Thanks Vaclav for the information as at one stage I thought my message was lost!
Is that the user must need to be in the database? I though the user location in memory should work. Since my registration packet arrives fine and I can see the response to the REGISTER packets, I assume users are are in memory but I could not check from serctl command as I mentioned earlier.
I will use the latest serctl but I would like to know if the database is absolutely must for the presence to work?
Regards,
Suraj
----------------------------------------------------------------------------------
Hi Suraj.
Sorry for delayed reply.
On Wed, May 03, 2006 at 11:10:32PM -0400, Suraj Kumar wrote:
> Hi Vaclav,
>
> Thanks for the help! That helped!!
>
> However, when I registered two users from windows messanger, I can login but I
cannot see them with the serctl ul show command which shows the following
message :
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> 500 Command 'ul_dump' not found
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Might be, that this command is still not implemented (it worked in older
SER versions, but it was rewritten then and may be, that it was not
reimplemented yet). May be, that new serctl (in tools/serctl in source
tree) has another command which is similar to this. Try to look there.
>
> If i add a contact in the IM client, SER displays the following message:
>
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> subscription to invalid user sip:201@xxx.xxx.248.115
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
> I have used the config sample from the example with DB in the presence hand
book:
> but my user location is set as follows :
> modparam("usrloc", "db_mode", 0)
>
There are used functions lookup_user and lookup_domain from modules
uri_db and domain (I think) which work with database. The subscription
probably fails due to that these functions can not find the user in
database. Have you added this user using serctl?
Vaclav
>
> Thanks a lot!
> Suraj
>
I Setup SER with Mediaproxy.
I want to know how to config SER, so that SER can Record the CDR, especially the duration talking time.
How to make ser record mediat connectiing time, media disconnectiing time, and duration?
pear-log package is not probably installed. If it is, see php log or
apache error log.
Karel
Phuong Nguyen Trong napsal(a):
> When I enable logging in serweb, and then, I try to access to SERweb home
> page( http://mydomain.com/serweb/admin/index.php ).
> There is a white page (It means that on screen don't have anything!).
> But, when I disable logging, the "log in" web page is display OK.
> Could you find any problems on this?
>
> Phuong Nguyen
> IP Clients Group
> ESCS Dept
> TMA company.
> http://www.tma.com.vn/
> -----Original Message-----
> From: Karel Kozlik [mailto:karel@iptel.org]
> Sent: Wednesday, April 19, 2006 12:31 PM
> To: Phuong Nguyen Trong
> Cc: serusers(a)lists.iptel.org
> Subject: Re: [Serusers] I have problem with my SERWEB version 0.9.4
> (Installed on FC4) , with SER version is 0.9.6
>
> Hi,
> enable logging in serweb, set log level to debug and see the log file.
>
> Karel
>
> Phuong Nguyen Trong napsal(a):
>> I try to install SERweb 0.9.4 is running with SER 0.9.6 ( Is it OK?)
>> SER is running OK but I don't have software to test the connection is
>> managed by SER. Anyone have software to test its?
>>
>> My major problem is: SERWeb is running OK with user. I can create, update,
>> delete user using account of normal user.
>> But I cannot access to admin mode using default username ( admin ) and
>> default password ( heslo ). The phenomenon of error is: (Only one line to
>> describe this error).
>> Bad username or password
>> Only one line to describe this error.
>> I try to solve this problem rely on previous resolved similar problems in
>> our mailing lists. But it still have this problem.
>> Thanks a lot for any solution of this,
>>
>> Phuong Nguyen
>>
>> IP Clients Group
>> ESCS Dept
>> TMA company.
>> http://www.tma.com.vn/
>>
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers(a)lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>
I would want to know if with the LCR module I could to send more then 1
Invite to IPs destination?
I have 2 or more possible OpenSER that could receive Invite with prefix
XYZ, than could send a lot of INVITEs at the same time (fork to more than
one Openser destination). Is this possible with LCR? If not possible how
could I do this?
Hi all
Does any one integrated Voice mail with Asterisk
with SER
I have SER running with some options of basic
on the stage level to develop my application
I would like to add Voice Services to SER
So how can i integrate Voice mail option with SER ( not sending mail)
Direct dialing some number and hear voices
ram
I've extract serweb directorys under /srv/www/htdocs (default dir for apache
2).
