sr-users November 2005

sr-users@lists.kamailio.org

245 participants
570 discussions

by Iqbal

Hi I am doing the following and for some reason it doesn't seem to work (please ignore syntax) if (uri=0[1-9] { substr/^0/00/} and then if {uri=00) Now should the second if statement now match, or not, it my config it doesn't seem to. iqbal

19 years

[Users] Geting status and reason in failure_route

by Taras Bendik

Hi ----------------------------- failure_route[1] { if (t_check_status("408|500|503")) { t_reply("503", "Sorry"); } } ----------------------------- Is it posible to add loging in failure route, so User get 503, but I get acctual info on what happen, because $rs $rr work only in onreply_route, but I need them or any equivalent in failure_route? So I can log exactly what happen. Regards, Taras

19 years

[Users] $ruri

by Taras Bendik

Hi Im using avp_write("sip:123456@1.2.3.4:4321", "i:100"); avp_pushto("$ruri","i:100"); t_relay(); And this is sended to 1.2.3.4:4321 like : INVITE sip:123456@1.2.3.4:4321 SIP/2.0 And this works fine. However can I make it some how to generate message like this : INVITE sip:123456 SIP/2.0 ??? Or in this case I need to use : avp_write("sip:123456", "i:100"); avp_pushto("$ruri","i:100"); t_relay_to_udp("1.2.3.4","4321"); Regards, Taras

19 years

[Users] LCR documentation, examples, pointers?

by rushowr

Hello all, Hate to be a bother to the list, but the documentation for the LCR module (and googling afterwards) left me slightly puzzled. . . The way I read it, it seems like EVERY user on the system would have to have an entry in the gw table, in order to match the FROM URI and get a gateway prioritized.... Anyone have some light to shed on LCR? Maybe a solid doc somewhere? Other than that, please keep up the excellent work! O_SER is definitely a wonderful piece of work! SKM

19 years

[Serusers] ACC early_media issue ...

by Mamen xu

Hello, all: I am using SER interworking with Cisco26 as PSTN gateway. So far, everything goes OK but the Radius billing. There is only STOP Radius request with no START Radius request at first. I think it's due to 183 with SDP issue. But it seems early_media in ACC module didn't give it a remedy. BTW, START/STOP runs OK in intra-domain call..which including 180 without SDP in signaling loop. My ser.cfg is as below: modparam("acc", "log_level",1) modparam("acc","radius_flag",1) modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc",report_ack",0) modparam("acc",early_media",1) # failed_transaction,report_cancels,radius_missed_flag...[uncommented] Who can rescue me? Thanks.

19 years

[Serusers] Audio player for SEMS

by hemal.sheth＠wipro.com

We are trying to use SEMS along with SER in our lab setup We have configured a dedicated SEMS for one IP phone to start with And enabled the announcement plug-in But the announcement message is not played Where does SEMS take the default player from? Thanks Hemal Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

19 years

[Users] Re: nat transversal with mediaproxy

by Daryl Sanders

On 11/13/05, serge messa <sergepmessa(a)yahoo.fr> wrote: > Hi > > Thanks for your reply. must i make changes in the > mediaproxy.ini , the mediaproxy.cfg or openser.cfg > file? I had to configure mediaproxy.ini, but I am running mediaproxy on a few different, boxes. You might not if you are only running it local. Can anyone confirm this? > I want to know if my openser.cfg config file have any > problem? > > Have you use openser with the mediaproxy module? If > so, send me your openser.cfg file and tell me how you > make it work. I am currently testing the onsip.org ser.cfg, and it works fine with mediaproxy. If you have not done so you really should read the onsio.org getting started docs. The mediaproxy info was very helpful to me. > Ps: i have some problem with my email > messa(a)innsof.com. This is my alternate e-mail. > > best regards! > > Serge > > > > > > > ___________________________________________________________________________ > Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger > Téléchargez cette version sur http://fr.messenger.yahoo.com >

19 years

[Serusers] Question Compiling acc.so

by Leo Papadopoulos

Dear serusers, I am running ser 0.9.3 I want to enable the accounting package to write to MySQL. I realize I need to recompile to do this. Can I just compile ONLY the acc and somehow install this acc module? If so, how? Is it just easier or better to recompile all of SER? ________________________________ Telecom CTO Leo Papadopoulos 10 Old Stone Court Ridgefield, CT 06877 Tel: 203-438-8117 Cell: 203-788-6364 E-mail: leo(a)telecomCTO.com Web site: www.telecomCTO.com

