sr-users April 2006

sr-users@lists.kamailio.org

188 participants
432 discussions

[Serusers] IM and presence problems
by İlker Aktuna (Koç.net) 28 Apr '06

28 Apr '06

Hi all, I am receiving following errors when trying to send an instant message from a client to other sip client : /root/sexr/sbin/ser[25819]: Delivering MESSAGE using usrloc /root/sexr/sbin/ser[25817]: MSILO: MESSAGE forward failed - storing it /root/sexr/sbin/ser[25817]: ERROR: warning_builder: buffer size exceeded /root/sexr/sbin/ser[25817]: WARNING: warning skipped -- too big There are 2 errors: 1- message forward fails - how can I understand why ? 2- when storing with MSILO buffer size exceeds - why ? And how can I fix it ? I really need help on these issues. Please don't ignore my question... Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/0A090E07/05074901/0C094500/291…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] Re: loading serweb config files?
by Mindaugas Kuprys 28 Apr '06

28 Apr '06

Hi everyone again, I have some troubles with serweb installation . Help is needed ;) After entering admin username and password I see blank screen in admins page Actually I don't see mysql query for a password in a server. And I think this is the problem. I have filled mysql configuration in config/config_data_layer.php . Can anyone tell me then all files in /config dir are loaded? this is serweb log: Apr 27 15:23:01 serweb [info] Useing file from default domain for filename: styles.css Apr 27 15:23:01 serweb [info] Useing file from default domain for filename: prolog.html Apr 27 15:23:01 serweb [info] Useing file from default domain for filename: separator.html Apr 27 15:23:01 serweb [info] Useing file from default domain for filename: epilog.html Apr 27 15:23:11 serweb [debug] User login: values from login form: username: admin(a)domain.ltd, password: somepass Apr 27 15:23:11 serweb [debug] User login: checking password of user with username: admin, domain: domain.ltd Thanks, Mindaugas

2 2

[Serusers] SER+Asterisk Connection
by fay butt 28 Apr '06

28 Apr '06

Hi all, I installed the SER and Asterisk on two different boxes on LAN.. I configured the SER and Asterisk in a way thay that the user agents communicate between them. Now, the problem is in the second method , if i use the register command in the Asterisk (sip.conf) , the user registers in the SER and we can view that user in the location table in SER,but at the same time the UA's send busy tone and i gets the messege in the asterisk proxy authentication required. I use this procedure for registeration 1) In the general section of sip.conf register => user[:secret[:authuser]]@host[:port][/extension] 2)sip.conf [mysipprovider-out] type=peer secret=password username=2345 host=sipserver.mysipprovider.com fromuser=2345 fromdomain=fwd.pulver.com nat=yes ;context=from-mysipprovider ; 3)In extensions.conf exten => _9.,1,Dial(SIP/${EXTEN:1}@mysipprovider-out,30,r) Can anybody tell me what i am doing wring with this process... best regards, --------------------------------- Yahoo! Mail goes everywhere you do. Get it on your phone.

2 2

[Serusers] MOH for SER :: Need help
by dashy dude 28 Apr '06

28 Apr '06

Dear All I am trying to figure out how to use Music on hold (using asterisk may be) for my SER Any ideas how to do it? Dashy __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