I've created an alias for the path serweb/html .
When I call the url on the browser as
localhost/serweb
localhost/serweb/html
localhost/serweb/html/user/index.php
localhost/serweb/user/index.php
or instead of localhost The IP of the pc or the name of the pc
I always get Access denied error
Waht can I do ??
Thanks for reply.
When I have a 404 Not Found, openser doesn't enter in failure root block and so it doesn't store anything into db. In attach my cfg file.
Had a REFER message, why and what does it means?
Thanks,
Davide
-----Messaggio originale-----
Da: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro]
Inviato: mercoledì 10 maggio 2006 23.56
A: D'Addelfio Davide
Cc: users(a)openser.org
Oggetto: Re: [Users] failure_route
Hi,
D'Addelfio Davide wrote:
> Hi all,
>
> i have 2 questions for the forum:
>
> 1) What can I do to simulate a failure message to understand if
> openser store it into database, through acc_db_request?
>
just send it back to your proxy with a username that does not exists in
RURI -> 404 Not Found.
> 2) Have I any chance to get information from reply messages, like
> storing some in db or something else? I know I can't use acc and avp
> module in on_reply route block, so any suggestion?
>
not from on_reply but from the failure_route you can.
regards,
bogdan
Hi Shane,
these functions works over the message body (SDP in your case). the
functions without the "_body" suffix works over the the headers.
I guess you find all you need here:
http://openser.org/docs/modules/1.1.x/textops.html
regards,
bogdan
Shane Burrell wrote:
>Does it also work with SIP headers? And the SDP section?
>
>-----Original Message-----
>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro]
>Sent: Friday, May 12, 2006 4:43 AM
>To: Shane Burrell
>Cc: users(a)openser.org
>Subject: Re: [Users] SDP Invite message modification.
>
>Hi Shane,
>
>you have the script functions (from textops) like
>(search|replace|subst)_body
> http://openser.org/docs/modules/1.1.x/textops.html
>
>regards,
>bogdan
>
>Shane Burrell wrote:
>
>
>
>>I need to proxy and modify the Invite SDP. Can I do this from the cfg
>>or do I need to look at a module like nathelper to modify the SDP?
>>Below is an example
>>
>>
>>
>>Inbound to openser
>>
>>---Non-Working SDP---
>>
>>v=0
>>
>>o=nt01-1w-lax 1234 1146761158 IN IP4 152.92.17.27 s=sip call t=0 0
>>m=audio 38936 RTP/AVP 0 18 101 c=IN IP4 152.92.17.27
>>
>>a=rtpmap:101 telephone-event/8000
>>
>>a=fmtp:101 0-15
>>
>>
>>
>>
>>
>>
>>
>>converted to - >
>>
>>
>>
>>Outbound to my gateway
>>
>>v=0
>>
>>o=ast12345sg 1220177409 1220177409 IN IP4 152.92.17.27
>>
>>s=-
>>
>>c=IN IP4 152.92.17.27
>>
>>t=0 0
>>
>>a=sendrecv
>>
>>m=audio 18006 RTP/AVP 0 18 18
>>
>>a=fmtp:18 annexb=no
>>
>>a=fmtp:18 annexb=yes
>>
>>
>>
>>TIA,
>>
>>
>>
>>Shane
>>
>>
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>Users mailing list
>>Users(a)openser.org
>>http://openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>>
>>
>
>
>
right!
my typing error :(.
thanks and regards,
bogdan
Juha Heinanen wrote:
>Bogdan-Andrei Iancu writes:
>
> > cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/openser co sip_server
> >
> > would be changed to
> >
> > cvs -d:pserver:anonymous@openser.cvs.sourceforge.net:/cvsroot/openser co sip_server
>
>should be "co sip-server".
>
>-- juha
>
>
Hi everybody,
as SF seams to have problems with CVS access, problems that cannot be
reasonable (as time) solved, the board of the project decided to migrate
the project repository from CVS to SVN (still being hosted on SF).
Starting from now, all CVS access will be blocked as the migration
process will start. The complete process may take couple of days
(migration and SVN configuration), so please be patience - I will let
you know as soon as public and developer access to SVN is available.
thanks for understanding,
Bogdan