sr-users December 2007

sr-users@lists.kamailio.org

130 participants
235 discussions

[OpenSER-Users] loose_route not setting $du ??
by Patrick Baker 07 Dec '07

07 Dec '07

I'm having an issue with messages flowing between asterisk and openser and I believe the issue is related to loose_route and having nulls for $du $dd $ds. Does anyone know how to resolve this with my config? I have also referenced my asterisk config along with some debug information. Thanks in advance for anyone that can help! Asterisk ends up dropping the call after 20 seconds as it appears that openSer isnt responding to asterisk OK message. Also BYE's and others arent working as well.. … [View More] [Dec 7 04:45:55] WARNING[25642]: chan_sip.c:2334 retrans_pkt: Maximum retries exceeded on transmission 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 for seqno 8992 (Critical Response) [Dec 7 04:45:55] WARNING[25642]: chan_sip.c:2361 retrans_pkt: Hanging up call 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 - no reply to our critical packet. Really destroying SIP dialog '2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115' Method: INVITE ######################################################################## # This configuration is autogenerated by sip:wizard # (http://www.sipwise.com/wizard) on Fri Dec 07 05:52:34 +0100 2007 # for OpenSER 1.2 # # Copyright (C) 2007 Sipwise (support(a)sipwise.com) ######################################################################## ######################################################################## # By obtaining, using, and/or copying this configuration and/or its # associated documentation, you agree that you have read, understood, # and will comply with the Terms of Usage provided at # http://www.sipwise.com/news/?page_id=6 as well as the following # additions: # # Permission to use, copy, modify, and distribute this configuration and # its associated documentation for any purpose and without fee is hereby # granted, provided that the above copyright notice appears in all # copies, and that both that copyright notice and this permission notice # appear in supporting documentation, and that the name of Sipwise or # the author will not be used in advertising or publicity pertaining to # distribution of the configuration without specific, written prior # permission. ######################################################################## ######################################################################## # Before using this configuration, read the following prerequisites in # order to gain the designated functionallity: # # base: # You have to insert all locally served domains (i.e. # "openserctl domain add your.domain.com"). # # nat-rtpproxy: # You have to install RTPProxy # (http://www.openser.org/downloads/snapshots/rtpproxy/) for relaying # RTP traffic. # # offnet-pstn: # You have to add a routing entry for lcr (i.e. "openserctl lcr # addroute '' '' 1 1"). Additionally, you have to add your gateways # (i.e. "openserctl lcr addgw my-test-gw 1.2.3.4 5060 sip udp 1"). # ######################################################################## ######################################################################## # Configuration 'sip:wizard - Fri Dec 07 05:52:34 +0100 2007' ######################################################################## listen = udp:127.0.0.1:5060 listen = udp:10.3.1.31:5060 mpath = "/usr/local/lib/openser/modules" children = 8 debug = 3 fork = yes group = "openser" user = "openser" disable_tcp = no log_facility = LOG_DAEMON log_stderror = no tcp_children = 4 mhomed = no server_signature = yes sock_group = "openser" sock_mode = 0600 sock_user = "openser" unix_sock = "/tmp/openser.sock" unix_sock_children = 1 reply_to_via = no sip_warning = no check_via = no dns = no rev_dns = no disable_core_dump = no dns_try_ipv6 = yes dns_use_search_list = yes loadmodule "usrloc.so" modparam("usrloc", "user_column", "username") modparam("usrloc", "domain_column", "domain") modparam("usrloc", "contact_column", "contact") modparam("usrloc", "expires_column", "expires") modparam("usrloc", "q_column", "q") modparam("usrloc", "callid_column", "callid") modparam("usrloc", "cseq_column", "cseq") modparam("usrloc", "methods_column", "methods") modparam("usrloc", "flags_column", "flags") modparam("usrloc", "user_agent_column", "user_agent") modparam("usrloc", "received_column", "received") modparam("usrloc", "socket_column", "socket") modparam("usrloc", "use_domain", 0) modparam("usrloc", "desc_time_order", 0) modparam("usrloc", "timer_interval", 60) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("usrloc", "db_mode", 1) modparam("usrloc", "matching_mode", 0) modparam("usrloc", "cseq_delay", 20) modparam("usrloc", "nat_bflag", 6) loadmodule "textops.so" loadmodule "rr.so" modparam("rr", "enable_full_lr", 0) modparam("rr", "append_fromtag", 1) modparam("rr", "enable_double_rr", 1) modparam("rr", "add_username", 0) loadmodule "tm.so" modparam("tm", "fr_timer", 30) modparam("tm", "fr_inv_timer", 120) modparam("tm", "wt_timer", 5) modparam("tm", "delete_timer", 2) modparam("tm", "noisy_ctimer", 0) modparam("tm", "ruri_matching", 1) modparam("tm", "via1_matching", 1) modparam("tm", "unix_tx_timeout", 2) modparam("tm", "restart_fr_on_each_reply", 1) modparam("tm", "pass_provisional_replies", 0) loadmodule "xlog.so" modparam("xlog", "buf_size", 4096) modparam("xlog", "force_color", 0) loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("mi_fifo", "fifo_mode", 0660) modparam("mi_fifo", "fifo_group", "openser") modparam("mi_fifo", "fifo_user", "openser") modparam("mi_fifo", "reply_dir", "/tmp/") modparam("mi_fifo", "reply_indent", "\t") loadmodule "domain.so" modparam("domain", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 60) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "rtpproxy_disable", 0) modparam("nathelper", "rtpproxy_disable_tout", 60) modparam("nathelper", "rtpproxy_tout", 1) modparam("nathelper", "rtpproxy_retr", 5) modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "received_avp", "$avp(i:801)") loadmodule "sl.so" modparam("sl", "enable_stats", 1) loadmodule "uri.so" loadmodule "registrar.so" modparam("registrar", "default_expires", 3600) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 0) modparam("registrar", "default_q", 0) modparam("registrar", "append_branches", 1) modparam("registrar", "case_sensitive", 0) modparam("registrar", "received_param", "received") modparam("registrar", "max_contacts", 0) modparam("registrar", "retry_after", 0) modparam("registrar", "method_filtering", 0) modparam("registrar", "path_mode", 2) modparam("registrar", "path_use_received", 0) modparam("registrar", "received_avp", "$avp(i:801)") loadmodule "maxfwd.so" modparam("maxfwd", "max_limit", 256) loadmodule "mysql.so" modparam("mysql", "ping_interval", 300) modparam("mysql", "auto_reconnect", 1) loadmodule "auth.so" modparam("auth", "nonce_expire", 300) modparam("auth", "rpid_suffix", ";party=calling;id-type=subscriber;screen=yes") modparam("auth", "rpid_avp", "$avp(s:rpid)") loadmodule "auth_db.so" modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") modparam("auth_db", "password_column", "password") modparam("auth_db", "password_column_2", "ha1b") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "use_domain", 0) modparam("auth_db", "load_credentials", "rpid") loadmodule "uri_db.so" modparam("uri_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("uri_db", "uri_table", "uri") modparam("uri_db", "uri_user_column", "username") modparam("uri_db", "uri_domain_column", "domain") modparam("uri_db", "uri_uriuser_column", "uri_user") modparam("uri_db", "subscriber_table", "subscriber") modparam("uri_db", "subscriber_user_column", "username") modparam("uri_db", "subscriber_domain_column", "domain") modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "use_domain", 0) loadmodule "lcr.so" modparam("lcr", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("lcr", "gw_table", "gw") modparam("lcr", "gw_name_column", "gw_name") modparam("lcr", "ip_addr_column", "ip_addr") modparam("lcr", "port_column", "port") modparam("lcr", "uri_scheme_column", "uri_scheme") modparam("lcr", "transport_column", "transport") modparam("lcr", "grp_id_column", "grp_id") modparam("lcr", "lcr_table", "lcr") modparam("lcr", "strip_column", "strip") modparam("lcr", "prefix_column", "prefix") modparam("lcr", "from_uri_column", "from_uri") modparam("lcr", "priority_column", "priority") modparam("lcr", "gw_uri_avp", "1400") modparam("lcr", "ruri_user_avp", "1402") modparam("lcr", "contact_avp", "1401") modparam("lcr", "fr_inv_timer_avp", "s:fr_inv_timer_avp") modparam("lcr", "fr_inv_timer", 90) modparam("lcr", "fr_inv_timer_next", 30) modparam("lcr", "rpid_avp", "s:rpid") ######################################################################## # Request route 'main' ######################################################################## route[0] { xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); force_rport(); if(msg:len > max_len) { xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("513", "Message Too Big"); exit; } if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("483", "Too Many Hops"); exit; } if(!is_method("REGISTER")) { if(nat_uac_test("19")) { record_route(";nat=yes"); } else { record_route(); } } if(is_method("CANCEL") || is_method("BYE")) { unforce_rtp_proxy(); } if(loose_route()) { if(!has_totag()) { xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Initial Loose-Routing Rejected"); exit; } if(nat_uac_test("19") || search("^Route:.*;nat=yes")) { fix_nated_contact(); setbflag(6); } route(3); } if(is_method("REGISTER")) { route(2); } if(is_method("INVITE")) { route(4); } if(is_method("CANCEL") || is_method("ACK")) { route(8); } route(9); } ######################################################################## # Request route 'stop-rtp-proxy' ######################################################################## route[1] { if(isflagset(22)) { unforce_rtp_proxy(); } } ######################################################################## # Request route 'base-route-register' ######################################################################## route[2] { sl_send_reply("100", "Trying"); if(!www_authorize("", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setbflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); exit; } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Request route 'base-outbound' ######################################################################## route[3] { if(isbflagset(6)) { if(!isflagset(22) && !search("^Content-Length:[ ]*0")) { setflag(22); force_rtp_proxy(); } t_on_reply("2"); } else { t_on_reply("1"); } if(!isflagset(21)) { t_on_failure("2"); } if(isflagset(29)) { append_branch(); } if(is_present_hf("Proxy-Authorization")) { consume_credentials(); } xlog("L_INFO", "Request leaving server, D-URI='$du' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # no 100 (we already sent it) and no DNS blacklisting if(!t_relay("0x05")) { sl_reply_error(); if(is_method("INVITE") && isbflagset(6)) { unforce_rtp_proxy(); } } exit; } ######################################################################## # Request route 'base-route-invite' ######################################################################## route[4] { sl_send_reply("100", "Trying"); if(from_gw()) { xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); setflag(23); } else { if(!proxy_authorize("", "subscriber")) { xlog("L_INFO", "Proxy authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); proxy_challenge("", "0"); exit; } if(!check_from()) { xlog("L_INFO", "Spoofed From-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed From-URI Detected"); exit; } } if(nat_uac_test("19")) { fix_nated_contact(); setbflag(6); } route(5); } ######################################################################## # Request route 'invite-find-callee' ######################################################################## route[5] { if(!is_domain_local("$rd")) { setflag(20); route(7); } if(does_uri_exist()) { xlog("L_INFO", "Callee is local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(6); } else { xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); } exit; } ######################################################################## # Request route 'invite-to-internal' ######################################################################## route[6] { if(!lookup("location")) { xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Offline"); } else { xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(3); } exit; } ######################################################################## # Request route 'invite-to-external' ######################################################################## route[7] { if(isflagset(20)) { xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(3); exit; } if(!isflagset(23)) { # don't allow calls relaying from PSTN to PSTN, if not explicitely forwarded if(uri =~ "^sip:[0-9]+@") { # only route numeric users to PSTN if(!load_gws()) { xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } if(!next_gw()) { xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } setflag(21); t_on_failure("1"); route(3); } } xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Not Found"); exit; } ######################################################################## # Request route 'base-route-local' ######################################################################## route[8] { t_on_reply("1"); if(t_check_trans()) { xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(!t_relay()) { sl_reply_error(); } } else { xlog("L_INFO", "Dropping mis-routed request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } exit; } ######################################################################## # Request route 'base-route-generic' ######################################################################## route[9] { xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("501", "Method Not Supported Here"); exit; } ######################################################################## # Request route 'base-filter-failover' ######################################################################## route[10] { if(!t_check_status("408|500|503")) { xlog("L_INFO", "No failover routing needed for this response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(1); exit; } } ######################################################################## # Reply route 'base-standard-reply' ######################################################################## onreply_route[1] { xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Reply route 'base-nat-reply' ######################################################################## onreply_route[2] { xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); if(nat_uac_test("1")) { fix_nated_contact(); } if(isbflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if(!