sr-users December 2007

sr-users@lists.kamailio.org

130 participants
235 discussions

[OpenSER-Users] FreeRADIUS-CDRTool Prepaid Connector 1.1 Released
by Dan-Cristian Bogos 06 Dec '07

06 Dec '07

Folks, for any of you using (or having interest in using) prepaid authentication based on CDRTool through FreeRADIUS Authorization methods, I announce the release 1.1 available to be downloaded from SourceForge.net. Changelog from version 1.0 to present: !Version 1.1 - 05.12.2007 by Dan-Cristian Bogos [dan(a)itsyscom.com] * Replaced MAXDUR setting with SESSION_MAXDUR to be more descriptive * Introducing experimental support for multiple cdrtool engines by setting MULTIPLE_PREPAID_ENGINES=… [View More]

3 3

[Serusers] mailbox
by Szasz Szabolcs 06 Dec '07

06 Dec '07

Hello! I'm new in SEMS, I have a problem using mailbox application. I have set up mailbox to use the same imap mailbox to store the messages and mailbbox_query to get from there the messages, it works in this way. 1. We have two numbers: 200 and 201, respectivelly we have imap subfolders inbox/200/ and inbox/201/. 200 calls 201, 201 isn't online, sems records a message and I want to put in 201's imap subfulder this message. 2. when 201 is calling the mailbox_query I would like to be able to … [View More]

1 0

Re: [Serusers] myself value
by franz.edler＠inode.at 06 Dec '07

06 Dec '07

> So why do I receive icmp response on sip register request. If ser built > properly the myself value it should know that "new" > myselfxxx.xxx.xxx.xxxx:5066 and to take care or requests he receives on > port 5066 on sip level Two questions: 1. Are the ICMP responses generated by requests destined to port 5066? 2. Did you set the port directive accordingly in ser.cfg? Franz

1 0

[Serusers] SIP Express Bundle ready-to-go idea, request for input
by Greger V. Teigre 06 Dec '07

06 Dec '07

Hi guys, I have been playing with the following idea: Create a ready-to-run OS image with everything that is needed for iptel.org apps pre-installed + a complete installation of: * SER 2.0 (release) * rtpproxy * SEMS * SERweb * maybe sipsak, some monitoring tools, etc The idea is to create a small script 'config_iptelorg' for configuring the installation to your needs. You should then be able to download the ready image, boot it, go through the script and have an up and running iptel.org … [View More]

7 6

[OpenSER-Users] force_tcp_alias
by Johnny Karlsen 06 Dec '07

06 Dec '07

There are numerous discussion on using force_tcp_alias() in order to route all SIP requests over an already established TCP between the client and OpenSER, however, I cannot make it work. What I would like to accomplish, any client registering using TCP should have all SIP requests sent towards the client using the already established TCP and not routed based on the Contact header used during REGISTER. Reading posts it would seem that putting force_tcp_alias(); within the route{ } … [View More]

2 2

[Serusers] myself value
by Evgeny Miloslavsky 06 Dec '07

06 Dec '07

Hi I'm kind of newbie at all the SER issue so sorry for bothering you with my questions. I defined at ser.cfg to listen on port 5066 instead of default 5060 port, saved changes and restarted the SER. At Wireshark sniffer I see that there is an ICMP--> Destination Port Unreachable response on all sip REGISTER requests arrived from various endpoints at my setup. As far as I understand this means that configured 5066 port is not bound with SER application. So my question is: where … [View More]

2 1

[OpenSER-Users] update trunk version
by Daniel 06 Dec '07

06 Dec '07

Hi, I'm trying to compile the latest trunk version of cpl-c module. I used the following commands: make make modules=modules/cpl-c modules but I had these errors: Compiling cpl.c gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -ftree-vectorize -mtune=athlon64 -DNAME='"openser"' -DVERSION='"1.2.2-notls"' -DARCH='"i386"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.1"' -D__CPU_i386 -D__OS_linux -D__SMP_yes -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -… [View More]DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DSTATISTICS -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -I/usr/include/libxml2 -I/usr/local/include/libxml2 -I/usr/local/include -c cpl.c -o cpl.o cpl.c:52:24: error: ../../pvar.h: No such file or directory cpl.c:118: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'cpl_procs' cpl.c:129: warning: excess elements in struct initializer cpl.c:129: warning: (near initialization for 'cmds[0]') cpl.c:131: warning: excess elements in struct initializer cpl.c:131: warning: (near initialization for 'cmds[1]') cpl.c:133: warning: excess elements in struct initializer cpl.c:133: warning: (near initialization for 'cmds[2]') cpl.c:134: warning: excess elements in struct initializer cpl.c:134: warning: (near initialization for 'cmds[3]') cpl.c:183: error: 'cpl_procs' undeclared here (not in a function) cpl.c:184: warning: initialization from incompatible pointer type cpl.c:185: warning: initialization from incompatible pointer type cpl.c:186: warning: initialization from incompatible pointer type cpl.c:188: warning: excess elements in struct initializer cpl.c:188: warning: (near initialization for 'exports') cpl.c: In function 'fixup_cpl_run_script': cpl.c:202: warning: implicit declaration of function 'LM_ERR' cpl.c: In function 'cpl_init': cpl.c:233: error: 'pv_spec_t' undeclared (first use in this function) cpl.c:233: error: (Each undeclared identifier is reported only once cpl.c:233: error: for each function it appears in.) cpl.c:233: error: expected ';' before 'avp_spec' cpl.c:237: warning: implicit declaration of function 'LM_INFO' cpl.c:241: warning: implicit declaration of function 'LM_CRIT' cpl.c:260: warning: implicit declaration of function 'pv_parse_spec' cpl.c:260: error: 'avp_spec' undeclared (first use in this function) cpl.c:261: error: 'PVT_AVP' undeclared (first use in this function) cpl.c:266: warning: implicit declaration of function 'pv_get_avp_name' cpl.c:353: warning: implicit declaration of function 'LM_NOTICE' make[1]: *** [cpl.o] Error 1 make[1]: Leaving directory `/usr/src/openser-1.2.2-notls/modules/cpl-c' make: *** [modules] Error 2 what's the problem? regards, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com [View Less]

