sr-users August 2005

sr-users@lists.kamailio.org

220 participants
558 discussions

[Serusers] MEdiaproxy unable to resolve private IP to public IP
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, I m using ser-0.9.0 with mediaproxy, non natted clients can talk fine, but natted clients addresses are not resolved to public addresses.Also, the culprit I suppose is a function fix_nated_register() used in the ser.cfg which was not recognized by ser. The relevant code from ser.cfg is as follows: ... ... # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); # I commented the following line since it was not recognized by ser # fix_nated_register(); force_rport(); }; ... ... Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

1 0

[Serusers] SNOM registered, but doesnt ring
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, One of my client hardphone, which is a snom ip phone, is registered to the sip server. But when one calls the phone, one gets only a trying message and snom doesnt ring.On running the serctl ul show , the address of record for the snom phone is as follows. ---------------------------------------------- ...Record(0xb5583828)... domain: 'location' aor : 'ddempsay' ~~~Contact(0xb5585738)~~~ domain : 'location' aor : 'ddempsay' Contact : 'sip:therock@90.0.0.27:5060;line=71potf0e' Expires : 3523 q : 1 Call-ID : '3c464f84e016-mf5f9tl4bp70@90-0-0-27' CSeq : 2882 User-Agent: 'snom200-3.56y' received : '' State : CS_NEW Flags : 0 next : (nil) prev : (nil) ~~~/Contact~~~~ ---------------------------------------------- Where does the extra ;line=71potf0e' in the contact field come from. IS the problem created because of this line. Moreover, I dont think it follows the proper SIP URI format. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

[Serusers] 200 ok without contact header field
by Francisco Talavera 09 Aug '05

09 Aug '05

Hello, I had some problems with this scenario. UA SER --------------------------------Register----------------------------> <-------------------------200 ok without contact------------- The 200 ok response doesnt have the contact header field. And my UA needs this header field. I dont want to use save(location) function. Is there some function that adds the contact header in the response? Ing. Francisco Talavera Email: francisco.talavera(a)conexiongroup.com Conexión S.A. Asunción, Paraguay

2 2

[Serusers] starting and stopping ser
by Hemant Patel (IP) 09 Aug '05

09 Aug '05

3 2

[Users] acc module comments
by Klaus Darilion 09 Aug '05

09 Aug '05

Hi! If acc module was compile with SQL/Radius support, it is not possible to deactivate it. IMO this is not a good design, as switching from radius to sql accouting requires re-compilation of the acc module. It would be nice to deactivate the sql support for example by setting db_url to "" if the module was compiled with sql support. btw: is there a bugtracker to track such feature request or bug reports? is the bugtracker on sourceforge used? regards, klaus

2 2

[Serusers] 0.9.3 stable + uac from CVS
by Martin Anderberg 09 Aug '05

09 Aug '05

Hi there! I'm having some trouble with 0.9.3 and the uac-module. I've backported the module according to what is described in doc/parse_headers.txt and also patched using modules/uac/doc/replace_from.patch. The source is the one that's on the current CVS. The binaries are created ok and everything seems ok, however when trying to just alter the displayname with uac_replace_from("Anonymous","") the result is as follows: From: "Anonymous" <>;tag=CA1122244945309503;vsf=c2lwOjA0NjU5MDEwMDBAcHJveHkyLmRpZ2lzaXAubmV0. So it seems that instead of just leaving the URI alone the module replaces it. Is this a known problem? Thanks in advance. /M

1 0

[Serusers] Billing
by Marc Khayat 09 Aug '05

09 Aug '05

Hi all, Concerning billing, I've got the logs saved in a MySQL database and a syslog server. However, I need some kind of a billing server. Is there any "free" billing software that I can use and that can give me a web interface so that I can view every customer's logs...? Thanks, Marc

1 0

[Serusers] mysql - connection not found in the pool
by Hemant Patel (IP) 09 Aug '05