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); } } exit; } ######################################################################## # Failure route 'pstn-failover' ######################################################################## failure_route[1] { xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(10); if(!next_gw()) { xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(1); exit; } t_on_failure("1"); route(3); } ######################################################################## # Failure route 'base-standard-failure' ######################################################################## failure_route[2] { route(10); route(1); } ##asterisk sip.conf## [general] matchexterniplocally=yes canreinvite=no externip=xxx.206.xxx.136 localnet=10.3.1.0/255.255.255.0 context=default bindport=5061 bindaddr=0.0.0.0 sipdebug=yes nat=yes [openser] type=friend context=default insecure=very externalnotify=yes allow=all ##ser log## Dec 7 04:04:52 phonesys-slave openser[24602]: Request leaving server, D-URI='<null>' - M=INVITE RURI=sip:500@10.3.1.31:5061;transport=udp F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:04:52 phonesys-slave openser[24597]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:04:53 phonesys-slave openser[24602]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:04:54 phonesys-slave openser[24597]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:04:56 phonesys-slave openser[24602]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:00 phonesys-slave openser[24597]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:04 phonesys-slave openser[24602]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:08 phonesys-slave openser[24597]: Request leaving server, D-URI='<null>' - M=ACK RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:12 phonesys-slave openser[24589]: Request leaving server, D-URI='<null>' - M=BYE RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:13 phonesys-slave openser[24599]: Request leaving server, D-URI='<null>' - M=BYE RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 Dec 7 04:05:16 phonesys-slave openser[24597]: Request leaving server, D-URI='<null>' - M=BYE RURI=sip:500@167.206.216.136 F=sip:pbaker2@10.3.1.31 T=sip:500@10.3.1.31 IP=10.3.1.115 ID=62B37CB0-053C-17A2-7F0C-1E457AE94833(a)10.3.1.115 ##asterisk sip debug## <--- SIP read from 10.3.1.31:5060 ---> INVITE sip:500@10.3.1.31:5061;transport=udp SIP/2.0 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31> Contact: <sip:pbaker2@10.3.1.115:5060> Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE Max-Forwards: 69 Content-Type: application/sdp User-Agent: X-Lite release 1105d Content-Length: 252 v=0 o=pbaker2 3001829617 3001829777 IN IP4 10.3.1.115 s=X-Lite c=IN IP4 10.3.1.31 t=0 0 m=audio 35128 RTP/AVP 3 97 101 a=rtpmap:3 gsm/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=sendrecv a=nortpproxy:yes <-------------> --- (13 headers 12 lines) --- Sending to 10.3.1.31 : 5060 (no NAT) Using INVITE request as basis request - 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 No user 'pbaker2' in SIP users list Found peer 'openser' for 'pbaker2' from 10.3.1.31:5060 Found RTP audio format 3 Found RTP audio format 97 Found RTP audio format 101 Peer audio RTP is at port 10.3.1.31:35128 Found audio description format gsm for ID 3 Found audio description format speex for ID 97 Found audio description format telephone-event for ID 101 Capabilities: us - 0x27f9fff (g723|gsm|ulaw|alaw|g726|adpcm|slin|lpc10|g729|speex|ilbc|g726aal2|g722|slin16|jpeg|png|h261|h263|h263p|h264|mpeg4|t140), peer - audio=0x202 (gsm|speex)/video=0x0 (nothing)/text=0x0 (nothing), combined - 0x202 (gsm|speex) Non-codec capabilities (dtmf): us - 0x1 (telephone-event), peer - 0x1 (telephone-event), combined - 0x1 (telephone-event) Peer audio RTP is at port 10.3.1.31:35128 Looking for 500 in default (domain 10.3.1.31) list_route: hop: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> <--- Transmitting (no NAT) to 10.3.1.31:5060 ---> SIP/2.0 100 Trying Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31> Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Length: 0 <------------> Audio is at 167.206.216.136 port 37712 Adding codec 0x2 (gsm) to SDP Adding codec 0x200 (speex) to SDP Adding non-codec 0x1 (telephone-event) to SDP phonesys-slave*CLI> <--- Reliably Transmitting (no NAT) to 10.3.1.31:5060 ---> SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv <------------> Retransmitting #1 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- Retransmitting #2 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- Retransmitting #3 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- Retransmitting #4 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- Retransmitting #5 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- [Dec 7 04:45:50] NOTICE[25642]: rtp.c:998 process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: 10.3.1.31 Retransmitting #6 (no NAT) to 10.3.1.31:5060: SIP/2.0 200 OK Via: SIP/2.0/UDP 10.3.1.31;branch=z9hG4bK435c.95fa3e24.0;received=10.3.1.31 Via: SIP/2.0/UDP 10.3.1.115:5060;rport=5060;branch=z9hG4bK754BE4A264062E0954ADE98E18502A53 Record-Route: <sip:10.3.1.31;lr;ftag=1516093159;nat=yes> From: Patrick Baker <sip:pbaker2@10.3.1.31>;tag=1516093159 To: <sip:500@10.3.1.31>;tag=as70a2356d Call-ID: 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 CSeq: 8992 INVITE User-Agent: Asterisk PBX SVN-trunk-r91598 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: <sip:500@167.206.216.136> Content-Type: application/sdp Content-Length: 300 v=0 o=root 87430933 87430933 IN IP4 167.206.216.136 s=Asterisk PBX SVN-trunk-r91598 c=IN IP4 167.206.216.136 t=0 0 m=audio 37712 RTP/AVP 3 97 101 a=rtpmap:3 GSM/8000 a=rtpmap:97 speex/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv --- [Dec 7 04:45:55] WARNING[25642]: chan_sip.c:2334 retrans_pkt: Maximum retries exceeded on transmission 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 for seqno 8992 (Critical Response) [Dec 7 04:45:55] WARNING[25642]: chan_sip.c:2361 retrans_pkt: Hanging up call 2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115 - no reply to our critical packet. Really destroying SIP dialog '2825F5A8-334C-7B59-8EDA-4C0602180528(a)10.3.1.115' Method: INVITE [View Less]

