sr-users June 2006

sr-users@lists.kamailio.org

203 participants
495 discussions

by raviprakash sunkara

Hi Users... The UAC's behind the NAT is hung up the softphones.. Automatically... I think Ack is Losting .. So the Session is Looses.. here ...... in this :----> nat_uac_test(paramter) what parameters should placed here.... 3 or 10 or 1 Same fo fix_naed_sdp().. --------------------------- opense,cfg.... route { route(2); if(!method=='ReGISTER') { record_route(); }; if(uri==myself) { ..... ...... .... } route(1); } route[1] { log("Testing-------> route[1] \n"); if (subst_uri('/(sip:.*);nat=yes/\1/')){ setflag(6); }; if (isflagset(5)||isflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ log("Testing-------> route[2] \n"); # force_rport(); if (nat_uac_test("19")) { log("Testing-------> nat_uac-test_19\n"); if (method=="REGISTER") { log("Testing-------> nat _ reg \n"); fix_nated_contact(); } else if (method=="INVITE") { log("Testing-------> nat_cantact \n"); fix_nated_sdp("1"); # fix_nated_contact(); }; force_rport(); setflag(5); }; } route[3] { log("Testing-------> route 3 \n"); if (is_method("BYE|CANCEL")) { log("Testing-------> Bye\n"); acc_db_request("Stop","acc"); unforce_rtp_proxy(); } else if (is_method("INVITE")){ log("Testing-------> Invite in route [3\n"); # fix_nated_sdp("3"); acc_db_request("Start","acc"); force_rtp_proxy(); t_on_failure("1"); } else if(is_method("ACK")) { log("Testing-------------------> ACK\n"); force_rtp_proxy(); }; if (isflagset(5)) { # fix_nated_sdp("3"); search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); }; t_on_reply("1"); } failure_route[1] { if (isflagset(6) || isflagset(5)) { acc_db_request("Stop","acc"); unforce_rtp_proxy(); } } onreply_route[1] { log("Testing-------> t_on_reply\n"); if ((isflagset(5) || isflagset(6)) && status=~"(183)|(2[0-9][0-9])" && (!search("^Content-Length:\ 0"))) { log("Testing ---> 183 200 \n"); force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); # if (isflagset(6)) { ## fix_nated_sdp("1"); # fix_nated_contact(); # } exit; } -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

18 years, 4 months

[Users] Is there a way to leave a route block and return to it where you left?

by Brandon Price

I have a route block that performs callerid name lookups for incoming calls. I want to leave this as a separate route block, and not include it into the incoming route for simplicity of development. I basically want to hop out of route 2 down to route 101, then hop back to route 2 under the line that is pointed to. Any clues,? can this even be done or does the structure of the tm (being stateless) limit it? Is there a way to hop to a certain line number of a route like say route(2,4); going to route 2 line 4. I dunno. ############################################################### # INCOMING ############################################################### route[2] { xlog("INVITE Received (incoming): $fu -> $ru"); setflag(1); strip(1); route(101); <--- do more stuff ......................................... ######################################################################## ################################## # CNAM ######################################################################## ################################# route[101] { xlog("Running cnam query"); # do some stuff.... return; };

