sr-users February 2004

sr-users@lists.kamailio.org

144 participants
382 discussions

RE: [Serusers] IBMS Integration with SIP/SER
by Ng, Soo Sim 14 Feb '04

14 Feb '04

No.What I meant was the Intelligent Building Management System :-) I am not expert this subject matter. Being ask on how SIP system can complement the IBMS. Doing some background work on what are the potential SIP/SER functions/feature can do to work with IBMS (non-product/vendor specific). Thanks SSng -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: 14 Februari 2004 1:06 To: Ng, Soo Sim; serusers(a)lists.iptel.org Subject: Re: [Serusers] IBMS Integration with SIP/SER At 05:36 PM 2/13/2004, Ng, Soo Sim wrote: >Content-Class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C3F24F.948D0510" > >I know IBMS term is big word. I have to confess I don't know this big word -- I guess you are not referring to The Institute of Biomedical Science, are you ;) ? -jiri >Just wonder have anyone attempt to integrate any IBMS with SIP >especially using SER of any sort, it could be a simple as using >appliance controller such as X.10 to switch on/off a lamp or >open/clooor door, from an SIP UA, such as IP Phone, up to programming a >plug-ins to interface with IBMS system controller it self. > >Am exploring how this kind of integration has matured, what kind of >functions/feature that SIP can offer to the IBMS. > >What is development effort of SER is required to make this kind >integration works? > >Thanks > >SSng >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

Re: [Serusers] Online Status
by Kapil Dhawan 13 Feb '04

13 Feb '04

This is what i wanted to know to check if user is online or not... >From: Klaus Darilion <klaus.mailinglists(a)pernau.at> >To: kapil dhawan <oswriter(a)hotmail.com> >CC: serusers(a)lists.iptel.org >Subject: Re: [Serusers] Online Status >Date: Fri, 13 Feb 2004 09:16:08 +0100 > > > >kapil dhawan wrote: > >>Hi all >> >>How can i check whether a user is online or not? >> >>i mean not using location table but thru some function or ping or >>etc.......means his phone is connected to our server? > >Connected? I guess you mean registered. To check if a user is registered >(connected?) use the location table. If you want to know if the client is >running, you can send an OPTIONS request to the registered contact address. >But I don't know how to do it from ser. > >Klaus > > > > > > >> >>_________________________________________________________________ >>Easiest Money Transfer to India . Send Money To 6000 Indian Towns. >>http://go.msnserver.com/IN/42198.asp Easiest Way To Send Money Home! >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ MSN Hotmail now on your Mobile phone. http://server1.msn.co.in/sp03/mobilesms/ Click here.

2 1

[Serusers] rtpproxy & ser (stable version)
by Jan Czmok 13 Feb '04

13 Feb '04

Hi, does anyone can help me on getting ser & SERMediaProxy working together? Or HOW do i get NATed clients to work with ser ? my versions: ser: version: ser 0.8.12 (i386/linux) (debian package) rtpproxy: SERMediaProxy rtpproxy.py 1.0 the described method on the voip-info page shows nathelper (but only the newest version). any help appreciated. --jan

2 1

[Serusers] Motorola VT1000v with Ser
by Andy Singh 13 Feb '04

13 Feb '04

Just wondering if any tried using Motorola VT1000v box with Ser. It's a SIP UA and you can plug in your analog phone into it to make calls. You can find out more on this at http://broadband.motorola.com/consumers/products/vt1000v/ and company called vonage sells the VOIP service using this to consumer. Thanks Andy

4 3

[Serusers] call transfert with a cisco 2600
by laurent Schweizer 13 Feb '04

13 Feb '04

Hello, I use a cisco 2600 as PSTN gateway and I cannot transfer correctly a call. When the 2600 receive a call, the call is directed to a first 7960 and then I want to transfer this call to an other 7960 . I have attached ethereal capture Thanks Schweizer Laurent

2 1

Re: [Serusers] IBMS Integration with SIP/SER
by Jiri Kuthan 13 Feb '04

13 Feb '04

At 05:36 PM 2/13/2004, Ng, Soo Sim wrote: >Content-Class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C3F24F.948D0510" > >I know IBMS term is big word. I have to confess I don't know this big word -- I guess you are not referring to The Institute of Biomedical Science, are you ;) ? -jiri >Just wonder have anyone attempt to integrate any IBMS with SIP especially using SER of any sort, it could be a simple as using appliance controller such as X.10 to switch on/off a lamp or open/clooor door, from an SIP UA, such as IP Phone, up to programming a plug-ins to interface with IBMS system controller it self. > >Am exploring how this kind of integration has matured, what kind of functions/feature that SIP can offer to the IBMS. > >What is development effort of SER is required to make this kind integration works? > >Thanks > >SSng >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] IBMS Integration with SIP/SER
by Ng, Soo Sim 13 Feb '04

13 Feb '04

I know IBMS term is big word. Just wonder have anyone attempt to integrate any IBMS with SIP especially using SER of any sort, it could be a simple as using appliance controller such as X.10 to switch on/off a lamp or open/clooor door, from an SIP UA, such as IP Phone, up to programming a plug-ins to interface with IBMS system controller it self. Am exploring how this kind of integration has matured, what kind of functions/feature that SIP can offer to the IBMS. What is development effort of SER is required to make this kind integration works? Thanks SSng

1 0

Re: [Serusers] Problem with serweb
by Jiri Kuthan 13 Feb '04

13 Feb '04

Reading README is a great way to fix your problem, which is described there. http://cvs.berlios.de/cgi-bin/viewcvs.cgi/serweb/iptel/INSTALL?rev=1.9&cont… -jiri At 03:56 PM 2/13/2004, Mike Fallows wrote: >Guys, > >I am trying to get Serweb to work, and I aam getting this error message: > >Fatal error: Call to undefined function: connect() in >/var/www/html/phplib/db_mysql.inc on line 74 > >Any ideas? > >Thanks. > >Michael Fallows > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] Problem with serweb
by Mike Fallows 13 Feb '04

13 Feb '04

Sent the wrong error message: Should read: Fatal error: Call to undefined function: mysql_pconnect() in /var/www/html/phplib/db_mysql.inc on line 73 Michael Fallows

1 0

[Serusers] Problem with serweb
by Mike Fallows 13 Feb '04

13 Feb '04

Guys, I am trying to get Serweb to work, and I aam getting this error message: Fatal error: Call to undefined function: connect() in /var/www/html/phplib/db_mysql.inc on line 74 Any ideas? Thanks. Michael Fallows

1 0

← Newer
1
...
19
20
21
22
23
24
25
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2004