2 2

[OpenSER-Users] starting openser trunk version
by Daniel 07 Dec '07

07 Dec '07

Hi all, I'm using the latest trunk version of openser. When I start the proxy I see on debug this messages repeated forever... I'm using a config file that worked well wiht openser release 1.2.2. Dec 6 15:55:14 [28924] DBG:core:qm_free: params(0x817ada0, 0x81caa24), called from nathelper.c: nh_timer(2941) Dec 6 15:55:14 [28924] DBG:core:qm_free: freeing frag. 0x81caa0c alloc'ed from nathelper.c: nh_timer(2841) Dec 6 15:55:15 [28924] DBG:core:qm_malloc: params (0x817ada0, 8), called from … [View More]

4 3

[Serusers] SER From Header
by Arun Kumar 07 Dec '07

07 Dec '07

Hi, I've one exten on my ser box and one exten on Broadsoft switch. From SER I'm not able to dial my broadsoft exten, b'coz broadsoft expect known user in >From filed but I'm calling from SER so the From filed shows my SER user not my broadsoft. So how do I change my From header when I call my broadsoft. Im using ser-0.9.6 version. Please help. Thanks, Arun

1 0

[OpenSER-Users] Accounting issues
by David Villasmil Govea 07 Dec '07

07 Dec '07

Hello all, I finally got accounting on db to work. I added a few extra fields and its all fine. But i have some questions: I added: modparam("acc", "db_extra", "from_uri=$fu ; to_uri=$tu ; from_user=$fU; source_ip=$si") to me config, and all the info gets loaded. BUT, source_ip is not always the ip from which the request was received, either that, or INVITES are not getting logged! well, that's really 2 questions in one... ;) here's my config: # # sample config file to be … [View More]used with nathelper/rtpproxy # # start RTPProxy with: rtpproxy -l your_public_ip -s udp:localhost:8899 # # ----------- global configuration parameters ------------------------ debug=2 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=20 disable_dns_blacklist=true # # --- module loading mpath="/usr/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "mi_fifo.so" loadmodule "dispatcher.so" #loadmodule "domain.so" loadmodule "xlog.so" loadmodule "/usr/lib/openser/modules/acc.so" modparam("acc", "early_media", 1) modparam("acc", "report_cancels", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_url", "mysql://openser:password@localhost/openser") modparam("acc", "report_ack", 0) modparam("acc", "db_missed_flag", 3) modparam("acc", "failed_transaction_flag", 4) modparam("acc", "db_extra", "from_uri=$fu ; to_uri=$tu ; from_user=$fU; source_ip=$si") # # CONSTANTS # # --- setting module parameters #modparam("domain","db_url","mysql://openser:password@localhost/openser") #modparam("domain", "db_mode", 1) #modparam("domain", "domain_table", "domain") #modparam("domain", "domain_col", "domain") modparam("xlog", "buf_size", 8192) # --- setting module parameters modparam("dispatcher", "list_file", "/etc/openser/dispatcher.list") # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc|auth_db","db_url","mysql://openser:password@localhost /openser") # -- usrloc params -- modparam("usrloc", "db_mode", 1) modparam("usrloc", "nat_bflag", 6) #modparam("usrloc", "use_domain", 0) # -- registrar params -- modparam("registrar|nathelper", "received_avp", "$avp(i:42)") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") #modparam("auth_db", "use_domain", 0) # -- rr params -- #modparam("rr", "enable_full_lr", 1) # -- nathelper modparam("nathelper", "rtpproxy_sock", "udp:1.2.3.4:8899") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@sip.whatever.com") #modparam("registrar", "max_contacts", 1) # --- main routing logic route{ if (method=="INVITE") { xlog("L_NOTICE", "INVITE MESSAGE RECEIVED - START ACC\n"); setflag(2); setflag(3); setflag(4); }; if (method=="BYE") { xlog ("L_NOTICE", "BYE - STOP ACCOUNTING\n"); setflag(2); setflag(3); setflag(4); }; if (method=="CANCEL") { xlog ("L_NOTICE", "CANCEL - STOP ACCOUNTING\n"); setflag(2); setflag(3); setflag(4); }; if (method=="REGISTER") { setflag(2); setflag(3); setflag(4); }; if (!mf_process_maxfwd_header("100")) { sl_send_reply("483","Too Many Hops"); exit; }; #if (msg:len >= 2048 ) { # sl_send_reply("513", "Message too big"); # exit; #}; # NAT detection route(2); if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # if (!is_uri_host_local() ) { append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { xlog("L_NOTICE", "\nNew Registration\n"); if (!www_authorize("sip.whatever.com", "subscriber")) { xlog("L_NOTICE", "\nRegistration FAILED! CLIENT: $au\n"); www_challenge("sip.whatever.com", "0"); exit; }; if (isflagset(5)) { xlog("L_NOTICE", "\nRegistration OK\n"); setbflag(6); # if you want OPTIONS natpings uncomment next # setbflag(7); }; save("location"); exit; }; }; route(1); } route[1] { xlog("L_NOTICE", "\n**************IN ROUTE 1************\n"); if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } failure_route[1] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } #======================================= Thanks in advance! Any other comment to make this cfg better, i'm all ears!! David [View Less]

1 0

[OpenSER-Users] Make uninstall
by Daniel 07 Dec '07

07 Dec '07

Hi all, I have to uninstall openser from my pc. Is there a "make uninstall" ? Regerds, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com