18 years, 4 months

[Users] 404 Not found

by Kenny Chua

Hello all, I've registered my SPA 3000 on my openser server. It logs in and everythin works fine. However I was wondering why do I get this 404 Not found when I do ngrep -qt port 5060. What is causing this? And how do I get rid of it? U 2006/06/28 01:24:52.587457 192.168.1.101:5060 -> 192.168.1.6:5060 NOTIFY sip:192.168.1.6 SIP/2.0..Via: SIP/2.0/UDP 192.168.1.101:5060;branch= z9hG4bK-9291d204..From: Kenny Sipura <sip:203@192.168.1.6>;tag=6824a583236f 93f1o0..To: <sip:192.168.1.6>..Call-ID: 3297ad4b-b2ceeec9@192.168.1.101..CS eq: 413 NOTIFY..Max-Forwards: 70..Event: keep-alive..User-Agent: Linksys/SP A3000-3.1.10(GWd)..Content-Length: 0.... U 2006/06/28 01:24:52.598448 192.168.1.6:5060 -> 192.168.1.101:5060 SIP/2.0 404 User Not Found..Via: SIP/2.0/UDP 192.168.1.101:5060;branch=z9hG 4bK-9291d204..From: Kenny Sipura <sip:203@192.168.1.6>;tag=6824a583236f93f1 o0..To: <sip:192.168.1.6>;tag=eb9822f1ed1b15a932bf98c097b3aaca.d130..Call-I D: 3297ad4b-b2ceeec9@192.168.1.101..CSeq: 413 NOTIFY..Server: OpenSer (1.0. 1 (i386/linux))..Content-Length: 0..Warning: 392 192.168.1.6:5060 "Noisy fe edback tells: pid=4969 req_src_ip=192.168.1.101 req_src_port=5060 in_uri=s ip:192.168.1.6 out_uri=sip:192.168.1.6 via_cnt==1".... **********Openser.cfg********************************** debug=3 fork=yes log_stderror=no listen=192.168.1.6 alias=test.com port=5060 children=32 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); t_relay(); exit; } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { xlog("Does not have to tag, FORBIDDEN\n"); sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); xlog("Forcing rtpport\n"); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); xlog("Unforce RTP proxy2\n"); }; xlog("Dunno why forbidden\n"); sl_reply_error(); xlog("Forbidden4\n"); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); xlog("Setflag cos behind NAT\n"); } lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (uri=~"^sip:00[0-9]*@") { # International PSTN xlog("International PSTN\n"); strip(2); route(4); route(5); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); xlog("NAT Traversal Section\n"); } } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- xlog("Routing to PSTN gateway\n"); rewritehostport("pstn.gateway:5060"); avp_write("i:45", "inv_timeout"); route(1); xlog("Routed to PSTN gateway\n"); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

18 years, 4 months

[Users] modules API

by Simon Morvan

Hello there, Simple question : What is the "rank" passed to the per-child module initialization function ? And why is it sometimes negative ? -- Simon Morvan.

18 years, 4 months

[Serusers] CDRTool / asterisk billing based

by Concy Pereira

Hi Harry You can try out these two tools TraBas and Istpp Message: 15 Date: Thu, 22 Jun 2006 17:53:30 +0200 (CEST) From: <hgaillac-sip(a)yahoo.fr> Subject: [Serusers] [Asterisk-Users] CDRTool / asterisk billing based on realtime To: asterisk-users(a)lists.digium.com Cc: serusers(a)iptel.org Message-ID: <20060622155330.80131.qmail(a)web25515.mail.ukl.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 Hello, I read ag-projects it does'not provide support for its cdrtool pseudo gpl licensed . It's one of the bad open source project even seen . No documentation ... A real bad project !! Don't waste time with that Anybody could advise me a billing system based on cdr records with realtime support cdr_obdc.so? Regards Harry