[Users] Random error with NAT (error in 'c field')
by Bruno Machado 28 Apr '06

28 Apr '06

Hi Bogdan The first SIP message is from call that WORKS perfectly: the "c header" has a valid IP that handle the media. Below it, we have the message with wrong "c header": there is an invalid IP. This way, the media isnt sent to the media proxy. I did this dumps in the SIP PROXY. The only way to correct the situation is rebooting the openser. By the way: I dont change anything in the script to make it works. Best regards Bruno Machado U IP_My_Proxy:5060 -> 200.171.160.13:5060 INVITE sip:11000606@200.171.160.13:5060 SIP/2.0 Record-Route: <sip:IP_My_Proxy;ftag=ad50ff6e6fb26e6e;lr=on> Via: SIP/2.0/UDP IP_My_Proxy;branch=z9hG4bKa079.9071d6a5.0 Via: SIP/2.0/UDP 192.168.88.101;rport=57157;received=200.216.162.18;branch=z9hG4bK9771e2044f41cee3 From: "Alexandre BT100" <sip:24005110@myproxy>;tag=ad50ff6e6fb26e6e To: <sip:11000606@myproxy> Contact:<sip:24005110@200.216.162.18:57157> Supported: replaces Proxy-Authorization: Digest username="24005110", realm="myproxy", algorithm=MD5, uri="sip:11000606@myproxy", nonce="44510d68180175d68510d001330893f695eadd50", response="ed83c6657bc59f00635361215d1b8b93"..Call-ID: db5d8eb678f6c018(a)192.168.88.101 CSeq: 55645 INVITE User-Agent: Grandstream BT110 1.0.8.16 Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE Content-Type: application/sdp Content-Length: 429 P-hint: usrloc applied P-hint: nat-p2p v=0 o=24005110 8000 8001 IN IP4 192.168.88.101 s=SIP Call c=IN IP4 myproxy t=0 0 m=audio 64344 RTP/AVP 18 4 0 8 2 99 9 101 a=sendrecv a=rtpmap:18 G729/8000 a=rtpmap:4 G723/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:2 G726-32/8000 a=rtpmap:99 iLBC/8000 a=fmtp:99 mode=20 a=rtpmap:9 G722/16000 a=ptime:20 a=rtpmap:101 telephone-event/8000 a=fmtp:1010-11 a=direction:active a=nortpproxy:yes U IP_My_Proxy:5060 -> 200.171.160.13:5060 INVITE sip:11000606@200.171.160.13:5060 SIP/2.0 Record-Route: <sip:IP_My_Proxy;ftag=da3a34829a170ace;lr=on> Via: SIP/2.0/UDP IP_My_Proxy;branch=z9hG4bKd6cc.be1fc1f4.0 Via: SIP/2.0/UDP 192.168.88.101;rport=57157;received=200.216.162.18;branch=z9hG4bK019a1f171ca1bf14 From: "Alexandre BT100" <sip:24005110@myproxy>;tag=da3a34829a170ace To: <sip:11000606@myproxy> Contact: <sip:24005110@200.216.162.18:57157> Supported: replaces Proxy-Authorization: Digest username="24005110", realm="myproxy", algorithm=MD5, uri="sip:11000606@myproxy", nonce="44510c217bc74fe6e203d22c12c3863536776e75", response="c403be69f25add894daeccd2a29bf0e4" Call-ID: 57efde4d3bb5a88f(a)192.168.88.101 CSeq: 5727 INVITE User-Agent: Grandstream BT110 1.0.8.16 Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE Content-Type: application/sdp Content-Length: 410 P-hint: usrloc applied P-hint: nat-p2p v=0 o=24005110 8000 8001 IN IP4 192.168.88.101 s=SIP Call c=IN IP4 192.168.88.101 t=0 0 m=audio 5004 RTP/AVP 18 4 0 8 2 99 9 101 a=sendrecv a=rtpmap:18 G729/8000 a=rtpmap:4 G723/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:2 G726-32/8000 a=rtpmap:99 iLBC/8000 a=fmtp:99 mode=20 a=rtpmap:9 G722/16000 a=ptime:20 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-11 a=direction:active --------------------------------- Abra sua conta no Yahoo! Mail - 1GB de espaço, alertas de e-mail no celular e anti-spam realmente eficaz. --------------------------------- Abra sua conta no Yahoo! Mail - 1GB de espaço, alertas de e-mail no celular e anti-spam realmente eficaz.