3 2

[OpenSER-Users] Problem with Mediaproxy
by Daniel 07 Dec '07

07 Dec '07

Dear all, I'm testing my proxy and I'm using mediaproxy for natted client. Everything works fine, if there is a client behind nat calling a public user, mediaproxy works fine. This is true also if there is a public client calling a natted user. I have some problem when there are 2 client behind NAT. 1. I tryed to test the system with 1 client behind NAT and 1 client behind the SAME NAT (both of client under the same subnet:192.168.10.x). In this case Mediaproxy doesn't work. RTP in … [View More]direct between clients. 2. I tryed to test the system with 1 client behind NAT and 1 client behind the SAME NAT (with clients under different subnet:192.168.10.x and 192.168.0.x). In this case Mediaproxy doesn't work. RTP in direct between clients. This is Mediaproxy Debug in the last case: ********************************************** Dec 7 10:37:36 SERVER mediaproxy[2116]: request ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI. 192.168.0.167:58786:audio NAT_IP PROXY_IP remote NAT_IP remote X-Lite=20release=201011s=20stamp=2041150 info=from:userA@PROXY_IP, to:UserB@PROXY_IP,fromtag:c1310701,totag: Dec 7 10:37:36 SERVER mediaproxy[2116]: session ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI.: started. listening on MEDIAPROXY_IP:60014 Dec 7 10:37:36 SERVER mediaproxy[2116]: execution time: 1.56 ms Dec 7 10:37:43 SERVER mediaproxy[2116]: lookup ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI. 192.168.10.224:25732:audio NAT_IP PROXY_IP remote unknown unknown X-Lite=20release=201011s=20stamp=2041150 info=from:UserA@PROXY_IP, to:UserB@PROXYIP,fromtag:c1310701,totag:67246350 Dec 7 10:37:43 SERVER mediaproxy[2116]: execution time: 0.51 ms Dec 7 10:38:00 SERVER mediaproxy[2116]: delete ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI. info= Dec 7 10:38:00 SERVER mediaproxy[2116]: session ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI.: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) Dec 7 10:38:00 SERVER mediaproxy[2116]: session ZDhiMWM2NDhmNzQ1ODNjYThkZjIxZGNiMmEzZmQxMjI.: ended. Dec 7 10:38:00 SERVER mediaproxy[2116]: execution time: 0.61 ms ******************************* I am sure of mediaproxy change SDP parameter even in these last cases (I can see on openser debug that proxy send out, for example, a 200 OK with SDP part changed. And xlogs DEBUG show me that openser enters in "use_media_proxy" routine) . But when I sniff the packet on client side, I see SDP part with private IP ! Any suggestion? Regards, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com [View Less]

