sr-users April 2005

sr-users@lists.kamailio.org

250 participants
697 discussions

[Serusers] how to check if number is busy or not responding then forword it to asterisk
by Kamran Ahmad 06 Apr '05

06 Apr '05

hello thanks Greger V. Teigre. my question is there any way to check wheather UAS is busy or not responding then forword it to other asterisk proxy server for callforword,confrence or PSTN according to dialplan(extension.conf). if (uri=~"^sip:*") { forward( 192.168.0.11, 5060 ); //where asterisk is listening break; } Thanks Kamran __________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo

3 2

[Serusers] Registering with sipphone
by Erdem HAKI 06 Apr '05

06 Apr '05

Hello, I have a problem about registration and online/offline status. 1. I open the SIPphone first, it log in and i can make a call (my status online) several times. One hour later i check it but my status is still online and it's never be offline. 2. Although I do nothing about configuration, several hours later, when i try to make a call SIPphone can't log in again . So i check SIPphone Diagnostics(shown below). any idea, what could be the problem.? RECEIVE TIME: 9275247 RECEIVE << 192.168.3.151:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 192.168.3.152:5060;rport=5060;branch=z9hG4bKFEF502CD31E84C4E94F4CDC0D0FDD367 From: 8877 <sip:8877@test.com>;tag=4270805189 To: 8877 <sip:8877@test.com>;tag=b27e1a1d33761e85846fc98f5f3a7e58.d43e Call-ID: BD0C1974B3A84098AA64B66B7EA218AF(a)test.com CSeq: 29697 REGISTER WWW-Authenticate: Digest realm="test.com", nonce="42539e90509011eb128ee451b0e8675d36c52a20" Server: Sip EXpress router (0.8.11 (i386/linux)) Content-Length: 0 Warning: 392 192.168.3.151:5060 "Noisy feedback tells: pid=4024 req_src_ip=192.168.3.152 req_src_port=5060 in_uri=sip:test.com out_uri=sip:test.com via_cnt==1"

1 0

[Serusers] How to change the calling number
by Mac 06 Apr '05

06 Apr '05

Hello, I am trying to change the calling number string on SER. To be more precisely: i need to have a possibility to freely change the contents xxxxxxxx of the following line From: "abababa" <sip:xxxxxxxx@10.10.10.10:29577>. Could you tell me if it is possible to obtain this goal or point me somewere i can get an answer. Thanks a lot, Mac.

4 6

Re: [Serusers] Re: ser+radius
by Kamran Ahmad 06 Apr '05

06 Apr '05

hello what is the meaning of "auth_radius: can't get code for the Digest-Response attribute". why he is saying like this this is the error log 0(11984) DEBUG: init_mod: auth_radius 0(11984) auth_radius - Initializing 0(11984) auth_radius: No `Cisco' vendor in Radius dictionary 0(11984) find_export: found <pre_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(11984) find_export: found <post_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(11984) ERROR: auth_radius: can't get code for the Digest-Response attribute 0(11984) init_mod(): Error while initializing module auth_radius ERROR: error while initializing modules 0(11984) DEBUG: tm_shutdown : start 0(11984) DEBUG: tm_shutdown : empting DELETE list 0(11984) DEBUG: tm_shutdown : empting hash table 0(11984) DEBUG: tm_shutdown: releasing timers 0(11984) DEBUG: tm_shutdown : removing semaphores 0(11984) DEBUG: tm_shutdown : done 0(11984) shm_mem_destroy 0(11984) destroying the shared memory lock --- "Greger V. Teigre" <greger(a)teigre.com> wrote: > I believe this line says it all: > libradiusclient.so.2: cannot open shared object > file: > No such file or directory > Do: slocate libradiusclient.so > The path of its location should be in your > LD_LIBRARY_PATH > g-) > > Kamran Ahmad wrote: > > hello > > > > can any one tell why i am getting this error > > i am using freeradius and radiusclient-0.4.8 with > > SER-0.8.14. > > > > when i am tring to load > > loadmodule > "/usr/local/lib/ser/modules/auth_radius.so" > > or > > loadmodule "/usr/local/lib/ser/modules/acc.so" > > > > i am getting this error any help > > > > [ser-0.8.14]# ser start > > 0(8165) loading module > > /usr/local/lib/ser/modules/sl.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/tm.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/rr.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/maxfwd.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/usrloc.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/registrar.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/auth_radius.so > > 0(8165) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/auth_radius.so>: > > libradiusclient.so.2: cannot open shared object > file: > > No such file or directory > > 0(8165) parse error (41,13-55): failed to load > module > > 0(8165) find_export: found > <mf_process_maxfwd_header> > > in module maxfwd_module > > [/usr/local/lib/ser/modules/maxfwd.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <record_route> in > module > > rr [/usr/local/lib/ser/modules/rr.so] > > 0(8165) find_export: found <loose_route> in module > rr > > [/usr/local/lib/ser/modules/rr.so] > > 0(8165) find_export: found <t_relay> in module tm > > [/usr/local/lib/ser/modules/tm.so] > > 0(8165) find_export: found <save> in module > registrar > > [/usr/local/lib/ser/modules/registrar.so] > > 0(8165) find_export: found <lookup> in module > > registrar > [/usr/local/lib/ser/modules/registrar.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <t_relay> in module tm > > [/usr/local/lib/ser/modules/tm.so] > > 0(8165) find_export: found <sl_reply_error> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > ERROR: bad config file (1 errors) > > 0(8165) DEBUG: tm_shutdown : start > > 0(8165) DEBUG: tm_shutdown : empting hash table > > 0(8165) DEBUG: tm_shutdown: releasing timers > > 0(8165) DEBUG: tm_shutdown : removing semaphores > > 0(8165) DEBUG: tm_shutdown : done > > 0(8165) shm_mem_destroy > > 0(8165) destroying the shared memory lock > > > > > > > > __________________________________ > > Yahoo! Messenger > > Show us what our next emoticon should look like. > Join the fun. > > > http://www.advision.webevents.yahoo.com/emoticontest > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > __________________________________ Yahoo! Messenger Show us what our next emoticon should look like. Join the fun. http://www.advision.webevents.yahoo.com/emoticontest