19 years

[Serusers] Re: NAT Problem and Stun Server

by Elangainesan Shanmugam

Dear serusers, I am running SER 9.4 . it works great. I am running SER outside on public address I am also having small problem behind NAT. To resolv this I am running Stun server - public address with Stun Client - private address ( behind NAT address ) The clients were not able to find its location. But If i do enter Public ip addresss for that system by finding via www.ip2location.com , Both incomming and out going works. The Problem is every time , i have to manually enter the ipaddress. Not sure, if I have to put both Stun server and Stun Client on the public network. And not sure, Stun Client process gives the ip address of the location Please help me Regards Nesan ----- Original Message ----- From: <serusers-request(a)lists.iptel.org> To: <serusers(a)lists.iptel.org> Sent: Sunday, November 13, 2005 5:00 AM Subject: Serusers Digest, Vol 31, Issue 15 > Send Serusers mailing list submissions to > serusers(a)lists.iptel.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.iptel.org/mailman/listinfo/serusers > or, via email, send a message with subject or body 'help' to > serusers-request(a)lists.iptel.org > > You can reach the person managing the list at > serusers-owner(a)lists.iptel.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Serusers digest..." > > > Today's Topics: > > 1. LCR question (Juha Heinanen) > 2. Question Compiling acc.so (Leo Papadopoulos) > 3. Re: NAT Traversal (Thomas Britis) > 4. Multi-domain setup problem (Daryl Sanders) > 5. Re: Question Compiling acc.so (sip) > 6. Re: mediaproxy for incoming (George Lambson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 12 Nov 2005 15:48:01 +0200 > From: Juha Heinanen <jh(a)tutpro.com> > Subject: [Serusers] LCR question > To: Stefan Prelle <s.prelle(a)broadnet.de> > Cc: serusers(a)lists.iptel.org > Message-ID: <17269.62097.141780.968729(a)rautu.tutpro.com> > Content-Type: text/plain; charset=us-ascii > > Stefan Prelle writes: > > > I am having huge performance problems. The OpenSER drops to effectivly > > 1 CPS. My lcr table contains only 20 entries and I have just 2 gateways > > configured, so this shouldn't be a problem. > > currently load_gws() makes a complex mysql query, but only one mysql > query per second seems very slow to me. load_gws could be rewritten > totally in c, but so far nobody has had time to do so. > > -- juha > > > > ------------------------------ > > Message: 2 > Date: Sat, 12 Nov 2005 10:26:34 -0500 > From: "Leo Papadopoulos" <leo(a)telecomcto.com> > Subject: [Serusers] Question Compiling acc.so > To: <serusers(a)lists.iptel.org> > Message-ID: <006201c5e79d$77ea4250$0a01010a@leoathlon> > Content-Type: text/plain; charset="us-ascii" > > Dear serusers, > > I am running ser 0.9.3 > I want to enable the accounting package to write to MySQL. I realize I need > to recompile to do this. > > Can I just compile ONLY the acc and somehow install this acc module? If so, > how? > Is it just easier or better to recompile all of SER? > > ________________________________ > Telecom CTO > Leo Papadopoulos > 10 Old Stone Court > Ridgefield, CT 06877 > Tel: 203-438-8117 > Cell: 203-788-6364 > E-mail: leo(a)telecomCTO.com > Web site: www.telecomCTO.com > > > > > ------------------------------ > > Message: 3 > Date: Sat, 12 Nov 2005 09:36:54 -0200 > From: Thomas Britis <thomas(a)tcnet.com.br> > Subject: Re: [Serusers] NAT Traversal > To: "Greger V. Teigre" <greger(a)teigre.com> > Cc: serusers(a)lists.iptel.org > Message-ID: <4375D3D6.1070805(a)tcnet.com.br> > Content-Type: text/plain; charset=us-ascii; format=flowed > > I tried. Everything goes fine until I change the default configuration > from onsip.org. All the configuration files are basical and needs a lot > of changes to make me happy, heh. > > If anyone has an idea, it would be great. > > Thank you. > > Greger V. Teigre wrote: > > Seems like you could use the Getting Started document from ONsip.org ;-) > > g-) > > ----- Original Message ----- From: "Thomas Britis" <thomas(a)tcnet.com.br> > > To: <serusers(a)lists.iptel.org> > > Sent: Friday, November 11, 2005 5:58 PM > > Subject: [Serusers] NAT Traversal > > > > > >> Hi, > >> > >> I'm working on a popular cenario (I think) of SER's implementation but > >> I'm having some difficult on making clients behind NAT to work well. > >> I tried to use rtpproxy and mediaproxy (not together, of course) but > >> without success. > >> Here is my scenario: SER with public IP address with rtpproxy and/or > >> mediaproxy up and running. Clients are behind NAT with NO firewall > >> blocking any ports. Or even one client behind NAT and other with valid > >> IP (by the way, all clients that are not behind nat works fine). The one > >> behind nat do not receive any voice but can send it. > >> > >> I'm attaching my ser.cfg (both, the rtpproxy and mediaproxy one) and > >> appreciate any help. > >> > >> Thank's in advance. > >> -- > >> Thomas Storino Britis > >> TCNet Informatica e Telecomunicacoes LTDA > >> > > > > > > -------------------------------------------------------------------------- ------ > > > > > > > >> # > >> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > >> # > >> # simple quick-start config script > >> # > >> > >> # ----------- global configuration parameters ------------------------ > >> > >> debug=3 # debug level (cmd line: -dddddddddd) > >> fork=yes > >> log_stderror=no # (cmd line: -E) > >> > >> # TCNet Configuration > >> # hostname matching an alias will satisfy the condition uri==myself. > >> listen="200.167.20.34" > >> alias="e-voip.com.br" > >> alias="200.167.20.34" > >> uid="ser" > >> gid="ser" > >> > >> check_via=no # (cmd. line: -v) > >> dns=no # (cmd. line: -r) > >> rev_dns=no # (cmd. line: -R) > >> port=5060 > >> children=4 > >> fifo="/tmp/ser_fifo" > >> fifo_db_url="mysql://ser:pass@localhost/ser" > >> > >> # Modules > >> loadmodule "/tcnet/ser/lib/ser/modules/domain.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/mysql.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/sl.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/tm.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/rr.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/maxfwd.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/usrloc.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/registrar.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/auth.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/auth_db.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/uri.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/uri_db.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/nathelper.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/mediaproxy.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/textops.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/avpops.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/acc.so" > >> > >> # Modules parameter > >> # auth_db > >> modparam("auth_db|uri_db|usrloc", "db_url", > >> "mysql://ser:pass@localhost/ser") > >> modparam("auth_db", "calculate_ha1", 1) > >> modparam("auth_db", "password_column", "password") > >> > >> # mediaproxy > >> modparam("mediaproxy", "mediaproxy_socket", > >> "/var/run/proxydispatcher.sock") > >> modparam("mediaproxy", "natping_interval", 30) > >> modparam("mediaproxy", "sip_asymmetrics", > >> "/tcnet/mediaproxy/sip-asymmetrics-clients") > >> modparam("mediaproxy", "rtp_asymmetrics", > >> "/tcnet/mediaproxy/rtp-asymmetrics-clients") > >> > >> # usrloc > >> modparam("usrloc", "db_mode", 2) > >> > >> # rr > >> modparam("rr", "enable_full_lr", 1) > >> > >> # registrar > >> modparam("registrar", "nat_flag", 6) > >> > >> # acc > >> modparam("acc", "radius_config", > >> "/usr/local/etc/radiusclient-ng/radiusclient.conf") > >> modparam("acc", "log_level", 1) > >> modparam("acc", "log_flag", 1) > >> modparam("acc", "radius_flag", 1) > >> modparam("acc", "radius_missed_flag", 2) > >> modparam("acc", "log_fmt", "miocfst") > >> modparam("acc", "failed_transactions", 1) > >> > >> # tm > >> modparam("tm", "fr_inv_timer", 27) > >> modparam("tm", "fr_inv_timer_avp", "inv_timeout") > >> > >> # main routing logic > >> route { > >> > >> if (method == "BYE" || method == "CANCEL") { > >> end_media_session(); > >> setflag(1); # accounting > >> setflag(2); # missed call > >> }; > >> > >> # initial sanity checks -- messages with > >> # max_forwards==0, or excessively long requests > >> if (!mf_process_maxfwd_header("10")) { > >> if (method!