3 2

[OpenSER-Users] T.38 Fax Problem with RTPProxy
by Raymond Chandler 07 Dec '07

07 Dec '07

In the following, I have a T.38 Fax call in which I'm forcing RTPProxy. The signalling follows this draft (http://tools.ietf.org/html/draft-mule-sip-t38callflows-02#section-5.2), but the UDPTL media seems to have problems. The problem is that OpenSER/RTPProxy seems to ignore the address in the SDP of the "200 OK". As I understand it, RTPProxy should, adequately enough, proxy the UDPTL. (not just rtp) The call flow is as follows: UC -> EDGE EDGE -> OpenSER … [View More] OpenSER -> EU (not shown in this trace) NOTE: IPs have been changed to protect the innocent ;-) 192.168.174.156 represents our UC's (Underlying Carrier's) IP 192.168.48.88 represents our edge proxy 192.168.202.10 represents our OpenSER box Below, I have what I consider to be the "relevent" packets with large portions of repetition SNIP'd.... Below that, I have the two (again, what I consider to be) relevent packets with details of the SDP In both of the SDP details, our edge uses the UC's IP (192.168.174.156) in the c= line of the SDP. I don't see that being overwritten in any of the "media-specific" sections following. OpenSER/RTPProxy handle the RTP appropriately (to the best of my knowledge) but send the t.38 UDPTL media back to our edge which is, of course, rejecting it. "No.", "Time", "Source", "Destination", "Protocol", "Info" "1", "0.000000", "192.168.48.88", "192.168.202.10", "SIP/SDP", "Request: INVITE sip:1NPANXX0119@192.168.202.10:6080, with session description" "2", "0.005027", "192.168.202.10", "192.168.48.88", "SIP", "Status: 100 Trying" "3", "0.286018", "192.168.202.10", "192.168.48.88", "SIP", "Status: 180 Ringing" "4", "9.397591", "192.168.202.10", "192.168.48.88", "SIP/SDP", "Status: 200 OK, with session description" "5", "9.410633", "192.168.202.10", "192.168.48.88", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3122798450, Seq=5169, Time=374804094" "6", "9.439195", "192.168.48.88", "192.168.202.10", "SIP", "Request: ACK sip:1NPANXX0119@192.168.202.10:6080" "7", "9.440987", "192.168.202.10", "192.168.48.88", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3122798450, Seq=5170, Time=374804334" "8", "9.448560", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "9", "9.470710", "192.168.202.10", "192.168.48.88", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3122798450, Seq=5171, Time=374804574" "10","9.479789","69.25.48.88","67.15.202.10","ICMP","Destination unreachable (Port unreachable)" "11","9.490158","207.218.174.156","67.15.202.10","RTP","PT=ITU-T G.711 PCMU, SSRC=0xCF806328, Seq=0, Time=0, Mark " "12","9.500186","67.15.202.10","207.218.174.156","RTP","PT=ITU-T G.711 PCMU, SSRC=0xBA221F72, Seq=5172, Time=374804814 " "13","9.509146","69.25.48.88","67.15.202.10","ICMP","Destination unreachable (Port unreachable)" "14","9.510270","207.218.174.156","67.15.202.10","RTP","PT=ITU-T G.711 PCMU, SSRC=0xCF806328, Seq=1, Time=160 " "15","9.530265","207.218.174.156","67.15.202.10","RTP","PT=ITU-T G.711 PCMU, SSRC=0xCF806328, Seq=2, Time=320 " "16","9.530283","67.15.202.10","207.218.174.156","RTP","PT=ITU-T G.711 PCMU, SSRC=0xBA221F72, Seq=5173, Time=374805054 " ~~~~ SNIP ~~~~ "174", "11.430039", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=97, Time=15520" "175", "11.450027", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=98, Time=15680" "176", "11.457118", "192.168.202.10", "192.168.48.88", "SIP/SDP", "Request: INVITE sip:Restricted@192.168.48.88, with session description" "177", "11.468025", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "178", "11.470013", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=99, Time=15840" "179", "11.490125", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=100, Time=16000" "180", "11.492010", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "181", "11.499118", "192.168.48.88", "192.168.202.10", "SIP", "Status: 100 Trying" "182", "11.510111", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=101, Time=16160" "183", "11.515999", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "184", "11.530100", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=102, Time=16320" "185", "11.540998", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "186", "11.550087", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=103, Time=16480" "187", "11.570073", "192.168.174.156", "192.168.202.10", "RTP", "Payload type=ITU-T G.711 PCMU, SSRC=3481297704, Seq=104, Time=16640" "188", "11.580068", "192.168.174.156", "192.168.202.10", "RTP", "Unknown RTP version 0" "189", "11.581986", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "190", "11.590061", "192.168.174.156", "192.168.202.10", "RTP", "Unknown RTP version 0" "191", "11.599929", "192.168.174.156", "192.168.202.10", "RTP", "Unknown RTP version 