Hi,
My SER is able to send out calls to PSTN via a nextone but when
the remote party picks up the call, SER is not able to detect that. The case
I think might be that SER is not getting ACK from nextone.
The scenario works fine when calls are sent out from asterisk, in that case,
calls are taking place fine. I have done everything acc. to the onsip.org
pstn GW document.
Also, How can I set the outgoing (caller-id) rpid field from ser.using
authdb:rpid modparam gives error "parameter not found in moduel auth_db".
Kindly guide urgently.
Thanks and Regards,
Ashutosh Kumar
Hello,
Has anybody had any experience with using BigIP to
load-balance / failover SER?
Thanks in advance,
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
Hello Tony.
I'm not using the from_patter. This is an example :
+----------------+-------+--------------+
| src_ip | proto | from_pattern |
+----------------+-------+--------------+
| 10.0.0.1 | udp | |
| 10.0.0.2 | udp | |
+----------------+-------+--------------+
Cheers,
Ricardo Martinez.-
> -----Mensaje original-----
> De: Tony Baartman [mailto:bart@global.co.za]
> Enviado el: Miércoles, 07 de Septiembre de 2005 11:45
> Para: 'Ricardo Martinez'
> CC: serusers(a)lists.iptel.org
> Asunto: [BULK] RE: [Serusers] IP Authentication
> Importancia: Baja
>
>
> Hi
>
> Cool seems to do its job, can't make calls now ;o)
>
> What is the format of the fields in the table? Currently got:
>
>
> +--------------+-------+---------------+
> | src_ip | proto | from_pattern |
> +--------------+-------+---------------+
> | 196.47.3.231 | TCP | @196.30.7.111 |
> +--------------+-------+---------------+
>
> Somehow I think this is VERY wrong????
>
> Thanks
>
> Tony
>
Hi
Cool seems to do its job, can't make calls now ;o)
What is the format of the fields in the table? Currently got:
+--------------+-------+---------------+
| src_ip | proto | from_pattern |
+--------------+-------+---------------+
| 196.47.3.231 | TCP | @196.30.7.111 |
+--------------+-------+---------------+
Somehow I think this is VERY wrong????
Thanks
Tony
Hi Guys,
It seems that changes made to a message using "modules/textops::replace"
function
are not available for immediate search using "modules/textops::search"?!
Is this correct?!
I would appreciate your help very much
Thanks
ramin
Hi
Can I use Textops, to alter headers in a invite message?
This is what I'm trying to do!
search_append("P-Asserted-Identity: ", "<sip:");
search_append(" [0-9]\{8\}", "@sip.domian.com>");
Is this at all possible or should I try some other way?
The data I want to add to the header is static.
I'm using OpenSER 0.9.5
Thanks in advance
Martin
Hi,
when a routing in SER goes into the defined
failure_route, how can I find out whether fr_timer or
fr_inv_timer have expired?
So far I only know the way to handle different
SIP-messages with t_check_status()
Many thanks in advance,
Gerhard
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
This is how i use it :
loadmodule "/usr/local//lib/ser/modules/mysql.so"
loadmodule "/usr/local//lib/ser/modules/permissions.so"
....
# ++++ module permissions
modparam("permissions", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("permissions", "db_mode", 0)
....
# -------------------------------------------------------------
# Chequeo de los INVITE, si no es trusted le hacemos Challenge
# --------------------------------------------------------------
if (method=="INVITE" && !allow_trusted()) {
...challenge....
};
};
Regards,
Ricardo Martinez.-
> -----Mensaje original-----
> De: Tony Baartman [mailto:bart@global.co.za]
> Enviado el: Miércoles, 07 de Septiembre de 2005 4:06
> Para: 'Juha Heinanen'
> CC: serusers(a)lists.iptel.org
> Asunto: RE: [Serusers] IP Authentication
>
>
> Hi
>
> This is part of my problem, the README.permissions file has
> only about four
> lines of info....
>
> There was a post about using a mysql DB as the lookup, but I
> have no idea
> how to enable it, new to the world of SER :o)
>
> Any further help muchly appreciated....
>
> Ciao
>
>
> -----Original Message-----
> From: Juha Heinanen [mailto:jh@tutpro.com]
> Sent: Wednesday, September 07, 2005 8:42 AM
> To: Tony Baartman
> Cc: 'Ricardo Martinez'; serusers(a)lists.iptel.org
> Subject: RE: [Serusers] IP Authentication
>
> Tony Baartman writes:
>
> > modparam("permissions", "allow_trusted", "/tmp/trust_host")
>
> permissions module does not have a parameter called "allow_trusted".
> see README file or source code.
>
> -- juha
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
Hello,
I've some troubles for incoming calls from others
domains
When I dial numbers in my domain all is ok (see
internal_sip_call ethereal file)
no problem onreply route
However when somebody call numbers in my domain
something is wrong with status 200 OK / SIP/SDP
message
Public ip address is not set in sdp message see
(incoming_call ethereal file).
Harry
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
Hello,
I've some troubles for incoming calls from others
domains
When I dial numbers in my domain all is ok (see
internal_sip_call ethereal file)
no problem onreply route
However when somebody call numbers in my domain
something is wrong with status 200 OK / SIP/SDP
message
Public ip address is not set in sdp message see
(incoming_call ethereal file).
Harry
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