="ACK") { > >> sl_send_reply("483", "Too Many Hops"); > >> break; > >> }; > >> }; > >> if (msg:len > max_len) { > >> if (method!="ACK") { > >> sl_send_reply("513", "Message too big"); > >> break; > >> }; > >> }; > >> > >> if (method!="REGISTER") { > >> record_route (); > >> }; > >> > >> if (loose_route()) { > >> if (method=="BYE" || method=="CANCEL") { > >> end_media_session(); > >> setflag(1); > >> setflag(2); > >> }; > >> if (method=="INVITE" || method=="ACK") { > >> use_media_proxy(); > >> }; > >> route(1); > >> break; > >> }; > >> > >> if (uri == myself) { > >> if (method == "REGISTER") { > >> if (search("^(Contact|m): > >> .*(a)(200\.167\.20\.34|evoip03\.tcnet\.com\.br|sip\.e-voip\.com\.br)")) { > >> log("LOG: alert: someone trying to set aor==contact\n"); > >> sl_send_reply("476", "No Server Address in Contacts Allowed"); > >> break; > >> }; > >> > >> route(2); # WWW authentication > >> > >> if (!save("location")) { > >> sl_reply_error(); > >> }; > >> break; > >> }; > >> > >> if (method == "INVITE") { > >> route(3); # PROXY authentication > >> if (uri=~"^sip:0") { > >> route(4); # Asterisk > >> }; > >> > >> consume_credentials(); > >> > >> #lookup("location"); > >> if (!lookup("location")) { > >> if (!lookup("aliases")) { > >> if (uri=~"^sip:[3789][0-9]") { > >> prefix("035"); > >> route(4); # Asterisk > >> } else { > >> sl_send_reply ("404", "Not Found"); > >> break; > >> }; > >> }; > >> }; > >> setflag(1); > >> setflag(2); > >> route(1); > >> break; > >> }; > >> }; > >> route(1); > >> } > >> > >> # Fix NATED client on reply route. > >> onreply_route[1] { > >> if (client_nat_test("1") && status=~"(183)|(2[0-9][0-9])") { > >> fix_contact(); > >> }; > >> use_media_proxy (); > >> } > >> > >> # Normal relay > >> route[1] { > >> > >> if (uri =~ "[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")) { > >> sl_send_reply("479", "We don't forward to private IP addresses"); > >> break; > >> }; > >> > >> t_on_reply("1"); > >> t_on_failure("1"); > >> > >> if (!t_relay()) { > >> sl_reply_error(); > >> }; > >> } > >> > >> # WWW authentication > >> route[2] { > >> if (client_nat_test("3")) { > >> setflag(6); > >> force_rport(); > >> fix_contact(); > >> }; > >> > >> sl_send_reply("100", "Trying"); > >> > >> if (!www_authorize("", "subscriber")) { > >> www_challenge("", "0"); > >> break; > >> }; > >> > >> if (!check_to()) { > >> sl_send_reply ("401", "Unauthorized"); > >> break; > >> }; > >> > >> } > >> > >> # PROXY authentication > >> route[3] { > >> if (!proxy_authorize("", "subscriber")) { > >> proxy_challenge("", "0"); > >> break; > >> }; > >> } > >> > >> # Asterisk - E-Voip > >> route[4] { > >> t_on_reply("1"); > >> rewritehost("200.167.20.26"); > >> avp_write("i:45", "inv_timeout"); > >> } > >> > >> failure_route[1] { > >> end_media_session(); > >> } > >> > > > > > > -------------------------------------------------------------------------- ------ > > > > > > > >> # > >> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > >> # > >> # simple quick-start config script > >> # > >> > >> # ----------- global configuration parameters ------------------------ > >> > >> debug=3 # debug level (cmd line: -dddddddddd) > >> fork=yes > >> log_stderror=no # (cmd line: -E) > >> > >> # TCNet Configuration > >> # hostname matching an alias will satisfy the condition uri==myself. > >> listen="200.167.20.34" > >> alias="e-voip.com.br" > >> alias="200.167.20.34" > >> uid="ser" > >> gid="ser" > >> > >> check_via=no # (cmd. line: -v) > >> dns=no # (cmd. line: -r) > >> rev_dns=no # (cmd. line: -R) > >> port=5060 > >> children=4 > >> fifo="/tmp/ser_fifo" > >> fifo_db_url="mysql://ser:pass@localhost/ser" > >> > >> # Modules > >> loadmodule "/tcnet/ser/lib/ser/modules/mysql.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/sl.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/tm.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/rr.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/maxfwd.