sr-users March 2004

sr-users@lists.kamailio.org

145 participants
286 discussions

by Joao Carlos Moura

Hi all, I read on SERMediaProxy and I followed the installation steps. I executed cvs update - Pd to get the module mediaproxy.so. It did not appear in the subdiretorio you modules of the SER SIP. How I obtain this module? Already they had used this solution and functioned? Necessary of a solution of Outbound Proxy, where I obtain? Thank You Joao Carlos Moura

20 years, 6 months

Re: [Serusers] SER & freeradius !

by Anton

Hello Daniel-Constantin Mierla & List Very interesting that when I've commented out the line about to authentification, e.g: if (!radius_www_authorize("fptnet.vn")) { www_challenge("fptnet.vn", "0"); break; }; it works ! SIPPC can registred with SER ! What am I wrong ? Please HELP ! Multiple thanks & regards, Anton ----- Original Message ----- From: "Anton" <antontran(a)fptnet.com.vn> To: <daniel(a)iptel.org> Cc: <serusers(a)lists.iptel.org> Sent: Monday, March 15, 2004 11:34 AM Subject: Re: [Serusers] SER & freeradius ! > Hello Daniel-Constantin Mierla & List > > I've followed your advice, and still not see any reply from ser when monitor > net traffic by ethereal . > > Please, help me configure SER. > Thank you very much & best regard > Anton > > PS: Here is my ser.cfg: > ================== > debug=3 > fork=yes > log_stderror=yes > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > alias="fptnet.vn" > alias="hnluat.edu" > alias="sgluat.edu" > alias="sg.fptnet.com" > alias="fptnet.com" > > #loadmodule "/usr/local/lib/ser/modules/mysql.so" > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > #loadmodule "/usr/local/lib/ser/modules/uri_radius.so" > #loadmodule "/usr/local/lib/ser/modules/uri.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > #loadmodule "/usr/local/lib/ser/modules/acc.so" > loadmodule "/usr/local/lib/ser/modules/xlog.so" > > modparam("usrloc", "db_mode", 0) > #modparam("uri_radius", "service_type", 11) > modparam("rr", "enable_full_lr", 1) > modparam("auth_radius", "radius_config", > "/usr/local/etc/radiusclient/radiusclient.conf") > #modparam("acc", "radius_config", > "/usr/local/etc/radiusclient/radiusclient.conf") > #modparam("xlog", "buf_size", 8192) > > > ### > #modparam("acc", "log_level", 1) > #modparam("acc", "log_flag", 1) > #modparam("acc", "radius_flag", 1) > modparam("tm", "fr_inv_timer", 15 ) > modparam("tm", "fr_timer", 10 ) > modparam("auth", "secret", "testing123") > modparam("auth_radius", "service_type", 15) > ### > > > route{ > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > # if ( msg:len > max_len ) { > # sl_send_reply("513", "Message too big"); > # break; > # }; > > record_route(); > if (loose_route()) { > t_relay(); > break; > }; > > if (uri==myself) { > xlog("L_ERR", " method <%rm> <%fu> <%tu>\n"); > if (method=="REGISTER") { > # if (!www_authorize("mydomain", "subscriber")) { > if (!radius_www_authorize("fptnet.vn")) { > www_challenge("fptnet.vn", "0"); > break; > }; > > save("location"); > break; > }; > > setflag(1); > if (method=="INVITE") record_route(); > > if (method=="REGISTER") { > log(1, "REGISTER received\n"); > } else { > log(1, "non-REGISTER received\n"); > }; > if (uri=~"sip:.*[@:]fptnet.vn") { > log(1, "request for fptnet.vn\n"); > } else { > log(1, "request for other domain received\n"); > }; > > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > #}; > if (!t_relay()) { > sl_reply_error(); > }; > > }; > } > > > > ============================= > > ----- Original Message ----- > From: "Daniel-Constantin Mierla" <daniel(a)iptel.org> > To: "Anton" <antontran(a)fptnet.com.vn> > Cc: <serusers(a)lists.iptel.org> > Sent: Friday, March 12, 2004 5:07 PM > Subject: Re: [Serusers] SER & freeradius ! > > > > Hello, > > it might be possible that the condition uri=~"fptnet.vn" does not match. > > It