0" "192", "11.605977", "192.168.202.10", "192.168.174.156", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "193", "11.608549", "192.168.48.88", "192.168.202.10", "SIP/SDP", "Status: 200 OK, with session description" "194", "11.630936", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "195", "11.660168", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "196", "11.668760", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "197", "11.690405", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "198", "11.697992", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "199", "11.720762", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "200", "11.728847", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "201", "11.750120", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 [UNKNOWN PER: unknown choice extension][Malformed Packet]" "202", "11.758827", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "203", "11.780601", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 t30ind: no-signal hdlc-fcs-BAD-sig-end t4-non-ecm-sig-end [Malformed?] hdlc-fcs-BAD-sig-end hdlc-data[Malformed Packet]" "204", "11.788059", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "205", "11.811073", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 t30ind: no-signal hdlc-fcs-BAD-sig-end t4-non-ecm-sig-end [Malformed?] hdlc-fcs-BAD-sig-end hdlc-sig-end[Malformed Packet]" "206", "11.818665", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "207", "11.833039", "192.168.202.10", "192.168.48.88", "SIP", "Request: ACK sip:Restricted@192.168.48.88:5060" "208", "11.839935", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=32768 t30ind: cng hdlc-fcs-BAD-sig-end t4-non-ecm-sig-end [Malformed?] hdlc-fcs-BAD-sig-end hdlc-fcs-OK[Malformed Packet]" "209", "11.849145", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "210", "11.868409", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=00000 t30ind: no-signal" "211", "11.878000", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "212", "11.905983", "192.168.48.88", "192.168.202.10", "ICMP", "Destination unreachable (Port unreachable)" "213", "14.428661", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=00001 t30ind: v21-preamble" ~~~~ SNIP ~~~~ "389", "32.869453", "192.168.202.10", "192.168.48.88", "T.38", "UDP: UDPTLPacket Seq=00114 t30ind: no-signal" "390", "41.696978", "192.168.202.10", "192.168.48.88", "SIP", "Request: BYE sip:Restricted@192.168.48.88:5060" "391", "41.738094", "192.168.48.88", "192.168.202.10", "SIP", "Status: 200 OK" No. Time Source Destination Protocol Info 1 0.000000 192.168.48.88 192.168.202.10 SIP/SDP Request: INVITE sip:1NPANXX0119@192.168.202.10:6080, with session description Frame 1 (966 bytes on wire, 966 bytes captured) Ethernet II, Src: 00:1e:13:ca:4a:3f (00:1e:13:ca:4a:3f), Dst: Dell_ed:4a:1c (00:12:3f:ed:4a:1c) Internet Protocol, Src: 192.168.48.88 (192.168.48.88), Dst: 192.168.202.10 (192.168.202.10) User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 6080 (6080) Session Initiation Protocol Request-Line: INVITE sip:1NPANXX0119@192.168.202.10:6080 SIP/2.0 Message Header Message body Session Description Protocol Session Description Protocol Version (v): 0 Owner/Creator, Session Id (o): BRSDP 187392 187392 IN IP4 192.168.174.156 Session Name (s): BRSDP Session Connection Information (c): IN IP4 192.168.174.156 Time Description, active time (t): 0 0 Media Description, name and address (m): audio 53278 RTP/AVP 0 8 18 100 Media Attribute (a): rtpmap:0 PCMU/8000 Media Attribute (a): rtpmap:8 PCMA/8000 Media Attribute (a): rtpmap:18 G729/8000 Media Attribute (a): rtpmap:100 telephone-event/8000 Media Attribute (a): fmtp:100 0-15 No. Time Source Destination Protocol Info 193 11.608549 192.168.48.88 192.168.202.10 SIP/SDP Status: 200 OK, with session description Frame 193 (1013 bytes on wire, 1013 bytes captured) Ethernet II, Src: 00:1e:13:ca:4a:3f (00:1e:13:ca:4a:3f), Dst: Dell_ed:4a:1c (00:12:3f:ed:4a:1c) Internet Protocol, Src: 192.168.48.88 (192.168.48.88), Dst: 192.168.202.10 (192.168.202.10) User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 6080 (6080) Session Initiation Protocol Status-Line: SIP/2.0 200 OK Message Header Message body Session Description Protocol Session Description Protocol Version (v): 0 Owner/Creator, Session Id (o): BRSDP 187392 187393 IN IP4 192.168.174.156 Session Name (s): BRSDP Session Connection Information (c): IN IP4 192.168.174.156 Time Description, active time (t): 0 0 Media Description, name and address (m): image 53278 udptl t38 Media Attribute (a): T38FaxVersion:0 Media Attribute (a): T38MaxBitRate:14400 Media Attribute (a): T38FaxRateManagement:transferredTCF Media Attribute (a): T38FaxMaxBuffer:262 Media Attribute (a): T38FaxMaxDatagram:176 Media Attribute (a): T38FaxUdpEC:t38UDPRedundancy [View Less]

