Hi all! I am interested in creating CDRs for calls made with ser, including the start time and the end time, but I am having trouble with it. I've read the acc module to be able to write CDRs, but the acc table contains information about each transaction.
How could be possible to generate CDRs for SER calls, including the start and the end (or lenght) of the call. Thank you beforehand for your help.
Rafael Morón
Hi guys!
I'm still with troubles with SER configured with rtpproxy or like outbound proxy!
When I make a call I can see packets traversing my proxy, but every time, after
30 seconds the call are ended!
Now I have founded with ngrep a new information that can be help:
U ser-machine:5060 -> ser-outbound:5060
SIP/2.0 483 Too Many Hops..Via: SIP/2.0/UDP ser-outbound;rport=5060;branc
h=z9hG4bK11a.f7b42407.0..Via: SIP/2.0/UDP 192.168.200.2:5060;rport=5060;rec
eived=200.180.11.111..From: sip:fabio@mydomain.net;tag=263651123
..To: <sip:55482381010@mydomain.net;user=phone>;tag=6203B7F4-310..Cal
l-ID: 3255408633@192.168.200.2..CSeq: 2 BYE..Server: Sip EXpress router (0.
8.12 (i386/linux))..Content-Length: 0..Warning: 392 ser-machine:5060 "No
isy feedback tells: pid=9935 req_src_ip=ser-machine req_src_port=5060 i
n_uri=sip:99955482381010@200.196.28.120;user=phone out_uri=sip:999554823810
10@ser-machine;user=phone via_cnt==12"....
When above message shows in ngrep the call was terminated!
Regards.
--
|o
|o Se eu fosse você, quem é que seria EU?
|o
|o Fabio Silvestri
|o fabio(a)informatec.com.br
|o ICQ: 1667351
|o
Hi! try this:
http://lists.iptel.org/pipermail/serusers/2004-February/005996.html
Klaus
PS: please always Cc: to the list
Doug R wrote:
> I just subscribed to the list - is there another source to find them? I tried web searches for ser.cfg files but not many were found other than standard.
>
>
> ---------- Original Message ----------------------------------
> From: Klaus Darilion <klaus.mailinglists(a)pernau.at>
> Date: Mon, 08 Mar 2004 23:19:21 +0100
>
>
>>Hi!
>>
>>Take a look at the config files posted by some other users here at the
>>list (e.g. by me some time before).
>>
>>regards,
>>Klaus
>>
>>Doug R wrote:
>>
>>>Hi, I'm having trouble getting a SER system running. I'm new to the list, but I havent' found a working config for our setup. What I want to do is this:
>>>
>>>SER server, NAT compatible for Internet-based users
>>>PSTN calling via an Asterisk server.
>>>
>>>
>>>I'm trying to use "Outbound Proxy" feature, like FWD uses, but I can't find the software that does that specifically. I searched everywhere for an "Outbound proxy" server, but can't find one. I tried the demo .cfg files for nathelper but I can't get them to work right.
>>>
>>>Anyone have a similar cfg file?
>>>
>>>Thanks,
>>>Doug R.
>>>
>>>
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>
>>
>
>
>
>
Hi, I'm having trouble getting a SER system running. I'm new to the list, but I havent' found a working config for our setup. What I want to do is this:
SER server, NAT compatible for Internet-based users
PSTN calling via an Asterisk server.
I'm trying to use "Outbound Proxy" feature, like FWD uses, but I can't find the software that does that specifically. I searched everywhere for an "Outbound proxy" server, but can't find one. I tried the demo .cfg files for nathelper but I can't get them to work right.
Anyone have a similar cfg file?
Thanks,
Doug R.
Hello
I would like to know whether some of you has tested SER with DIAMETER
module and what problems happened.
Do you know where can I get a free diameter server to make my own tests?
Thank you very much
Regards,
Curro
Dear serusers
Need your help:We installed SER successfully with serctl moni & MySQL working normally.Our server haven't any domain name just IP address with: 194.165.196.72.
There are two problem with the registration problem:
1,Authenticaiton problem: Be able to log on the server without username and password by SIP and working normally,but if use the digest authentication mode by uncomment of the code of :
# if (!www_authorize("194.165.196.72", "subscriber")) {
# www_challenge("194.165.196.72", "0");
# break;
# };,
the authentication cann't work with the subscribers in the list in MySQL database "ser".
2,NAT problem:While we log on the server with Windows Messager or other UA software with Public IP address,it works normally.But if we use the UA software behind the router(ADSL router) ,cann't log on the SER server,and the "serctl moni"will appear the UA software(behind router) log in location(LAN address as 192.168.1.2) and record it to the MySQL "location" table of database "ser".
How to solve the problem above? thanks very much.