2 1

Re: [Serusers] Re: ser+radius
by Kamran Ahmad 06 Apr '05

06 Apr '05

thanks for replying now i am started with ser but when i am trying to register to ser it is saying. i m getting it even if it try to load only my auth_radius.so ------------------------------------------------------ loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/auth.so" route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } ------------------------------------------------------- WARNING: no fork mode and more than one listen address found (will use only the the first one) 0(9844) DEBUG: init_mod: sl_module stateless - initializing 0(9844) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(9844) DEBUG: MD5 calculated: b27e1a1d33761e85846fc98f5f3a7e58 0(9844) DEBUG: init_mod: tm 0(9844) TM - initializing... 0(9844) Call-ID initialization: '7fbf6bb7' 0(9844) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(9844) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(9844) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(9844) DEBUG: lock_initialize: lock initialization started 0(9844) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(9844) DEBUG: MD5 calculated: 533cb9e91f4b999cf76861cbb9ed54ed 0(9844) DEBUG: MD5 calculated: a6a1c5f60faecf035a1ae5b6e96e979a 0(9844) DEBUG: init_mod: rr 0(9844) rr - initializing 0(9844) DEBUG: init_mod: maxfwd_module Maxfwd module- initializing 0(9844) DEBUG: init_mod: usrloc 0(9844) usrloc - initializing 0(9844) DEBUG: register_fifo_cmd: new command (ul_stats) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_rm) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_dump) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_flush) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_add) registered 0(9844) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered 0(9844) DEBUG: init_mod: registrar 0(9844) registrar - initializing 0(9844) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(9844) find_export: found <ul_bind_usrloc> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_register_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_get_all_ucontacts> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_insert_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_delete_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_get_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_lock_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_unlock_udomain> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_release_urecord> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_insert_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_delete_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_get_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) find_export: found <ul_update_ucontact> in module usrloc [/usr/local/lib/ser/modules/usrloc.so] 0(9844) DEBUG: init_mod: auth_radius 0(9844) auth_radius - Initializing 0(9844) auth_radius: No `Cisco' vendor in Radius dictionary 0(9844) find_export: found <pre_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(9844) find_export: found <post_auth> in module auth [/usr/local/lib/ser/modules/auth.so] 0(9844) ERROR: auth_radius: can't get code for the Digest-Response attribute 0(9844) init_mod(): Error while initializing module auth_radius ERROR: error while initializing modules 0(9844) DEBUG: tm_shutdown : start 0(9844) DEBUG: tm_shutdown : empting DELETE list 0(9844) DEBUG: tm_shutdown : empting hash table 0(9844) DEBUG: tm_shutdown: releasing timers 0(9844) DEBUG: tm_shutdown : removing semaphores 0(9844) DEBUG: tm_shutdown : done 0(9844) shm_mem_destroy 0(9844) destroying the shared memory lock --- "Greger V. Teigre" <greger(a)teigre.com> wrote: > I believe this line says it all: > libradiusclient.so.2: cannot open shared object > file: > No such file or directory > Do: slocate libradiusclient.so > The path of its location should be in your > LD_LIBRARY_PATH > g-) > > Kamran Ahmad wrote: > > hello > > > > can any one tell why i am getting this error > > i am using freeradius and radiusclient-0.4.8 with > > SER-0.8.14. > > > > when i am tring to load > > loadmodule > "/usr/local/lib/ser/modules/auth_radius.so" > > or > > loadmodule "/usr/local/lib/ser/modules/acc.so" > > > > i am getting this error any help > > > > [ser-0.8.14]# ser start > > 0(8165) loading module > > /usr/local/lib/ser/modules/sl.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/tm.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/rr.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/maxfwd.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/usrloc.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/registrar.so > > 0(8165) loading module > > /usr/local/lib/ser/modules/auth_radius.so > > 0(8165) ERROR: load_module: could not open module > > </usr/local/lib/ser/modules/auth_radius.so>: > > libradiusclient.so.2: cannot open shared object > file: > > No such file or directory > > 0(8165) parse error (41,13-55): failed to load > module > > 0(8165) find_export: found > <mf_process_maxfwd_header> > > in module maxfwd_module > > [/usr/local/lib/ser/modules/maxfwd.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <record_route> in > module > > rr [/usr/local/lib/ser/modules/rr.so] > > 0(8165) find_export: found <loose_route> in module > rr > > [/usr/local/lib/ser/modules/rr.so] > > 0(8165) find_export: found <t_relay> in module tm > > [/usr/local/lib/ser/modules/tm.so] > > 0(8165) find_export: found <save> in module > registrar > > [/usr/local/lib/ser/modules/registrar.so] > > 0(8165) find_export: found <lookup> in module > > registrar > [/usr/local/lib/ser/modules/registrar.so] > > 0(8165) find_export: found <sl_send_reply> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > 0(8165) find_export: found <t_relay> in module tm > > [/usr/local/lib/ser/modules/tm.so] > > 0(8165) find_export: found <sl_reply_error> in > module > > sl_module [/usr/local/lib/ser/modules/sl.so] > > ERROR: bad config file (1 errors) > > 0(8165) DEBUG: tm_shutdown : start > > 0(8165) DEBUG: tm_shutdown : empting hash table > > 0(8165) DEBUG: tm_shutdown: releasing timers > > 0(8165) DEBUG: tm_shutdown : removing semaphores > > 0(8165) DEBUG: tm_shutdown : done > > 0(8165) shm_mem_destroy > > 0(8165) destroying the shared memory lock > > > > > > > > __________________________________ > > Yahoo! Messenger > > Show us what our next emoticon should look like. > Join the fun. > > > http://www.advision.webevents.yahoo.com/emoticontest > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > __________________________________ Yahoo! Messenger Show us what our next emoticon should look like. Join the fun. http://www.advision.webevents.yahoo.com/emoticontest

