sr-users September 2003

sr-users@lists.kamailio.org

86 participants
209 discussions

[Serusers] SER question - Has anyone been able to successfully use Polycom SIP phones with SER?

by Snyder, Scott A

SERusers, I am working on a pilot for SIP and am planning to purchase a server and install SER on it. I need to purchase several SIP hardphones to test and wanted to see if anyone had any recommendations. Are most of the "SIP compatible" phones out there still proprietary to a particular server? The phone in particular I was looking at is the Polycom Soundpoint IP 600, which won the "Editor's Choice" in a review by Network Computing http://www.nwc.com/shared/printArticle.jhtml?article=/1416/1416f2full.ht ml&pub=nwc . If this will not work, does anyone have ANY hardphone recommendations? Polycom says their product has only been tested with Broadcom's SIP server. I apologize for being such a newb...I am still trying to read up on SIP and understand the big picture. I appreciate any help or feedback. Thanks, Scott

21 years, 2 months

[Serusers] nathelper

by Dovid

Is there any way to see if a SIP message is from behind nat? The example for nathelper searches for Cisco ATA, but you could have that without nat and you could have a different phone behind nat. Can I always apply nat fixing? Does it break anything if it was not natted? (My SER is not behind nat. It might make a difference if SER itself is behind nat.) Is there still (0.8.11) the function add_rport()? SER does not complain with it there. Is it the same as force_rport? Does it do anything? Is it necessary? What does it do? (I see force_rport in nathelper.cfg.) Why would I want to add direction=active? Am I correct that there are 2 points in a SIP message that there could be problems from nat, 1-various SIP headers, and 2-SDP (c=, o=)? Does fix_nated_contact fix everything in the SIP message itself and fix_nated_sdp fix everything in SDP? Where would I want fix_nated_contact and fix_nated_sdp? Do I want fix_nated_contact in every message and fix_nated_sdp in INVITEs and its responses (provisional and OK)? Thanks. Dovid

21 years, 2 months

RE: [Serusers] NAT with ATA 186

by Steve Dolloff

I found an example config for nathelper in the modules/nethelper directory in the source tar. It seems to be working great, with one small exception. If I disconnect one of the ATA's and then reconnect it, it connects via a different port and now I have keep-alive messages going to both the old and the new port. In the serctl ul show, I see the old address still listed there. How do I set these to expire? Thanks, Stephen -----Original Message----- From: Steve Dolloff Sent: Wednesday, September 17, 2003 10:19 AM To: Serusers Subject: [Serusers] NAT with ATA 186 I am trying to enable an ATA 186 to work behind NAT. Is there anyway to do this without forwarding port 5060 to the ATA? Is nathelper related to this and if so, where can I find any information on how to use it? I have the via header option enabled on the ata. Is there something I need to do on SER? Thanks, Stephen _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

21 years, 2 months

[Serusers] Структуризация компаний и групп

by Учебный центр

Приглашаем руководителей и специалистов, заинтересованных в оптимальном развитии организационной структуры предприятия, принять участие в новом актуальном семинаре: "СТРУКТУРИЗАЦИЯ КОМПАНИЙ И ГРУПП. АНАЛИЗ И ОПТИМИЗАЦИЯ ОРГАНИЗАЦИОННОЙ СТРУКТУРЫ" 22-23 сентября 2003 года Семинар посвящен одной из важных задач современного менеджмента - построении эффективной организационной структуры. Цель семинара - рассмотреть роль и значение организационной структуры в системе управления компанией. Разобрать основы понятия "функция", классификацию функций на основные, обеспечивающие и функции менеджмента, приемы декомпозиции, построение дерева функций, организационной структуры и оптимального распределения ответственности. Для того, чтобы получить более подробную информацию о семинаре и зарегистрироваться в качестве участника, звоните нам по телефону: (095) 258-51-84 В программе семинара: Технология описания организационных структур. - Классификаторы в менеджменте. Система и элементы. - Бизнес-моделирование и бизнес-инжиниринг. - Разработка модели организационной структуры. Разработка организационно-управленческой документации. - Разработка "Положения об организационной структуре". - Разработка "Положения о подразделении". - Разработка "Положения о внутрифирменной деятельности". - Разработка "Должностной инструкции" и "Описания рабочего места сотрудника". Анализ и оптимизация организационной структуры. Реструктуризация и реформирование. - Анализ и оптимизация функций. - Анализ и оптимизация взаимодействий. - Технология проведения реструктуризации и реформирования компании. Особенность семинара: - на семинаре проводятся практические занятия по описанию, анализу и разработке организационной структуры с использованием специализированных программных средств, включая собственные программные разработки. Авторы семинара - консультант по управлению. Закончил Московский Физико-Технический Институт (Государственный Университет) - МФТИ по специальности "Системы управления". Работал в качестве консультанта по управлению (реализация проектов, проведение семинаров) с консалтинговыми компаниями. Для того, чтобы получить более подробную информацию о семинаре и зарегистрироваться в качестве участника, звоните нам по телефону: (095) 258-51-84 С уважением, Организаторы Для отписки используйте адрес remove(a)mebgamma.ru