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/usrloc.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/registrar.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/auth.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/auth_db.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/uri.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/uri_db.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/nathelper.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/textops.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/avpops.so" > >> loadmodule "/tcnet/ser/lib/ser/modules/acc.so" > >> > >> # Modules parameter > >> # auth_db > >> modparam("auth_db|uri_db|usrloc", "db_url", > >> "mysql://ser:pass@localhost/ser") > >> modparam("auth_db", "calculate_ha1", 1) > >> modparam("auth_db", "password_column", "password") > >> > >> # nathelper > >> modparam("nathelper", "natping_interval", 30) > >> modparam("nathelper", "ping_nated_only", 1) > >> modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") > >> > >> # usrloc > >> modparam("usrloc", "db_mode", 2) > >> > >> # rr > >> modparam("rr", "enable_full_lr", 1) > >> > >> # registrar > >> modparam("registrar", "nat_flag", 6) > >> > >> # acc > >> modparam("acc", "radius_config", > >> "/usr/local/etc/radiusclient-ng/radiusclient.conf") > >> modparam("acc", "log_level", 1) > >> modparam("acc", "log_flag", 1) > >> modparam("acc", "radius_flag", 1) > >> modparam("acc", "radius_missed_flag", 2) > >> modparam("acc", "log_fmt", "miocfst") > >> modparam("acc", "failed_transactions", 1) > >> > >> # tm > >> modparam("tm", "fr_inv_timer", 27) > >> modparam("tm", "fr_inv_timer_avp", "inv_timeout") > >> > >> # main routing logic > >> route { > >> > >> if (method == "BYE" || method == "CANCEL") { > >> unforce_rtp_proxy(); > >> setflag(1); # accounting > >> setflag(2); # missed call > >> }; > >> > >> # initial sanity checks -- messages with > >> # max_forwards==0, or excessively long requests > >> if (!mf_process_maxfwd_header("10")) { > >> sl_send_reply("483", "Too Many Hops"); > >> break; > >> }; > >> if (msg:len > max_len) { > >> sl_send_reply("513", "Message too big"); > >> break; > >> }; > >> > >> if (method!="REGISTER") { > >> record_route (); > >> }; > >> > >> if (loose_route()) { > >> if (method == "BYE") { > >> setflag(1); > >> setflag(2); > >> unforce_rtp_proxy(); > >> }; > >> route(1); > >> break; > >> }; > >> > >> if (uri == myself) { > >> if (method=="INVITE") { > >> fix_nated_sdp ("1"); > >> }; > >> > >> if (method == "REGISTER") { > >> if (search("^(Contact|m): > >> .*(a)(200\.167\.20\.34|evoip03\.tcnet\.com\.br|sip\.e-voip\.com\.br)")) { > >> log("LOG: alert: someone trying to set aor==contact\n"); > >> sl_send_reply("476", "No Server Address in Contacts Allowed"); > >> break; > >> }; > >> > >> route(2); # WWW authentication > >> > >> if (!save("location")) { > >> sl_reply_error(); > >> }; > >> break; > >> }; > >> > >> if (method == "INVITE") { > >> route(3); # PROXY authentication > >> if (uri=~"^sip:0") { > >> route(4); # Asterisk > >> }; > >> > >> consume_credentials(); > >> > >> #lookup("location"); > >> if (!lookup("location")) { > >> if (!lookup("aliases")) { > >> if (uri=~"^sip:[3789][0-9]") { > >> prefix("035"); > >> route(4); # Asterisk > >> } else { > >> sl_send_reply ("404", "Not Found"); > >> break; > >> }; > >> }; > >> }; > >> setflag(1); > >> setflag(2); > >> route(1); > >> break; > >> }; > >> }; > >> route(1); > >> } > >> > >> # Fix NATED client on reply route. > >> onreply_route[1] { > >> if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { > >> if (!search("Content-Length:[ ]*0")) { > >> force_rtp_proxy(); > >> }; > >> }; > >> } > >> > >> # Normal relay > >> route[1] { > >> > >> if (uri =~ "[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")) { > >> sl_send_reply("479", "We don't forward to private IP addresses"); > >> break; > >> }; > >> > >> t_on_reply("1"); > >> > >> if (isflagset(6) || isflagset(5)) { > >> log (1, "oi"); > >> force_rtp_proxy (); > >> }; > >> > >> if (!t_relay()) { > >> sl_reply_error(); > >> }; > >> } > >> > >> # WWW authentication > >> route[2] { > >> if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { > >> setflag(6); > >> fix_nated_register(); > >> force_rport(); > >> }; > >> > >> sl_send_reply("100", "Trying"); > >> > >> if (!www_authorize("", "subscriber")) { > >> www_challenge("", "0"); > >> break; > >> }; > >> > >> if (!check_to()) { > >> sl_send_reply ("401", "Unauthorized"); > >> break; > >> }; > >> > >> if (isflagset(5)) { > >> setflag(6); > >> }; > >> } > >> > >> # PROXY authentication > >> route[3] { > >> if (nat_uac_test("19")) { > >> setflag(6); > >> }; > >> > >> if (!proxy_authorize("", "subscriber")) { > >> proxy_challenge("", "0"); > >> break; > >> }; > >> } > >> > >> # Asterisk - E-Voip > >> route[4] { > >> if (isflagset(6)) { > >> force_rport(); > >> fix_nated_contact(); > >> force_rtp_proxy(); > >> }; > >> > >> t_on_reply("1"); > >> rewritehost("200.167.20.26"); > >> avp_write("i:45", "inv_timeout"); > >> } > >> > > > > > > -------------------------------------------------------------------------- ------ > > > > > > > >> _______________________________________________ > >> Serusers mailing list > >> serusers(a)lists.iptel.org > >> http://lists.iptel.org/mailman/listinfo/serusers > >> > > > > > > > > -- > Thomas Storino Britis > TCNet Informatica e Telecomunicacoes LTDA > > > > ------------------------------ > > Message: 4 > Date: Sat, 12 Nov 2005 14:59:01 -0700 > From: Daryl Sanders <daryl.sanders(a)gmail.com> > Subject: [Serusers] Multi-domain setup problem > To: users(a)openser.org, SER Users <serusers(a)lists.iptel.org> > Message-ID: > <cffd7ecd0511121359l3d7a135ev84f81087534e3a84(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi Everyone, > > I just added a second domain to my openser box and screwed things up somehow. > Maybe someone can help figure out what's going on. > I'm using the new onsip config (unmodified except IPs & replacing > breaks w/returns). > I'm using mediaproxy for NAT. Everything worked properly prior to > adding the new domain. > I did add the new domain to the domain table, and have loaded the > domain module with modparams as follows. > > modparam("domain", "db_url", "mysql://openser:mypass@myhost/openser") > modparam("domain", "db_mode", 1) > modparam("domain", "domain_table", "domain") > modparam("domain", "domain_col", "domain") > > Existing domain: sip1.mydomain.com > New domain: sip1.mydomain.com > > user1: X-Lite (behind NAT) > private-IP (192.168.x.x) > Registers using domain sip1.mydomain.com > > user2: Linksys PAP2-NA > public-IP (same subnet as Utsarcom) > Registers using domain sip1.mydomain.com > > user3: Utstarcom iAN-02EX > public-IP (63.225.x.x) > Registers using domain sip2.mydomain.com > > Here is what happens now... > > - All users can register fine. > - user1 & user2 can only receives calls from user3 (can't call others > or pstn , 407 Proxy Auth Required) > - user3 is the only one who can call others (calls to user1,user2, & > pstn are fine) > > It's probably just something simple I missed, but I can't seem to > figure it out. As always, thanks for your assistance. > > - Daryl > > > > ------------------------------ > > Message: 5 > Date: Sat, 12 Nov 2005 17:02:34 -0500 > From: "sip" <sip(a)arcdiv.com> > Subject: Re: [Serusers] Question Compiling acc.so > To: "Leo Papadopoulos" <leo(a)telecomcto.com>, <serusers(a)lists.iptel.org> > Message-ID: <20051112215625.M80825(a)infinideas.com> > Content-Type: text/plain; charset=iso-8859-1 > > It's actually pretty easy to just recompile/install a module at a time. The > recompilation part is in the docs (INSTALL file). > > Basically, from the root directory of your source code... > > make modules=modules/acc modules > > That would recompile the acc module. My recommendation, however, is to go > INTO the src/modules/acc directoy and do a make clean (it will whine about how > you should run this from the root directory, but ignore that -- that's just a > stock message and doesn't pertain to make cleans). THEN recompile the module > from the root of the src tree to make sure any stale object files are no > longer lying about mucking up your recompile. > > Once it's been compiled, stop ser (important step), and just copy