1 0

[Serusers] Re: ser+radius
by Kamran Ahmad 06 Apr '05

06 Apr '05

hello can any one tell why i am getting this error i am using freeradius and radiusclient-0.4.8 with SER-0.8.14. when i am tring to load loadmodule "/usr/local/lib/ser/modules/auth_radius.so" or loadmodule "/usr/local/lib/ser/modules/acc.so" i am getting this error any help [ser-0.8.14]# ser start 0(8165) loading module /usr/local/lib/ser/modules/sl.so 0(8165) loading module /usr/local/lib/ser/modules/tm.so 0(8165) loading module /usr/local/lib/ser/modules/rr.so 0(8165) loading module /usr/local/lib/ser/modules/maxfwd.so 0(8165) loading module /usr/local/lib/ser/modules/usrloc.so 0(8165) loading module /usr/local/lib/ser/modules/registrar.so 0(8165) loading module /usr/local/lib/ser/modules/auth_radius.so 0(8165) ERROR: load_module: could not open module </usr/local/lib/ser/modules/auth_radius.so>: libradiusclient.so.2: cannot open shared object file: No such file or directory 0(8165) parse error (41,13-55): failed to load module 0(8165) find_export: found <mf_process_maxfwd_header> in module maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so] 0(8165) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(8165) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(8165) find_export: found <record_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(8165) find_export: found <loose_route> in module rr [/usr/local/lib/ser/modules/rr.so] 0(8165) find_export: found <t_relay> in module tm [/usr/local/lib/ser/modules/tm.so] 0(8165) find_export: found <save> in module registrar [/usr/local/lib/ser/modules/registrar.so] 0(8165) find_export: found <lookup> in module registrar [/usr/local/lib/ser/modules/registrar.so] 0(8165) find_export: found <sl_send_reply> in module sl_module [/usr/local/lib/ser/modules/sl.so] 0(8165) find_export: found <t_relay> in module tm [/usr/local/lib/ser/modules/tm.so] 0(8165) find_export: found <sl_reply_error> in module sl_module [/usr/local/lib/ser/modules/sl.so] ERROR: bad config file (1 errors) 0(8165) DEBUG: tm_shutdown : start 0(8165) DEBUG: tm_shutdown : empting hash table 0(8165) DEBUG: tm_shutdown: releasing timers 0(8165) DEBUG: tm_shutdown : removing semaphores 0(8165) DEBUG: tm_shutdown : done 0(8165) shm_mem_destroy 0(8165) destroying the shared memory lock __________________________________ Yahoo! Messenger Show us what our next emoticon should look like. Join the fun. http://www.advision.webevents.yahoo.com/emoticontest