3 3

[OpenSER-Users] CPL Errors
by Daniel 05 Dec '07

05 Dec '07

Hi all, What does this error means ? It occurs only when I call a CPL script af a natted User. Refer to OUTGOING CPL Script: 4(9914) ERROR:cpl_c: overflow detected ip=0xb608fa30 offset=506 in func. cpl_run.c, line 1000 4(9914) ERROR: t_reply: cannot send a t_reply to a message for which no T-state has been established Refer to INCOMING CPL Script: 4(9914) ERROR:cpl_c:cpl_proxy_to_loc_set: do_action failed 4(9914) ERROR:cpl_c:cpl_run_script: runtime error Regards, daniel -- Daniel Grotti … [View More]

3 2

[OpenSER-Users] Openser is giving compile errors for avp_write and avp_pushto
by Sandeep Ammaladinna 05 Dec '07

05 Dec '07

Hi Henning, I commented out the "fifo" part and still the config file errs. When i tried with openser -c option it says, config file OK. But when I actually run the openser it cribs. Attached is the log file. Cheers, -Sandeep -----Original Message----- From: users-bounces(a)lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf Of users-request(a)lists.openser.org Sent: Wednesday, December 05, 2007 5:30 PM To: users(a)lists.openser.org Subject: Users Digest, Vol 31, Issue … [View More]11 Send Users mailing list submissions to users(a)lists.openser.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.openser.org/cgi-bin/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-request(a)lists.openser.org You can reach the person managing the list at users-owner(a)lists.openser.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Users digest..." Today's Topics: 1. configure openser with cpl module (Martin Kardi) 2. Re: Proxy with OpenSER (Andreas M.) 3. Openser is giving compile errors for avp_write and avp_pushto (Sandeep Ammaladinna) 4. Re: Openser is giving compile errors for avp_write and avp_pushto (Henning Westerholt) 5. Re: uac_replace_from issues (Henning Westerholt) 6. Could someone help me with WeSIP ? (Daniel Grotti) ---------------------------------------------------------------------- Message: 1 Date: Tue, 4 Dec 2007 04:15:18 -0800 (PST) From: Martin Kardi <martin.kardos(a)pego.sk> Subject: [OpenSER-Users] configure openser with cpl module To: users(a)lists.openser.org Message-ID: <14149601.post(a)talk.nabble.com> Content-Type: text/plain; charset=us-ascii Hi, I installed openser with cpl module and other dependencies but I don't know how to configure it? Openser is functionally without cpl module. I am beginner in this. Could somebody help me how to? thanks Martin -- View this message in context: http://www.nabble.com/configure-openser-with-cpl-module-tf4942775.html#a 14149601 Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com. ------------------------------ Message: 2 Date: Wed, 05 Dec 2007 08:57:33 +0100 From: "Andreas M." <openser(a)breitenlee.net> Subject: Re: [OpenSER-Users] Proxy with OpenSER To: openser list user <users(a)lists.openser.org> Message-ID: <475659ED.9060809(a)breitenlee.net> Content-Type: text/plain; charset=ISO-8859-1 Hello, an IMS P-CSCF is not just a Proxy, there are a lot of routines and functions inside, that could not be done with an IETF SIP Proxy. Take a look at www.openimscore.org, there are also config examples, based on SER. r, Andreas M. hammou moujane schrieb: > Hello everybody, > > I am new in this mailing list and new user of OpenSER. I would like to > know where can I find the doc which can help me to make OpenSER as a > proxy server like P-CSCF of IMS core. what to be modified in > openser.conf configuration file. > > > > Bests Regards. > -- > Hammou MOUJANE > Tel: +212 62 46 33 89 > INPT > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users -- g, Andreas M. ------------------------------ Message: 3 Date: Wed, 5 Dec 2007 14:13:11 +0530 From: "Sandeep Ammaladinna" <sammaladinna(a)velankani.com> Subject: [OpenSER-Users] Openser is giving compile errors for avp_write and avp_pushto To: <users(a)lists.openser.org>, <devel(a)lists.openser.org> Message-ID: <001b01c8371a$e14dd170$1010000a(a)blr.velankani.com> Content-Type: text/plain; charset="us-ascii" Hi, When I am compiling my openser.cfg, Openser is throwing errors for avp_write and avp_pushto. The syntax I am using is as follows: avp_write("$ruri", "i:10"); avp_pushto("$ruri", "i:10"); What could be the issue; I am following the syntax from the cook book. Attached is my .cfg Thanks in advance. Cheers -Sandeep [View Less]

2 1

[OpenSER-Users] Openser is giving compile errors for avp_write and avp_pushto
by Sandeep Ammaladinna 05 Dec '07

05 Dec '07

Hi, When I am compiling my openser.cfg, Openser is throwing errors for avp_write and avp_pushto. The syntax I am using is as follows: avp_write("$ruri", "i:10"); avp_pushto("$ruri", "i:10"); What could be the issue; I am following the syntax from the cook book. Attached is my .cfg Thanks in advance. Cheers -Sandeep

3 2

← Newer
1
...
17
18
19
20
21
22
23
24
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2007