the > resulting .so (which will be in the modules/acc directory) file into the > /usr/local/lib/ser/modules directory and you're good to go. > > Restart ser and watch for weird error messages in the log. :) > > STOPPING ser is very important if you're replacing one of its modules, or it > will panic, die, and leave a bunch of core files sitting in your / tree. > Always messy. > > N. > > > On Sat, 12 Nov 2005 10:26:34 -0500, Leo Papadopoulos wrote > > Dear serusers, > > > > I am running ser 0.9.3 > > I want to enable the accounting package to write to MySQL. I realize > > I need to recompile to do this. > > > > Can I just compile ONLY the acc and somehow install this acc module? > > If so, how? Is it just easier or better to recompile all of SER? > > > > ________________________________ > > Telecom CTO > > Leo Papadopoulos > > 10 Old Stone Court > > Ridgefield, CT 06877 > > Tel: 203-438-8117 > > Cell: 203-788-6364 > > E-mail: leo(a)telecomCTO.com > > Web site: www.telecomCTO.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > ------------------------------ > > Message: 6 > Date: Sat, 12 Nov 2005 17:50:37 -0700 > From: George Lambson <LambsonGE(a)mtc.byu.edu> > Subject: Re: [Serusers] mediaproxy for incoming > To: greger(a)teigre.com > Cc: serusers(a)lists.iptel.org > Message-ID: <s3762bd8.008(a)mtcemail.mtc.byu.edu> > Content-Type: text/plain; charset=US-ASCII > > Any idea what I might be doing wrong? > > I have had some issues with setting up the served domain. I use x-lite for my SIP UAs and have to put the host name of my SER server to get them to log in, even though I set the environment variable for the SIP domain of the server to my domain. Do you think that it might be related? > > Thanks, > George > > >>> "Greger V. Teigre" <greger(a)teigre.com> 11/11/2005 12:19:59 AM >>> > I believe the standard NAT traversal configs from onsip.org should handle > that. > g-) > ----- Original Message ----- > From: "George Lambson" <LambsonGE(a)mtc.byu.edu> > To: <serusers(a)lists.iptel.org> > Sent: Friday, November 11, 2005 12:51 AM > Subject: [Serusers] mediaproxy for incoming > > > > Is anyone using mediaproxy for INCOMING calls? > > > > What I mean is: is SER capable of accepting INVITE messages from an > > unregistered UA that is behind a NAT Firewall and connecting them with a > > registered UA? > > > > I would like to be able to receive incoming calls for my domain from > > anyone on the internet and connect them to the proper user. Please tell me > > anyone if you are successfully doing this. > > > > Thanks, > > George > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > > ------------------------------ > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > > End of Serusers Digest, Vol 31, Issue 15 > **************************************** >

19 years

Re: [Serusers] mediaproxy for incoming

by George Lambson

Any idea what I might be doing wrong? I have had some issues with setting up the served domain. I use x-lite for my SIP UAs and have to put the host name of my SER server to get them to log in, even though I set the environment variable for the SIP domain of the server to my domain. Do you think that it might be related? Thanks, George >>> "Greger V. Teigre" <greger(a)teigre.com> 11/11/2005 12:19:59 AM >>> I believe the standard NAT traversal configs from onsip.org should handle that. g-) ----- Original Message ----- From: "George Lambson" <LambsonGE(a)mtc.byu.edu> To: <serusers(a)lists.iptel.org> Sent: Friday, November 11, 2005 12:51 AM Subject: [Serusers] mediaproxy for incoming > Is anyone using mediaproxy for INCOMING calls? > > What I mean is: is SER capable of accepting INVITE messages from an > unregistered UA that is behind a NAT Firewall and connecting them with a > registered UA? > > I would like to be able to receive incoming calls for my domain from > anyone on the internet and connect them to the proper user. Please tell me > anyone if you are successfully doing this. > > Thanks, > George > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

19 years

← Newer
1
...
34
35
36
37
38
39
40
...
57
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2005