2 1

[Serusers] recording and sniffing voip
by Iqbal 06 Apr '05

06 Apr '05

Hi Anyone tried Voipong ---- VoIPong is a utility which detects all Voice Over IP calls on a pipeline, and for those which are G711 encoded, dumps actual conversation to seperate wave files. It supports SIP, H323, Cisco's Skinny Client Protocol, RTP and RTCP --------- Iqbal

2 3

FW: Re: [Serusers] SER 0.8.14 to 0.9.0
by Aisling O'Driscoll 06 Apr '05

06 Apr '05

Hi Greger, That didn't work unfortunately and there are no error messages in var log. I typed "which ser" and saw /usr/local/sbin/ser. I realise this is not correct so in /etc/profile I changed this to : PATH="$PATH:/opt/ser/sbin:." However that didn't make much of a difference. I did rm ser.pid again from the var/run directory and now repeatedly get the error: Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed. Do you think this is again something got to do with other versions? Thanks Aisling. > >---- Original Message ---- >From: greger(a)teigre.com >To: ashling.odriscoll(a)cit.ie >Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >Date: Tue, 5 Apr 2005 14:16:05 +0200 > >>Deleting /var/run/ser.pid is quite ok when ser is not running. >Maybe you >>have a leftover ser process. kill it (kill -9 if it still persists). > Then >>start ser: serctl start. >>Check /var/log/messages for error messages. >>g-) >> >>Aisling O'Driscoll wrote: >>> Greger, >>> >>> I followed the instructions in your previous emails and everything >>> worked like a charm for the first few times. However now when I >>> attempt to start SER (/opt/ser/sbin/serctl start). I get the >followng >>> error: >>> >>> Starting SER : PID file exists! (/var/run/ser.pid) already >running? >>> >>> I had already killed all ser processes (killall ser)before I >executed >>> this command so I dont understand why this happened. I then >removed >>> ser.pid i.e. cd /var/run, rm ser.pid. When I restarted again it >said >>> ser had restarted but when i typed pstree, I could only see one >ser >>> process (theres normally 27) and when i ran netstat -tunap I >couldnt >>> see ser listening on any port. >>> >>> Regards, >>> Aisling. >>>> >>>> ---- Original Message ---- >>>> From: greger(a)teigre.com >>>> To: ashling.odriscoll(a)cit.ie >>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>> Date: Mon, 4 Apr 2005 13:01:48 +0200 >>>> >>>>> Well, difficult to know what's wrong. If you use the ONsip.org >>>> package and >>>>> follow the description I wrote in my last email, cpl-c.so should >be >>>>> installed correctly. >>>>> g-) >>>>> >>>>> Aisling O'Driscoll wrote: >>>>>> Thanks for that Greger. I have SER working now anyway (at last >;)) >>>>>> and when I run ser -V I can see that 0.9.1 is running. I have >to >>>>>> start ser using "ser -d -E". Now I want to get cpl-c.so >working. I >>>> am >>>>>> trying to follow the "SER CPL Howto" document but that seems to >>>>>> assume that cpl-c.so will be in /usr/local/lib/ser/modules and >>>> just >>>>>> needs to be patched. However there is no cpl-c.so module in >that >>>>>> directory. I have edited the makefile so the module isnt >excluded >>>> but >>>>>> that has made a difference. >>>>>> >>>>>> Any ideas? >>>>>> Thanks very much for your help so far. >>>>>> Aisling. >>>>>>> >>>>>>> ---- Original Message ---- >>>>>>> From: greger(a)teigre.com >>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>> Date: Mon, 4 Apr 2005 10:48:59 +0200 >>>>>>> >>>>>>>> Aisling, >>>>>>>> Sorry, I overlooked this post. >>>>>>>> >>>>>>>> For installation from scratch, do the following as root: >>>>>>>> Make sure /opt exists, if not: mkdir /opt >>>>>>>> Delete your mysql ser database: mysqladmin -u root >[-ppassword] >>>>>>>> drop ser (I assume you don't need data in the old) >>>>>>>> unzip the source file to /tmp >>>>>>>> cd /tmp/ser-0.9.0 >>>>>>>> Run: ./make_and_install sql /opt/ser >>>>>>>> Ser will be installed to /opt/ser. >>>>>>>> Copy the config file to /opt/ser/etc/ser/ >>>>>>>> Create tables with /opt/ser/sbin/ser_mysql.sh create >>>>>>>> Verify that you have the correct ser: /opt/ser/sbin/ser -V >>>>>>>> >>>>>>>> Start ser with /opt/ser/sbin/serctl start >>>>>>>> >>>>>>>> Verify that ser is running: ps -ax | grep ser >>>>>>>> and check /var/log/messages >>>>>>>> >>>>>>>> If you still have problems, start ser this way: >>>>>>>> /opt/ser/sbin/ser -d -d -d -d -d -d -d -E -D >>>>>>>> >>>>>>>> Post the output. >>>>>>>> >>>>>>>> g-) >>>>>>>> >>>>>>>> Aisling O'Driscoll wrote: >>>>>>>>> I installed the following from the onsip site. I did "tar >-zxvf >>>>>>>>> ser-0.9.etcetc" in the /usr/local directory and then ran the >>>>>>> scripts. >>>>>>>>> Do I start ser now by doing /usr/local/sbin/serctl start. I >am >>>>>>> still >>>>>>>>> getting the error /var/run/ser.pid does not exist when I do >>>> that. >>>>>>>>> >>>>>>>>> Could someone let me know a command how to delete all ser >files >>>>>>> from >>>>>>>>> my computer and then confirm that I should unzip the ser >0.9.0 >>>>>>> source >>>>>>>>> file in