is better to use uri==myself and put alias="fptnet.vn" and other > > hostnames you may have just below the line fifo="/tmp/ser_fifo". > > > > If still doesnt work, watch the network (using ngrep or ethereal) and > > see how the SIP messages are routed. Also you can set log_stderror=yes, > > start ser from a console and you will be able to see lot of debug > messages. > > > > .Daniel > > > > On 3/12/2004 4:22 AM, Anton wrote: > > > > > Hello List, > > > > > > Please help me! > > > I've installed Ser & followed the RADIUS Howto in ser website. > > > Every thing seems to run, but radius is idle all the time, SIPPS > > > cannot registre with SER. > > > > > > Here is my ser.cfg file > > > > > > What I'm wrong ? > > > Any info is appreciated, > > > Best regards, > > > Anton > > > > > > =============================ser.cfg file =============== > > > > > > debug=7 > > > fork=yes > > > log_stderror=no > > > > > > check_via=no # (cmd. line: -v) > > > dns=no # (cmd. line: -r) > > > rev_dns=no # (cmd. line: -R) > > > port=5060 > > > children=4 > > > fifo="/tmp/ser_fifo" > > > > > > #loadmodule "/usr/local/lib/ser/modules/mysql.so" > > > loadmodule "/usr/local/lib/ser/modules/sl.so" > > > loadmodule "/usr/local/lib/ser/modules/tm.so" > > > loadmodule "/usr/local/lib/ser/modules/rr.so" > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > > #loadmodule "/usr/local/lib/ser/modules/uri_radius.so" > > > #loadmodule "/usr/local/lib/ser/modules/uri.so" > > > loadmodule "/usr/local/lib/ser/modules/auth.so" > > > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > > #loadmodule "/usr/local/lib/ser/modules/acc.so" > > > loadmodule "/usr/local/lib/ser/modules/xlog.so" > > > > > > modparam("usrloc", "db_mode", 0) > > > #modparam("uri_radius", "service_type", 11) > > > modparam("rr", "enable_full_lr", 1) > > > modparam("auth_radius", "radius_config", > > > "/usr/local/etc/radiusclient/radiusclient.conf") > > > #modparam("acc", "radius_config", > > > "/usr/local/etc/radiusclient/radiusclient.conf") > > > #modparam("xlog", "buf_size", 8192) > > > > > > > > > ### > > > #modparam("acc", "log_level", 1) > > > #modparam("acc", "log_flag", 1) > > > #modparam("acc", "radius_flag", 1) > > > modparam("tm", "fr_inv_timer", 15 ) > > > modparam("tm", "fr_timer", 10 ) > > > modparam("auth", "secret", "testing123") > > > modparam("auth_radius", "service_type", 15) > > > ### > > > > > > > > > route{ > > > > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > # if ( msg:len > max_len ) { > > > # sl_send_reply("513", "Message too big"); > > > # break; > > > # }; > > > > > > record_route(); > > > if (loose_route()) { > > > t_relay(); > > > break; > > > }; > > > > > > if (uri=~"fptnet.vn") { > > > xlog("L_ERR", " method <%rm> <%fu> <%tu>\n"); > > > if (method=="REGISTER") { > > > # if (!www_authorize("mydomain", "subscriber")) { > > > if (!radius_www_authorize("fptnet.com.vn")) { > > > www_challenge("fptnet.com.vn", "0"); > > > break; > > > }; > > > > > > save("location"); > > > break; > > > }; > > > > > > setflag(1); > > > if (method=="INVITE") record_route(); > > > > > > if (method=="REGISTER") { > > > log(1, "REGISTER received\n"); > > > } else { > > > log(1, "non-REGISTER received\n"); > > > }; > > > if (uri=~"sip:.*[@:]fptnet.vn") { > > > log(1, "request for fptnet.vn\n"); > > > } else { > > > log(1, "request for other domain received\n"); > > > }; > > > > > > if (!lookup("location")) { > > > sl_send_reply("404", "Not Found"); > > > break; > > > }; > > > #}; > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > > > > }; > > > } > > > > > > > > > > > > > > > > > >------------------------------------------------------------------------ > > > > > >_______________________________________________ > > >Serusers mailing list > > >serusers(a)lists.iptel.org > > >http://lists.iptel.org/mailman/listinfo/serusers > > > >