09 Aug '05

1 0

[Serusers] Problem with Unix Socket!
by Francisco Talavera 09 Aug '05

09 Aug '05

Hello, I am trying to do a force drop, using an external program. This program sends a BYE to the UA, via Unix Socket (ser.sock). The Bye looks like this: :t_uac_dlg:jm BYE sip:30003035@192.168.10.100:5060;user=phone . From: <sip:30003060@192.168.10.79;user=phone>;tag=357a0541b4a6fc93 To: <sip:30003035@192.168.10.79;user=phone>;tag=8e1f14f59d2c1f9d Cseq: 1243 BYE Call-ID: 64c75c67f1c0c450(a)192.168.10.115 . . This works fine!.. But I don't receive the response of a BYE in "jm" Unix socket. After I send the Bye, I create the "jm" Unix Socket. Next I send the BYE. And then I read the "jm" socket, but don't receive nothing. I have this error 5(6782) ERROR: tsend_dgram: failed to send: (22) Invalid argument ------------------------------------------------- My ser.cfg looks like debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=192.168.10.79 unix_sock = "/tmp/ser.sock" unix_sock_children = 1 unix_tx_timeout = 2000 In my ser debug I receive this 2(6779) parse_headers: flags=ffffffffffffffff 2(6779) check_via_address(192.168.10.100, 192.168.10.100, 0) 2(6779) DEBUG:destroy_avp_list: destroying list (nil) 2(6779) receive_msg: cleaning up 1(6778) get_method: method: 'BYE' 1(6778) get_ruri: 'sip:30003035@192.168.10.100:5060;user=phone' 1(6778) get_nexthop: next hop empty 1(6778) get_headers: From: <sip:30003060@192.168.10.79;user=phone>;tag=357a0541b4a6fc93 To: <sip:30003035@192.168.10.79;user=phone>;tag=8e1f14f59d2c1f9d Cseq: 1243 BYE Call-ID: 64c75c67f1c0c450(a)192.168.10.115 1(6778) parse_headers: flags=ffffffffffffffff 1(6778) DEBUG: add_param: tag=8e1f14f59d2c1f9d 1(6778) end of header reached, state=29 1(6778) DEBUG: get_hdr_field: <To> [62]; uri=[sip:30003035@192.168.10.79;user=phone] 1(6778) DEBUG: to body [<sip:30003035@192.168.10.79;user=phone>] 1(6778) get_hdr_field: cseq <Cseq>: <1243> <BYE> 1(6778) get_body_lines: 1(6778) DEBUG: add_param: tag=357a0541b4a6fc93 1(6778) end of header reached, state=29 1(6778) DEBUG:tm:t_uac: next_hop=<sip:30003035@192.168.10.100:5060;user=phone> 1(6778) DEBUG: mk_proxy: doing DNS lookup... 1(6778) DEBUG:destroy_avp_list: destroying list (nil) 1(6778) DEBUG: dlg2hash: 38378 1(6778) DEBUG: add_to_tail_of_timer[4]: 0xbd6aa390 1(6778) DEBUG: add_to_tail_of_timer[0]: 0xbd6aa3a0 5(6782) SIP Reply (status): 5(6782) version: <SIP/2.0> 5(6782) status: <481> 5(6782) reason: <No Such Call> 5(6782) parse_headers: flags=2 5(6782) Found param type 232, <branch> = <z9hG4bKae59.cab8b187.0>; state=16 5(6782) end of header reached, state=5 5(6782) parse_headers: Via found, flags=2 5(6782) parse_headers: this is the first via 5(6782) After parse_msg... 5(6782) forward_reply: found module tm, passing reply to it 5(6782) DEBUG: t_check: msg id=5 global id=0 T start=0xffffffff 5(6782) parse_headers: flags=22 5(6782) DEBUG: add_param: tag=8e1f14f59d2c1f9d 5(6782) end of header reached, state=29 5(6782) DEBUG: get_hdr_field: <To> [62]; uri=[sip:30003035@192.168.10.79;user=phone] 5(6782) DEBUG: to body [<sip:30003035@192.168.10.79;user=phone>] 5(6782) get_hdr_field: cseq <CSeq>: <1243> <BYE> 5(6782) DEBUG: t_reply_matching: hash 38378 label 2015071148 branch 0 5(6782) DEBUG: t_reply_matching: reply matched (T=0xbd6aa278)! 5(6782) DEBUG: t_check: msg id=5 global id=5 T end=0xbd6aa278 5(6782) DEBUG: reply_received: org. status uas=0, uac[0]=0 local=2 is_invite=0) 5(6782) ->>>>>>>>> T_code=0, new_code=481 5(6782) Warning: run_failure_handlers: no UAC support (0, 256) 5(6782) DEBUG: local_reply: branch=0, save=0, winner=0 5(6782) DEBUG: local transaction completed 5(6782) DBG: trans=0xbd6aa278, callback type 256, id 0 entered 5(6782) ERROR: tsend_dgram: failed to send: (22) Invalid argument 5(6782) DEBUG: cleanup_uac_timers: RETR/FR timers reset 5(6782) DEBUG: add_to_tail_of_timer[2]: 0xbd6aa2c0 5(6782) DEBUG:destroy_avp_list: destroying list (nil) 5(6782) receive_msg: cleaning up Thanks in advance Ing. Francisco Talavera

1 0

[Serusers] Postgres
by Sebastian Kühner 09 Aug '05

09 Aug '05

Hi! I have ser running with the postgres module. When I make a ps -el, there are many "postmaster" entries. My questions: 1.) Is that normal? 2.) I have max_connections=250 in my postgres configuration file. The more users are connected to my ser, the more connections do I need? ... or ser only "needs" this connections on startup? Many thanks for your help!! Sebastian

2 2

← Newer
1
...
37
38
39
40
41
42
43
...
56
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2005