am little bit confused. Does any one know how to log to the serweb from the browser, and what file should the appache be pointing to, also in the config.php, which line exaclty should I change to resemble my local configuration. Thank you all regards Rami Francis

1 0

[Serusers] Jabber registration
by magnus melin 22 May '03

22 May '03

Hallo We have set up an environment including a Jabber server and one SER server. It looks to me like the ser is using the From header field when looking up the jab_id, jabb_passwd from the sip_jab db this seems to be a problem when making a third-party registration. Is it posible to change this to use the To header instead. Regards Magnus

2 1

[Serusers] Matching of src_ip, what am I doing wrong?
by Jamin W. Collins 22 May '03

22 May '03

I'm at a bit of a loss, I've got a number of SER proxies in use and all are working quite well with one exception. I've configured the proxies to sit between SIP handsets and a SIP capable PBX. All phones register with the proxy at their location and the PBX makes all requests for phones to the proxy. This normally works well. However, for the phones to be able to place outbound calls, I configured the SER proxy to pass all location lookup failures on to the PBX. The PBX then (seeing the request from a registered location) will place the call out. All of this works fine. The problem comes when one of the phones is not registered properly with the SER proxy and the PBX requests it. The request fails the location lookup and is sent back to the PBX. To correct this I've tried matching the "src_ip" to see if the request is from the PBX however this doesn't appear to work. I have the following condition in the ser.cfg, shouldn't this stop requests from 1.2.3.4 being sent back to 1.2.3.4? if (!lookup("location")) { log(1, "Location lookup failure."); if (src_ip=="1.2.3.4") || (src_ip=="1.2.3.6") { log(1, "Request from first server."); sl_reply_error(); } else { rewritehost("1.2.3.4"); log (1, "Sending request to the first server."); t_on_negative("1"); t_relay(); }; break; }; -- Jamin W. Collins This is the typical unix way of doing things: you string together lots of very specific tools to accomplish larger tasks. -- Vineet Kumar

3 2

Re: [Serusers] radius
by Yang Xiang 22 May '03

22 May '03

It is very probable that you did not get the libradiusclient linked to auth.so. If you compile this module in the module directory e.g. sip_router/modules/radius_auth the gcc option "-lradiusclient" will be missing. So you have to modify the makefile yourself or you should just compile the module from the main directory e.g. sip_router with "make modules=modules/radius_auth install". I use CVS 0.8.11 pre 24 and radius works fine. Best regards yang > From: "Kelvin Chua" <kchua(a)up.edu.ph> > hi guys, > > i'm trying to enable authentication through radius/ldap.=20 > i'm still using 0.8.10 and having errors on this: > > May 21 14:54:34 voip ser: ERROR: load_module: could not open module = > </usr/local/lib/ser/modules/auth.so>: = > /usr/local/lib/ser/modules/auth.so: undefined symbol: rc_avpair_add=20 > > i confirmed radiusclient to be functioning by using radlogin and = > authentication works. i can't find the source code containing the = > function, hope somebody could help me out on this.... thanks > > by the way, when's 0.8.11 coming out?

1 0

[Serusers] Fifo Error - Please help?!?!
by Todd 21 May '03

21 May '03

Hi, I'm new to Sip and Ser and am having trouble getting the fifo to work correctly. This is the error I see: Warning: fopen(/var/tmp/ser1_fifo) [function.fopen]: failed to create stream: Permission denied in /usr/local/apache/htdocs/serweb/functions.php on line 172 I have tried with ser_fifo in the /tmp directory as specified in the the installation guide with the same errors. I have tried changing the owner / group permissions as well as who owns the file to no avail. The error comes up when the file is accessible by root, if I change it to apache or any other user the system will not load at all...help?!?!? Thanks in advance for any help. Todd

2 1

[Serusers] SERWEB via Browser
by Rami Francis 21 May '03

21 May '03

Hello All, Does any one know how to log to the serweb from the browser, and what file should the appache be pointing to, also in the config.php, which line exaclty should I change to resemble my local configuration. Thank you all regards Rami Francis

1 0

[Serusers] SERWEB document
by Rami Francis 21 May '03

21 May '03

Hi everybody, I am quite lost in the SERWEB, does any one know some document besides the short README file. thank you regards

3 2

[Serusers] radius
by Kelvin Chua 21 May '03

21 May '03

hi guys, i'm trying to enable authentication through radius/ldap. i'm still using 0.8.10 and having errors on this: May 21 14:54:34 voip ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/auth.so>: /usr/local/lib/ser/modules/auth.so: undefined symbol: rc_avpair_add i confirmed radiusclient to be functioning by using radlogin and authentication works. i can't find the source code containing the function, hope somebody could help me out on this.... thanks by the way, when's 0.8.11 coming out?

2 1

[Serusers] SRCIP vs SRC_IP
by Juha Tuomala 21 May '03

21 May '03

http://www.iptel.org/ser/doc/seruser-html/x510.html Text: "It also passes request's source IP address in environment variable named SRC_IP." Code example: # first dump the message to a file using cat command exec_msg("printenv SRCIP > /tmp/exectest.txt; cat >> /tmp/exectest.txt"); Is there a typo in underscore? At least in the sources SCRIP seems to exist. BR, Juha -- tuomala(a)netnix.fi www.netnix.fi Valkjärventie 1, 02130 Espoo, Finland. +358 40 589 8929

2 1

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2003