20 years, 6 months

[Serusers] Messenger - Delay to see contact status

by Mark

Hello: I've installed SER in a linux box, Windows Messenger 4.7 in 2 Win XP boxes and MSN Messenger 4.6 in a Win NT, my objective is to deploy a local network IM system. I have created 3 users with serctl add <user> <password> <email>: mike mark john Authentication is mysql based, and it works fine. In Windows Messenger, Mike has added Mark and John as contacts. Mark has added Mike and John. In MSN Messenger, John has added Mark and Mike as contacts. My problem is: when a user (Mark) initiates a session, he can see correctly all contacts and the real state of these contacts (online, offline, ...). But the online contacts can't see Mark online until some minutes: after this delay (from a few seconds to some minutes), online contacts receive a notification like "Mark initiates session". Users that log in can see real contact status. But these contacts can't see this login until some time. Is there a way to reduce this delay?. I've played with some values like registrar default expires, usrloc timer_interval, ... without success. Thank you, Mark

20 years, 6 months

[Serusers] sl_send_reply

by Srbislav Cvetkovic

Can anyne tell me what can cause this error in my log file that hangs up my call after 16 seconds? Mar 12 15:47:24 voip /usr/sbin/ser[3144]: Warning: sl_send_reply: I won't send a reply for ACK!! I thought there is no reply for ACK. Once the conection is established the audio should flow untill someone sends a BYE. BUt i establish the connection, hear the audio from the other side and then the call is being dropped. Anyne has any ideas? thanks. Srbo Cvetkovic | CityNet, Inc. srbo(a)city-net.com | Pittsburgh, PA voice: 412.481.5406 | fax: 412.431.1315

20 years, 6 months

[Serusers] Force SER to re-read aliases tables

by Fábio Silvestri

20 years, 6 months

Re: Re: [Serusers] INstall modules mysql

by Jean-Marc Therond

> >Hey Jean-marc > >Im not sure, but I think you dont have the mysql-client stuff >installed.. had a simluar problem a couple of weeks ago. >So, install mysql-client.. etc. .and try again > >- Atle Thanks for your answer but when i do : rpm -qa | grep MySQL-* MySQL-client .... etc ... JM

20 years, 6 months

[Serusers] cpl adding to ser

by Izzi Fiorenzo

Hello everybody, I'm tryng to adding cpl-c to my ser proxy in linux ambient. I removed from Makefile cpl-c string in the line: exclude_module?= cpl cpl-c ext extcmd\ . . . Then I re-compiled: make modules Diagnostic gave me error: cpl_proxy.h 444 structures has no member named 'register_req_cb' cpl_proxy.h 450 structures has no member named 'register_req_cb' What I'm wronging? Enzo

20 years, 6 months

[Serusers] INstall modules mysql

by Jean-Marc Therond

Hi all, After download the stable version of ser ( cvs ), i did : make prefix=/usr/local install and the module mysql is not installed. so i did : make include_modules="mysql" modules i had an error, see the file log_install... Any ideas ? Thanks JM

20 years, 6 months

[Serusers] FQDN in Via and Record Route header

by zeusng

Hi, Is it possible to have FQDN in the Via and Record-route header instead of IP address in SER? Thanks, Zeus Ng ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, you are prohibited from reading, copying, distributing and using the information. Please contact the sender immediately by return email and destroy the original message. ******************************************************************

20 years, 6 months

[Serusers] Update: SIP call to ISDN subscribe

by Manuel Goertz

20 years, 6 months

← Newer
1
...
17
18
19
20
21
22
23
...
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2004