18 years, 4 months

[Users] Can't rewritehostport to PSTN gateway

by Kenny Chua

Hi everybody, I'm having problems rewritehostport to PSTN gateway. It gives me the 403 Forbidden error. Here is the error: SEND TIME: 130027089 SEND >> ACK sip:0013373038435@test.com SIP/2.0 Via: SIP/2.0/UDP70.xxx.xxx.xxx:5060;rport;branch=z9hG4bK437FA12BFB124DA68EB569C02212327D From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com>;tag=eb9822f1ed1b15a932bf98c097b3aaca.befd Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9401 ACK Max-Forwards: 70 Content-Length: 0 SEND TIME: 130027095 SEND >> 70.xxx.xxx.xxx:5060 INVITE sip:0013373038435@test.com SIP/2.0 Via: SIP/2.0/UDP70.xxx.xxx.xxx:5060;rport;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com> Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Proxy-Authorization: Digest username="200",realm="test.com",nonce="44a21eb77c572fc09155f89521700490cb8a87ef",response="75921f5f225efeaeb0177e3353769190",uri="sip:0013373038435@test.com" Max-Forwards: 70 Content-Type: application/sdp User-Agent: X-Lite release 1105x Content-Length: 308 v=0 o=200 130026958 130027078 IN IP470.xxx.xxx.xxx s=X-Lite c=IN IP4 70.xxx.xxx.xxx t=0 0 m=audio 8000 RTP/AVP 0 8 3 98 97 101 a=rtpmap:0 pcmu/8000 a=rtpmap:8 pcma/8000 a=rtpmap:3 gsm/8000 a=rtpmap:98 iLBC/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv RECEIVE TIME: 130027172 RECEIVE << 70.xxx.xxx.xxx:5060 SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;rport=5060;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908;received=192.168.1.1 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Server: OpenSer (1.0.1 (i386/linux)) Content-Length: 0 Warning: 392 192.168.1.6:5060 "Noisy feedback tells: pid=4989 req_src_ip=192.168.1.1 req_src_port=5060 in_uri=sip:0013373038435@test.com out_uri=sip:13373038435@pstn.gateway:5060 via_cnt==1" RECEIVE TIME: 130027371 RECEIVE << 70.xxx.xxx.xxx:5060 SIP/2.0 403 Forbidden To: <sip:0013373038435@test.com>;tag=3360460030-876466 From: Kenny <sip:200@test.com>;tag=1187743606 Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 INVITE Contact: sip:13373038435@65.xxx.xxx.xxx:5060 Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;received=192.168.1.1;rport=5060;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 Content-Length: 0 SEND TIME: 130027372 SEND >>70.xxx.xxx.xxx:5060 ACK sip:0013373038435@test.comSIP/2.0 Via: SIP/2.0/UDP 70.xxx.xxx.xxx:5060;rport;branch=z9hG4bKF16D7EAC63D6463A8624A802F5BB4908 From: Kenny <sip:200@test.com>;tag=1187743606 To: <sip:0013373038435@test.com>;tag=3360460030-876466 Contact: <sip:200@70.xxx.xxx.xxx:5060> Call-ID: 67A1BB1A-C737-4C24-B7AF-19E9C92C2B47(a)192.168.1.30 CSeq: 9402 ACK Max-Forwards: 70 Content-Length: 0 ********************************Openser.cfg******************************************** debug=3 fork=yes log_stderror=no listen=192.168.1.6 alias=test.com port=5060 children=32 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); t_relay(); exit; } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { xlog("Does not have to tag, FORBIDDEN\n"); sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); xlog("Forcing rtpport\n"); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); xlog("Unforce RTP proxy2\n"); }; xlog("Dunno why forbidden\n"); sl_reply_error(); xlog("Forbidden4\n"); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); xlog("Setflag cos behind NAT\n"); } lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (uri=~"^sip:00[0-9]*@") { # International PSTN xlog("International PSTN\n"); strip(2); route(4); route(5); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); xlog("NAT Traversal Section\n"); } } route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- xlog("Routing to PSTN gateway\n"); rewritehostport("pstn.gateway:5060"); avp_write("i:45", "inv_timeout"); route(1); xlog("Routed to PSTN gateway\n"); } onreply_route[1] { if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { fix_nated_contact(); }; } --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

18 years, 4 months

[Users] Hung up problem

by raviprakash sunkara

Hi Users,,,, small issues in openser.. UAC 1 , UAC 2 are behind the NAT.. UAC 3 in NAT When I Make call UAC 2 <=================> UAC 1 , After 32 second its automatically hung up the Softphone. Same like .......... whe n UAC 1 <====================================> UAC 2 . When stranger interesting to all Users in OPENSER Developers in this world.. UAC 3 <============================> UAC 1 . it doesn't Hung up the phone But voice is not Hearing .. and UAC 1 <======================> UAC 3 its Hung up automatically ..... voice is clear... listening .. Where will be the problem either in softphone ( x-lite 3,0) or openser.cfgnat .... I thing the TM parameters is holding the Time . to process the call ... please help me................ -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

18 years, 4 months

[Serusers] Anyway to steal Media IP/Port from RTPProxy or MediaProxy

by Hoa Thai Duy

Hi List I want to get to c= and m= value after use_media_proxy or force_rtp_proxy (after real RTP flow between UA and media/rtpproxy) I want this in order to steal this pair of information, and bypass the RTPProxy/MediaProxy and use this information for UA to talk with other application server (eg. Asterisk) Pls. help Brgds

18 years, 4 months

[Serusers] compatibility with openser modules

by Andy Thomas

Does anyone know if I can use openser modules with ser? For example I would like to use the UAC module from openser in my ser 0.9.6 installation

18 years, 4 months

[Users] how i start AVPops module implementation

by Tanzeel serfaraz

Hi all users; plz help me out how can i start AVPops module implementation using OPENSER 1.0.0- thanks, Tanzeel --------------------------------- Sneak preview the all-new Yahoo.com. It's not radically different. Just radically better.

18 years, 4 months

← Newer
1
...
5
6
7
8
9
10
11
...
50
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2006