2 1

[Users] Re: Got SEMS-svn and OpenSER-cvs to work
by Rick van Rein 28 Apr '06

28 Apr '06

Hi, Just for the (pipermail) record: How I got OpenSER+SEMS to work on FreeBSD. OpenSER is not causing any problems in combination with SEMS-svn anymore. No need to use any specific version, just the CVS-head from openser.org. It now works completely, an IVR app is reading out .wav files and processing the DTMF music that I play for it. In openser.cfg I used ... unix_sock="/tmp/openser.sock" ... if(!t_write_unix("/tmp/sems.sock", "ivr")){ t_reply("500", "error contacting sems"); } ... In sems.conf I used ... socket_name=/tmp/sems.sock reply_socket_name=/tmp/sems.reply.sock ser_socket_name=/tmp/openser.sock send_method=socket ... I started OpenSER with openserctl start I started SEMS with /path/to/sbin/sems -d vr0 -f /path/to/etc/iptel/sems/sems.conf The name vr0 happens to be the ethernet interface that I am using, on Linux you'd mostly use eth0 for the same setup. All this runs on FreeBSD with adaptions that were checked into SVN, rev.39. Greetings, -Rick

3 2

RE: [Users] Force RTP stream to go through mediaproxy
by Sam Lee 28 Apr '06

28 Apr '06

The problem appears when I tried to do that . The error I mentioned below was encountered, session.py didn't show any session establish if this error appears on the syslog. Any idea ? -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Wednesday, April 26, 2006 3:41 PM To: Sam Lee Cc: users(a)openser.org Subject: Re: [Users] Force RTP stream to go through mediaproxy Hi, most probably, in your script, you use mediaproxy only if NAT was detected (and a flag was set). So, you do not have to test the flag (to use mediaproxy only for nated calls), but call mediaproxy for all calls. regards, bogdan Sam Lee wrote: >Can I don't bother about the NAT test and push everything thru >mediaproxy ? >I can't quite understand why are there different NAT_Test , and the >example configs uses almost all of them... > >Regards, >Sam > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Wednesday, April 12, 2006 5:04 PM >To: Sam Lee >Cc: users(a)openser.org >Subject: Re: [Users] Force RTP stream to go through mediaproxy > >Hi, > >maybe you do not perform the proper nat tests. see: > http://openser.org/docs/modules/1.0.x/mediaproxy.html#AEN113 > >regards, >bogdan > > >Sam Lee wrote: > > > >>Hi all, >> >>I got the openser and mediaproxy up working and fine. >>The mediaproxy is able to work with certain NATED configurations, but >>not all. >>When i tried to check what is the problem , those NATED configurations >> >> > > > >>that were not working was found not to have made use of the >>mediaproxy, which causes the problem. >> >>What i am trying to do now, but without much success, is to force all >>the RTP media to go through the mediaproxy. Is there any way i can >>force all the RTP media to go through the mediaproxy without all the >>client_nat_test stuff...? >> >>Any hints will be much appreciated ! >> >>Regards, >>Sam >> >>---------------------------------------------------------------------- >>- >>- >> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> >> > > >

2 1

[Serusers] SERWEB (urgent)...path problem(include)
by fay butt 28 Apr '06

28 Apr '06

Hi, I am new user in ser, I still have a problem with SERWEB. I installed the serweb but it is not working in the browser. Can anybody tell me how to configure the serweb. serweb location folder is : /var/www/html/serweb/ when i keep any .php or .html file in /var/www/html/ it woks , but the serweb is not accessible with command http://localhost/serweb/admin/index.php. If anybody have the Idea about SERWEB configuration,plz let me know.... thanx --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.

3 3

[Users] Regarding on OpenSER and softphone
by raviprakash sunkara 28 Apr '06

28 Apr '06

Hi Everybody. Just a small conformation about OpenSER and Softphone.. I'd installed openser and after so that install the sip softphone(X-Lite). After the settings in X-lite (sip-proxy..domain ), then i make a call ... But shows " Logging failed contact network admin " what's means this ?. I think I need to write a script ( modules ) in openser.cfg file for Register and authentication . how to make a calls and what are the steps should take in openser.cfgfile...? please help in this regarding and please excuse " in My English ".. Thanks and Regards.... Sunkara Ravi Prakash....:-)

1 0

[Serusers] How to send a real phone number to pstn?
by wu yaqian 28 Apr '06

28 Apr '06

Hello,every one: I use ser-0.9.6.I have database authorize.I have accounts like 10000,10001 and so on.I want to send a real phone number (user difined) to pstn.This means when user 1000 call a pstn number he can send his real moblie phone number to the caller.(The caller can see this number). What should i do. Thanks a lot.

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
44
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2006