21 years, 2 months

[Serusers] remove header

by Jakob Schlyter

hi, I need to remove any existing Remote-Party-ID headers before adding a new one - is there any simple way to do this? jakob

21 years, 2 months

[Serusers] NAT with ATA 186

by Steve Dolloff

I am trying to enable an ATA 186 to work behind NAT. Is there anyway to do this without forwarding port 5060 to the ATA? Is nathelper related to this and if so, where can I find any information on how to use it? I have the via header option enabled on the ata. Is there something I need to do on SER? Thanks, Stephen

21 years, 2 months

RE: [Serusers] Installation guide

by Klaus Darilion

Yes. In Redhat 9 the rpm sometimes hangs. Reboot the machine (then rpm works fine again) and verify the installation of the packages as root with the command: rpm -qa | grep ser regards, klaus > -----Original Message----- > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > Sent: Wednesday, September 17, 2003 1:16 PM > To: Klaus Darilion > Cc: 'serusers(a)lists.iptel.org' > Subject: RE: [Serusers] Installation guide > > > Hi, > 1. Yes rpm does not give me any error messages but it never > returns to the > shell prompt, it give me a blank line and do nothing. Please > advice. The > /etc/ser/ser.cfg file is in my system already and I am able > to start with > /etc/init.d/ser start. Does that means the packages is > already installed? > > > *Have a nice day (",)* > > Regards, > Shirley Toh > > > -----Original Message----- > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > Sent: Wednesday, September 17, 2003 6:39 PM > > To: Shirley Toh; serusers(a)lists.iptel.org > > Subject: RE: [Serusers] Installation guide > > > > When rpm does not give an error message and returns to the > shell prompt, > > then the installation was succesfull. > > > > Check if there is a /etc/ser/ser.cfg file and try to start > the proxy using > > /etc/init.d/ser start > > as root. > > > > Klaus > > > > PS: You should always send the emails to serusers list, so > that all the > > list subscribers may help you. > > > > -----Original Message----- > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > Sent: Wed 17.09.2003 10:10 > > To: Klaus Darilion > > Cc: > > Subject: RE: [Serusers] Installation guide > > Hi, > > I try to install the packages/redhat9/*.rpm from the > Terminal but > > typing the command "rpm -i /mypath/*/rpm" th screen show > nothing.. the > > packages is not installed and I am not sure of the problem > also. Can you > > tell me the basic components to install? Thank you. I have > follow the > > installation guide but I am still facing problem. Sorry I > am new to Linux. > > > > > > > > *Have a nice day (",)* > > > > Regards, > > Shirley Toh > > > > > -----Original Message----- > > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > > Sent: Wednesday, September 17, 2003 4:14 PM > > > To: Shirley Toh; Serusers List > > > Subject: RE: [Serusers] Installation guide > > > > > > Pleae explain your problems more detailed, for example > error messages, > > > ... > > > > > > Klaus > > > > > > > -----Original Message----- > > > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > > > Sent: Wednesday, September 17, 2003 9:51 AM > > > > To: Klaus Darilion > > > > Subject: RE: [Serusers] Installation guide > > > > > > > > > > > > Hi, > > > > I have problem installing the .rpm packages files into my > > > > system. Please > > > > help....and I have to install everything from the downloads > > > > from the web to > > > > have to working server? What are the basic components? > > > > > > > > *Have a nice day (",)* > > > > > > > > Regards, > > > > Shirley Toh > > > > > > > > > > > > > -----Original Message----- > > > > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > > > > Sent: Wednesday, September 17, 2003 1:59 PM > > > > > To: Shirley Toh > > > > > Subject: RE: [Serusers] Installation guide > > > > > > > > > > http://www.iptel.org/ser/doc/ser-howto/ser-Howto.html > > > > > http://lists.iptel.org/pipermail/serusers/ > > > > > > http://lists.iptel.org/pipermail/serusers/2003-September/002629 .html > > > > > > > > Klaus > > > > > > > > > > > > -----Original Message----- > > > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > > > Sent: Wed 17.09.2003 06:15 > > > > To: 'serusers(a)lists.iptel.org' > > > > Cc: > > > > Subject: [Serusers] Installation guide > > > > Hi, > > > > I have redhat Linux 9 on my system but I have problem > > > installing the SIP > > > > into the system. Can anyone help to guide me through the > > > process using the > > > > Shell command prompt to load the packages into my system. Thank you. > > > > > > > > *Have a nice day (",)* > > > > > > > > Regards, > > > > Shirley Toh > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > >

21 years, 2 months

RE: [Serusers] Installation guide

by Shirley Toh

Hi, 1. Yes rpm does not give me any error messages but it never returns to the shell prompt, it give me a blank line and do nothing. Please advice. The /etc/ser/ser.cfg file is in my system already and I am able to start with /etc/init.d/ser start. Does that means the packages is already installed? *Have a nice day (",)* Regards, Shirley Toh > -----Original Message----- > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > Sent: Wednesday, September 17, 2003 6:39 PM > To: Shirley Toh; serusers(a)lists.iptel.org > Subject: RE: [Serusers] Installation guide > > When rpm does not give an error message and returns to the shell prompt, > then the installation was succesfull. > > Check if there is a /etc/ser/ser.cfg file and try to start the proxy using > /etc/init.d/ser start > as root. > > Klaus > > PS: You should always send the emails to serusers list, so that all the > list subscribers may help you. > > -----Original Message----- > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > Sent: Wed 17.09.2003 10:10 > To: Klaus Darilion > Cc: > Subject: RE: [Serusers] Installation guide > Hi, > I try to install the packages/redhat9/*.rpm from the Terminal but > typing the command "rpm -i /mypath/*/rpm" th screen show nothing.. the > packages is not installed and I am not sure of the problem also. Can you > tell me the basic components to install? Thank you. I have follow the > installation guide but I am still facing problem. Sorry I am new to Linux. > > > > *Have a nice day (",)* > > Regards, > Shirley Toh > > > -----Original Message----- > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > Sent: Wednesday, September 17, 2003 4:14 PM > > To: Shirley Toh; Serusers List > > Subject: RE: [Serusers] Installation guide > > > > Pleae explain your problems more detailed, for example error messages, > > ... > > > > Klaus > > > > > -----Original Message----- > > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > > Sent: Wednesday, September 17, 2003 9:51 AM > > > To: Klaus Darilion > > > Subject: RE: [Serusers] Installation guide > > > > > > > > > Hi, > > > I have problem installing the .rpm packages files into my > > > system. Please > > > help....and I have to install everything from the downloads > > > from the web to > > > have to working server? What are the basic components? > > > > > > *Have a nice day (",)* > > > > > > Regards, > > > Shirley Toh > > > > > > > > > > -----Original Message----- > > > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > > > Sent: Wednesday, September 17, 2003 1:59 PM > > > > To: Shirley Toh > > > > Subject: RE: [Serusers] Installation guide > > > > > > > > http://www.iptel.org/ser/doc/ser-howto/ser-Howto.html > > > > http://lists.iptel.org/pipermail/serusers/ > > > > http://lists.iptel.org/pipermail/serusers/2003-September/002629.html > > > > > > > > Klaus > > > > > > > > > > > > -----Original Message----- > > > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > > > Sent: Wed 17.09.2003 06:15 > > > > To: 'serusers(a)lists.iptel.org' > > > > Cc: > > > > Subject: [Serusers] Installation guide > > > > Hi, > > > > I have redhat Linux 9 on my system but I have problem > > > installing the SIP > > > > into the system. Can anyone help to guide me through the > > > process using the > > > > Shell command prompt to load the packages into my system. Thank you. > > > > > > > > *Have a nice day (",)* > > > > > > > > Regards, > > > > Shirley Toh > > > > > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > > > > > >

21 years, 2 months

RE: [Serusers] Installation guide

by Klaus Darilion

When rpm does not give an error message and returns to the shell prompt, then the installation was succesfull. Check if there is a /etc/ser/ser.cfg file and try to start the proxy using /etc/init.d/ser start as root. Klaus PS: You should always send the emails to serusers list, so that all the list subscribers may help you. -----Original Message----- From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] Sent: Wed 17.09.2003 10:10 To: Klaus Darilion Cc: Subject: RE: [Serusers] Installation guide Hi, I try to install the packages/redhat9/*.rpm from the Terminal but typing the command "rpm -i /mypath/*/rpm" th screen show nothing.. the packages is not installed and I am not sure of the problem also. Can you tell me the basic components to install? Thank you. I have follow the installation guide but I am still facing problem. Sorry I am new to Linux. *Have a nice day (",)* Regards, Shirley Toh > -----Original Message----- > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > Sent: Wednesday, September 17, 2003 4:14 PM > To: Shirley Toh; Serusers List > Subject: RE: [Serusers] Installation guide > > Pleae explain your problems more detailed, for example error messages, > ... > > Klaus > > > -----Original Message----- > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > Sent: Wednesday, September 17, 2003 9:51 AM > > To: Klaus Darilion > > Subject: RE: [Serusers] Installation guide > > > > > > Hi, > > I have problem installing the .rpm packages files into my > > system. Please > > help....and I have to install everything from the downloads > > from the web to > > have to working server? What are the basic components? > > > > *Have a nice day (",)* > > > > Regards, > > Shirley Toh > > > > > > > -----Original Message----- > > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > > Sent: Wednesday, September 17, 2003 1:59 PM > > > To: Shirley Toh > > > Subject: RE: [Serusers] Installation guide > > > > > > http://www.iptel.org/ser/doc/ser-howto/ser-Howto.html > > > http://lists.iptel.org/pipermail/serusers/ > > > http://lists.iptel.org/pipermail/serusers/2003-September/002629.html > > > > > > Klaus > > > > > > > > > -----Original Message----- > > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > > Sent: Wed 17.09.2003 06:15 > > > To: 'serusers(a)lists.iptel.org' > > > Cc: > > > Subject: [Serusers] Installation guide > > > Hi, > > > I have redhat Linux 9 on my system but I have problem > > installing the SIP > > > into the system. Can anyone help to guide me through the > > process using the > > > Shell command prompt to load the packages into my system. Thank you. > > > > > > *Have a nice day (",)* > > > > > > Regards, > > > Shirley Toh > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > >

21 years, 2 months

RE: [Serusers] Installation guide

by Klaus Darilion

Pleae explain your problems more detailed, for example error messages, ... Klaus > -----Original Message----- > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > Sent: Wednesday, September 17, 2003 9:51 AM > To: Klaus Darilion > Subject: RE: [Serusers] Installation guide > > > Hi, > I have problem installing the .rpm packages files into my > system. Please > help....and I have to install everything from the downloads > from the web to > have to working server? What are the basic components? > > *Have a nice day (",)* > > Regards, > Shirley Toh > > > > -----Original Message----- > > From: Klaus Darilion [SMTP:darilion@ict.tuwien.ac.at] > > Sent: Wednesday, September 17, 2003 1:59 PM > > To: Shirley Toh > > Subject: RE: [Serusers] Installation guide > > > > http://www.iptel.org/ser/doc/ser-howto/ser-Howto.html > > http://lists.iptel.org/pipermail/serusers/ > > http://lists.iptel.org/pipermail/serusers/2003-September/002629.html > > > > Klaus > > > > > > -----Original Message----- > > From: Shirley Toh [mailto:shirleytoh@jpcomputers.com.sg] > > Sent: Wed 17.09.2003 06:15 > > To: 'serusers(a)lists.iptel.org' > > Cc: > > Subject: [Serusers] Installation guide > > Hi, > > I have redhat Linux 9 on my system but I have problem > installing the SIP > > into the system. Can anyone help to guide me through the > process using the > > Shell command prompt to load the packages into my system. Thank you. > > > > *Have a nice day (",)* > > > > Regards, > > Shirley Toh > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > >

21 years, 2 months

← Newer
1
...
8
9
10
11
12
13
14
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2003