the /usr/local directory. >>>>>>>>> >>>>>>>>> Thanks a million, >>>>>>>>> Aisling. >>>>>>>>> >>>>>>>>>> ---- Original Message ---- >>>>>>>>>> From: greger(a)teigre.com >>>>>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>> Date: Wed, 30 Mar 2005 07:46:06 +0200 >>>>>>>>>> >>>>>>>>>>> Aisling, >>>>>>>>>>> >>>>>>>>>>> We have now also posted a complete 0.9.0 source package on >>>>>>>>>>> http://www.onsip.org/. It comes with a simple script that >>>>>>>>>>> will compile and install most of the modules (including >cpl) >>>>>>>>>>> either to the default directory /usr/local/*/ser or to a >>>>>>>>>>> directory of your choice. The package was created as a >part >>>>>>>>>>> of the "Getting Started" effort to support speedy upstart >of >>>>>>>>>>> a full SER installation. >>>>>>>>>>> >>>>>>>>>>> Regards, >>>>>>>>>>> Greger >>>>>>>>>>> >>>>>>>>>>> Java Rockx wrote: >>>>>>>>>>>> Great. Now you need to compile the mysql support module. >>>>>>>>>>>> >>>>>>>>>>>> You can get a full how-to at http://www.onsip.org >>>>>>>>>>>> >>>>>>>>>>>> Just register and download the "Getting Started" >document. >>>>>>>>>>>> This should be enough to get your using the mysql module. >>>>>>>>>>>> >>>>>>>>>>>> As for cpl but I suspect that it simply isn't complied by >>>>>>> default. >>>>>>>>>>>> >>>>>>>>>>>> You can compile it by changing to your ser source >directory >>>>>>>>>>>> and doing this: >>>>>>>>>>>> >>>>>>>>>>>> make exclude_modules="" modules >>>>>>>>>>>> >>>>>>>>>>>> Then copy the <ser-source>/modules/cpl-c/*.so to >>>>>>>>>>>> /usr/loca/lib/ser/modules >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> Paul >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tue, 29 Mar 2005 17:34:38 +0100, Aisling O'Driscoll >>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>> I have deleted all the "modules" directories from my >system >>>>>>> other >>>>>>>>>>>>> than /usr/local/lib/ser. However /usr/local/lib/ser >doesnt >>>>>>>>>> contain >>>>>>>>>>>>> modules such as mysql.so, cpl-c.so etc. Is this normal?? >If >>>>>>>>>>>>> it is then what how do I check these modules out cvs?. I >>>>>>>>>>>>> have >>>>>>>>>> downloaded >>>>>>>>>>>>> the latest SER source code and made the SER binaries 2 >more >>>>>>> times >>>>>>>>>>>>> (according the onsip document) to make sure I running >the >>>> most >>>>>>>>>>>>> up-to-date code. >>>>>>>>>>>>> >>>>>>>>>>>>> I apologise for lack of linx knowledge and very much >>>>>>>>>>>>> appreciate the help I have been given so far. >>>>>>>>>>>>> >>>>>>>>>>>>> Aisling. >>>>>>>>>>>>>> >>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>> From: javarockx(a)gmail.com >>>>>>>>>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 10:19:52 -0500 >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Again, this sounds like you've got more than one >version >>>>>>>>>>>>>>> of ser on your system. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I don't know where 0.8.14 kept it's modules but you >can >>>> find >>>>>>>>>>>>>>> other ser modules (and remove them). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> to find them do this as root >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> find / -name mysql.so >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> you may find more than ser modules with this but it >>>> should >>>>>>>>>>>>>>> spit out the directory that 0.8.14 used. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ser-0.9 keeps its modules in /usr/local/lib/ser >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tue, 29 Mar 2005 15:53:56 +0100, Aisling O'Driscoll >>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>> Yes that was it. Thanks. I promise I'm nearly there!I >>>>>>>>>>>>>>>> replaced the default script with the ser.cfg I was >>>> running >>>>>>>>>>>>>>>> with 0.8.14. I am getting two mismatch errors with >the >>>>>>>>>>>>>>>> script though: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ERROR: module version mismatch for >>>>>>>>>>>>>>>> /usr/local/lib/ser/modules/mysql.so; core: ser 0.9.1 >>>>>>>>>> (i386/linux); >>>>>>>>>>>>>>>> module ser 0.9.0 (i386/linux). >>>>>>>>>>>>>>>> Its the same for the cpl module. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Can I run a command to update the modules only? Also >I'm >>>>>>>>>>>>>>>> a bit confused if the mysql database that I was using >>>>>>>>>>>>>>>> with >>>> 0.8.14 >>>>>>>>>>>>>>>> is still valid? Do I have create new tables >>>> (ser_mysql.sh >>>>>>>>>>>>>>>> create etc)is the current database sufficient? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Many thanks, >>>>>>>>>>>>>>>> Aisling. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>>>>> From: greger(a)teigre.com >>>>>>>>>>>>>>>>> To: javarockx(a)gmail.com, ashling.odriscoll(a)cit.ie, >>>>>>>>>>>>>> serusers(a)iptel.org >>>>>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 16:29:49 +0200 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This is the default ser.cfg problem: Remove the >>>>>>>>>>>>>>>>>> force_send_socket line with reference to the smaug >>>>>>> server. >>>>>>>>>>>>>>>>>> I thought this was changed in CVS (a test cfg file >was >>>>>>>>>>>>>>>>>> committed to cvs in an error). >>>>>>>>>>>>>>>>>> g-) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Java Rockx wrote: >>>>>>>>>>>>>>>>>>> your ser.cfg is in /usr/local/etc/ser >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I've not seen your ser.cfg file - so I can't >really >>>> say. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Tue, 29 Mar 2005 15:10:30 +0100, Aisling >>>> O'Driscoll >>>>>>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>>>>>> Thanks,I've made that change. Any idea about why >SER >>>>>>> wont >>>>>>>>>>>>>>>>>>>> start? The following error is in >/varlog/messages: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> /usr/local/sbin/ser[7966]: ERROR: fix_actions: >>>>>>>>>>>>>> force_send_socket: >>>>>>>>>>>>>>>>>>>> could not resolvbe smaug. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Also where is my new ser.cfg stored. My old one >is >>>>>>>>>>>>>>>>>>>> in etc/ser. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>> Aisling >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>>>>>>>> From: javarockx(a)gmail.com >>>>>>>>>>>>>>>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>>>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 09:08:24 -0500 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> your PATH should actually be >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> PATH=$PATH:/usr/local/sbin:. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tue, 29 Mar 2005 14:36:56 +0100, Aisling >>>> O'Driscoll >>>>>>>>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>>>>>>>> Thanks for the replies so far - Everyone has >been >>>>>>> very >>>>>>>>>>>>>>>>>>>>>> helpful. I have one final question. I deleted >the >>>>>>> "ser" >>>>>>>>>>>>>>>>>>>>>> directory from >>>>>>>>>>>>>>>>>>>>> /usr/sbin >>>>>>>>>>>>>>>>>>>>>> as suggested. I am using Suse Linux 9.0 so then >I >>>>>>>>>>>>>>>>>>>>>> modified the "profile" file in the /etc >directory >>>>>>> with >>>>>>>>>>>>>>>>>>>>>> the following: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> PATH="$PATH:/usr/local/sbin/ser:." >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Then I carried out the cvs instructions from >the >>>>>>> iptel >>>>>>>>>>>>>>>>>>>>>> site (as detailed at end of this mail) to >install >>>> SER >>>>>>>>>>>>>>>>>>>>>> 0.9.1. When >>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>> run "ser -V" I now see that SER has been >updated. >>>>>>>>>> However >>>>>>>>>>>>>>>>>>>>>> when I run /usr/local/sbin/serctl start to >start >>>> SER. >>>>>>>>>>>>>>>>>>>>>> I get an error: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Starting SER: PID file /var/run/ser.pid does >not >>>>>>>>>>>>>>>>>>>>>> exist -- SER start failed. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I used to start SER using /etc/init.d/ser >start. >>>> That >>>>>>>>>>>>>>>>>>>>>> also doesn't work. What could be wrong? Also >where >>>>>>>>>>>>>>>>>>>>>> is my new ser.cfg file stored? My old one is >still >>>>>>>>>>>>>>>>>>>>>> in >>>>>>> /etc/ser. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks again. >>>>>>>>>>>>>>>>>>>>>> Aisling. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> cd /usr/src >>>>>>>>>>>>>>>>>>>>>> export >>>>>>>>>>>>>> CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser >>>>>>>>>>>>>>>>>>>>>> cvs login >>>>>>>>>>>>>>>>>>>>>> [enter for password] >>>>>>>>>>>>>>>>>>>>>> "cvs co -r rel_0_9_0 sip_router" from onsip >site. >>>>>>>>>>>>>>>>>>>>>> cd sip_router >>>>>>>>>>>>>>>>>>>>>> make all >>>>>>>>>>>>>>>>>>>>>> make install >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>>>>>>>>>>> From: javarockx(a)gmail.com >>>>>>>>>>>>>>>>>>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>>>>>>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>>>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 08:07:35 -0500 >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Each linux user has an environment variable >>>> called >>>>>>>>>> PATH. >>>>>>>>>>>>>> You >>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>>>>>> set >>>>>>>>>>>>>>>>>>>>>>>> your path in the .bash_profile (assuming a >>>> redhat >>>>>>>>>>>>>>>>>>>>>>>> linux distro). Consult your linux distro for >>>>>>> setting >>>>>>>>>>>>>>>>>>>>>>>> environment >>>>>>>>>>>>>> variables. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On most you can just do this: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> export PATH=$PATH:/usr/local/sbin/ >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> But this will only be for you current logged >in >>>>>>>>>> session. >>>>>>>>>>>>>> When >>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>>> exit >>>>>>>>>>>>>>>>>>>>>>>> the bash shell this setting will be lost. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Tue, 29 Mar 2005 13:50:18 +0100, Aisling >>>>>>> O'Driscoll >>>>>>>>>>>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> Apologies if this is a ridculous question >where >>>>>>> will >>>>>>>>>> I >>>>>>>>>>>>>> find >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>> $PATH >>>>>>>>>>>>>>>>>>>>>>>>> variable? >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>>> Aisling >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>>>>>>>>>>>>>> From: javarockx(a)gmail.com >>>>>>>>>>>>>>>>>>>>>>>>>> To: ashling.odriscoll(a)cit.ie, >>>> serusers(a)iptel.org >>>>>>>>>>>>>>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to 0.9.0 >>>>>>>>>>>>>>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 07:49:44 -0500 >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> it looks like you have two copies of ser >on >>>>>>>>>>>>>>>>>>>>>>>>>>> your machine. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> You should complete remove /usr/sbin/ser >and >>>>>>>>>>>>>>>>>>>>>>>>>>> make sure /usr/local/sbin/ser is in your >>>> $PATH. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, 29 Mar 2005 13:43:56 +0100, >Aisling >>>>>>>>>> O'Driscoll >>>>>>>>>>>>>>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> When I type "which ser". I get >>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/sbin/ser. How can I proceed from >here?. >>>>>>>>>>>>>>>>>>>>>>>>>>>> Thank you for the >>>>>>> reply. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Aisling. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> ---- Original Message ---- >>>>>>>>>>>>>>>>>>>>>>>>>>>> From: javarockx(a)gmail.com >>>>>>>>>>>>>>>>>>>>>>>>>>>> To: ashling.odriscoll(a)cit.ie >>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: Re: [Serusers] SER 0.8.14 to >0.9.0 >>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Tue, 29 Mar 2005 06:46:20 -0500 >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Aisling, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> It seems like one of the following is >true: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1) you're somehow mixing 0.8.14 source >code >>>>>>>>>>>>>>>>>>>>>>>>>>>>> with 0.9.1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2) you have more than one copy of ser >>>>>>> installed >>>>>>>>>>>>>>>>>>>>>>>>>>>>> on your system. If you >>>>>>>>>>>>>>>>>>>>>>>>>>>>> type "which ser" does it point to >>>>>>>>>>>>>> /usr/local/sbin/ser ?? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Paul >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Tue, 29 Mar 2005 09:55:06 +0100, >Aisling >>>>>>>>>>>>>> O'Driscoll >>>>>>>>>>>>>>>>>>>>>>>>>>>>> <ashling.odriscoll(a)cit.ie> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I am still trying to change my SER >version >>>>>>> from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0.8.14 to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0.9.0. I have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> followed the instructions at the >following >>>>>>> link >>>>>>>>>> and >>>>>>>>>>>>>>>>> also >>>>>>>>>>>>>>>>>>>>> on >>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> onsip >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> site. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.iptel.org/ser/cvs/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> However when I run ser -V, I still see >>>> that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0.8.14. I've given an exact detail of >what >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> i do below and can someone >>>>>>>>>>>>>>>>>>>>>>> PLEASE >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PLEASE point out the mistake. Thank >you. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cd /usr/src >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> export >>>>>>>>>>>>>>>>>>>>>>> >>>>>>> CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/ser >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cvs login >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [enter for password] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here I've tried both "cvs co >sip_router" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for unstable version and "cvs co -r >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> rel_0_9_0 >>>> sip_router" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from onsip site. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cd sip_router >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make all >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> It says every file is updated but I >still >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> run the same stable version. I've >killed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> all ser >>>>>>>>>> processes >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> before running this command (killall >ser) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please let me know what Im doing wrong, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Aisling. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