1 0

[OpenSER-Users] Does MediaProxy have to be loaded if there is no NAT?
by Brian Heath 07 Dec '07

07 Dec '07

So I'm trying to diagnose an intermittent bug we seem to be having, and I'm not sure if Mediaproxy's the cause or not... When a call is made through our system, and then the call is ended normally, the logs show the following mediaproxy entries: Dec 6 12:14:02 server01 mediaproxy[14777]: delete 7dfafbf931195f8b61d7bbea68f9c0f8(a)xxx.xxx.xxx.xx1 info= Dec 6 12:14:02 server01 mediaproxy[14777]: execution time: 0.20 ms It seems to be pretty standard stuff, really. However, if a call is not … [View More]

2 1

Re: [OpenSER-Users] starting openser trunk version
by Daniel 06 Dec '07

06 Dec '07

On Thursday 06 December 2007, Daniel wrote: > I'm using the latest trunk version of openser. > When I start the proxy I see on debug this messages repeated forever... > I'm using a config file that worked well wiht openser release 1.2.2. > > Dec 6 15:55:14 [28924] DBG:core:qm_free: params(0x817ada0, 0x81caa24), > called from nathelper.c: nh_timer(2941) > Dec 6 15:55:14 [28924] DBG:core:qm_free: freeing frag. 0x81caa0c alloc'ed > from nathelper.c: nh_timer(2841) > … [View More]

1 0

[OpenSER-Users] OpeSer SVN presence error
by TCB 06 Dec '07

06 Dec '07

I'm trying to setup openser-svn-3261 with presence support and gettign the following error. Dec 5 18:04:27 ss-za /usr/local/sbin/openser[7403]: Handle PUBLISH Dec 5 18:04:27 ss-za /usr/local/sbin/openser[7403]: ERROR:presence:handle_publish: Missing or unsupported event header field value Dec 5 18:04:27 ss-za /usr/local/sbin/openser[7403]: ERROR:presence:handle_publish: event=[presence I'm also having issues starting Oser with presence_xml module, its crashes with no error in my log. … [View More]

3 3

← Newer
1
...
16
17
18
19
20
21
22
23
24
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2007