It's our configuration file below down:
#
# $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
listen=194.165.196.72
listen=127.0.0.1
alias=194.165.196.72
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
loadmodule "/usr/lib/ser/modules/acc.so"
loadmodule "/usr/lib/ser/modules/exec.so"
loadmodule "/usr/lib/ser/modules/group.so"
loadmodule "/usr/lib/ser/modules/print.so"
loadmodule "/usr/lib/ser/modules/textops.so"
loadmodule "/usr/lib/ser/modules/uri.so"
loadmodule "/usr/lib/ser/modules/nathelper.so"
# ----------------- setting module-specific parameters ---------------
# ------------- tm parameters
modparam("tm", "fr_timer", 12)
modparam("tm", "fr_inv_timer", 24)
# ------------- accounting parameters
modparam("acc", "log_missed_flag", 3)
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser")
modparam("auth_db", "db_url", "sql://ser:heslo@localhost/ser")
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# save("location");
# Uncomment this if you want to use digest authentication
# if (!www_authorize("194.165.196.72", "subscriber")) {
# www_challenge("194.165.196.72", "0");
# break;
# };
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
祝
商祺！
Michael Shi( Shi Jia Lu石佳璐）
Director
Podium Vision Ltd (Shanghai,China Branch)
Tel: +86 (0)21 63296364
Mobile:+86 13311713825,+86 13916750280
Fax: +86 (0)21 63296364
MSN：glacier_shi @ hotmail.com
Email: michael(a)podiumvision.co.uk
This communication contains confidential information intended solely for the use of the individual/s and/or entity or entities to whom it was intended to be addressed. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of the contents of this transmission is prohibited. If you have received this communication in error, please contact the sender immediately, delete this communication from your system, and do not disclose its contents to any third party, or use its contents. Any opinions expressed are solely those of the author.
Hi all! I am interested in creating CDRs for calls made with ser, including the start time and the end time, but I am having trouble with it. I've read the acc module to be able to write CDRs, but the acc table contains information about each transaction.
How could be possible to generate CDRs for SER calls, including the start and the end (or lenght) of the call. Thank you beforehand for your help.
Rafael Morón
Good day.
Installed it. Didn't yet configure it. Just brought it up. Have 2 clients
both running Windows Messenger under WinXP. They sign up. When trying to
send messages get "The message couldn't be delivered to all users" error
message. Weird thing the voice calls in Messenger get through easily!!!!
Sorry don't have time to go through all of the manuals for now but I've read
through the SIP protocol manual and as far as i now know there is no problem
in the connection itself, just within SER configuration. What should I do I
have to get the ser server running as soon as I can. Thank you all in
advance.
Hendrew Kobets
Hi,
I am really new with SER. I ve downloaded and installed
SER on red hat linux ver 9. The never ending problem which
I am facing is that as soon as i install mysql the SER
stops runing. i try to start it again through /sbin/ser
but i get an error msg. And the msg which i get is :
ERROR: loading config file(/usr/local/etc/ser/ser.cfg): No
such file or directory
... I ve got no clue why its giving me this message.
please help me out on this. Can you please send me step by
step guide lines for any messenger to downloaded and how
to configure mysql ver 4.0 so that I can benifit from
SER.
thanks
shahzad sadiq
Hi,
Can you kindly tell me how can be sure that rtpproxy is working on my ser
and working properly? thank you!!
Regards,
shirley
> -----Original Message-----
> From: Daniel Liu [SMTP:daniel.liu@cu88.com]
> Sent: Sunday, March 07, 2004 5:07 PM
> To: Shirley
> Cc: Patrick Muldoon; serusers(a)lists.iptel.org
> Subject: Re: No Audio
>
> Dear Shirley,
> You need enable nathelper module in SER or buy a commercial
> SIP OutBound Proxy.
> Our company's SIP Penetrator is a Session Boarder Controler.It can
> act as SIP OutBound Proxy.
>
> regards,
> Daniel Liu
>
> URLs from iptel.org, I hope this is useful for you.
> http://www.portaone.com/~sobomax/rtpproxy.tar
> http://sermediaproxy.dns-hosting.info/
>
> Shirley write:
>
> > Hi,
> >
> > Thank you for the reply.
> >
> > Do you use before using UA behind Symmetric NAT to make to the other UA
> > behind Symmetric NAT? As I am doing this, but there is no audio. I have
> > attached the ser.cfg. Please kindly advise have been a long problem
> > already.Thank u!!
> >
> > <<ser.cfg>>
> > Regards,
> > Shirley
> >
> >> -----Original Message-----
> >> From: Patrick Muldoon [SMTP:doon@inoc.net]
> >> Sent: Saturday, March 06, 2004 11:42 AM
> >> To: serusers(a)lists.iptel.org
> >> Subject: Re: [Serusers] No Audio
> >>
> >> On Friday 05 March 2004 10:24 pm, Shirley wrote:
> >> > Hi ,
> >> >
> >> > I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast
> >> > message and there is no audio transmitted.
> >> > <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do
> anyone
> >> > have this before? Please help?
> >> >
> >> > regards,
> >> > shirley
> >>
> >> arp = Address Resolution Protocol. It is how hosts on the same layer 2
>
> >> network find each other. So basically 192.168.0.177 is looking for
> the
> >> MAC
> >> address of 192.168.0.142. This is normal.
> >>
> >> -:Patrick
> >>
> >> --
> >> Patrick Muldoon
> >> Network/Software Engineer
> >> INOC (http://www.inoc.net)
> >> PGPKEY (http://www.inoc.net/~doon)
> >> Key ID: 0x370D752C
> >>
> >> Beware of programmers who carry screwdrivers. - Leonard Brandwein
> >>
> >> _______________________________________________
> >> Serusers mailing list
> >> serusers(a)lists.iptel.org
> >> http://lists.iptel.org/mailman/listinfo/serusers
>