[Serusers] digest authentication problems
by Damian Bundred 06 Apr '05

06 Apr '05

Hi, SER works fine when digest authentication is turned off, connecting a phone and a copy of SJPhone, however when i remove the comments for auth, and if(!(www_auten...)) ser dies whenever the one of the things try to connect to it. the following is recorded in ngrep U 192.168.0.18:5060 -> 192.168.0.6:5060 REGISTER sip:192.168.0.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.18;branch=z9hG4bKa6155d96e0772e23..From: <sip:phone_User@19 2.168.0.6>;tag=ac25e718e18ae5ea..To: <sip:phone_User@192.168.0.6>..Contact: <sip:phone_User@192.168.0.18>..Call-ID: 34cc 4c2e6df9395b@192.168.0.18..CSeq: 100 REGISTER..Expires: 3600..User-Agent: Grandstream BT100 1.0.5.16..Max-Forwards: 70.. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... # I 192.168.0.6 -> 192.168.0.18 3:3 ....E0........................}.REGISTER sip:192.168.0.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.0.18;branch=z9hG4bKa6155d96e0 772e23..From: <sip:phone_User@192.168.0.6>;tag=ac25e718e18ae5ea..To: <sip:phone_User@192.168.0.6>..Contact: <sip:phone_U ser(a)192.168.0.18>..Call-ID: 34cc4c2e6df9395b@192.168.0.18..CSeq: 100 REGISTER..Expires: 3600..User-Agent: Grandstream BT 100 1.0.5.16..Max-Forwards: 70..Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Length: 0.... i'm not 100% sure that i've set up the entry in the database corrently, but surely it should simply refuse connection to the phone rather than just dieing. Many thanks, Damian

2 1

RE: [Serusers] Acc, not getting BYE statements
by Matt Schulte 06 Apr '05

06 Apr '05

So just to be clear you are setting flags twice? This should be unneccesary as you only need to set them once. While setting them twice shouldn't break anything it's probly just a bad idea :-).. What I did with my build was (near the top of main route) flag everything except register's. We had problems where just like you, certain situations weren't getting tagged for CDR's. Afterwards we would process the CDR's to remove what we didn't need, such as 'inbound' calls and such. Also as you may already know acc must use stateful transactions, ie t_relay as opposed to a forward. That way you ensure everything gets processed accordingly anyway. Matt -----Original Message----- From: Barry Murphy [mailto:barry@unix.co.nz] Sent: Tuesday, April 05, 2005 8:33 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Acc, not getting BYE statements Hey guys, Got serweb reporting N/a for "Length of call" and "Hangup", so i've checked a few google howto's and example configs, however still not getting any. I get the initial INVITE and an ACK in the same second, but when the call ends, nothing. I have the following in my ser.cfg: # -- acc params -- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1 ) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("rr", "enable_full_lr", 1) # account completed transactions via syslog setflag(1); setflag(2); if(method=="INVITE" || (method=="ACK") || method=="BYE" ){ setflag(1); setflag(2); }; Barry _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

← Newer
1
...
57
58
59
60
61
62
63
...
70
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2005