sr-users August 2014

sr-users@lists.kamailio.org

73 participants
131 discussions

Kamailio - Asterisk, problem with SIP trunk mode
by Mickael MONSIEUR 02 Dec '15

02 Dec '15

Hello, First, i have 7 years experience with Asterisk, but I started a project with Kamailio, forgive me in advance if I say silly things...! ;-) I set up a classic Asterisk / Kamailio configuration: sip phones -> kamailio -> asterisk -> sip trunks/pstn. When a call comes from the PSTN side, if I configure Asterisk as follows: [012345678] type = friend username = 012345678 secret = xxxxxxx host = dynamic fromdomain = sip.mydomain.com fromuser = 012345678 Standard mode: exten => 012345678, 1, Dial(SIP/012345678) -> The call is redirected on the phone by Kamailio ! :-) ------------------------------------------------------------------------------------------------------------------------------------------------ Trunk mode: [mytrunk] type = friend username = mytrunkUser secret = xxxxxxx host = dynamic fromdomain = sip.mydomain.com fromuser = mytrunkUser exten => 012345678, 1, Dial(SIP/mytrunk/012345678) -> The call is rejected by Kamailio.... exten => 012345679, 1, Dial(SIP/mytrunk/012345679) -> The call is rejected by Kamailio .... My question is how to allow the routing of multiple numbers (trunk mode) in a SIP account with Kamailio? Best regards, Mickael

3 6

Kamailio IMS - VM
by Bruno Cruz 17 Nov '15

17 Nov '15

Hello everyone, My name is Bruno, I'm a student from Portugal studying IMS at the moment. I've been following tutorials online, trying to get Kamailio to work as an IMS core - I'm pretty much a newbie in this field. Unfortunantly I've been getting several errors and I can't seem to properly configure everything. I was wondering if there is a All-in-One VM that can be downloaded, with Kamailio ready to be used as an IMS core? Thanks in advance. Best regards, Bruno C.

4 8

[Kamailio-Users] HA+DRBD setup
by Siddhardha Garige 09 Jul '15

09 Jul '15

Hello all, Just wondering if anyone know any tutorial on setting up HA+DRBD solution for kamailio. Especially creating partitions, DRBD devices and mount points. Thanks in advance, -Sid "May the light be with you." ______________________________________________ Siddhardha Garige www.luminepixels.com

11 24

Kamailio: MI Command: 'trusted_dump' and 'trusted_reload'
by José Luis Millán 22 Apr '15

22 Apr '15

Hi, I'm using 'allow_trusted()' from Permissions module without a problem in a Kamailio 4.0 routing logic. It does just work, but the MI command 'trusted_dump' tells me that the module is not in use: ''' server:/home/jmillan# kamctl fifo trusted_dump 500 Trusted-module not in use ''' Doing a 'trusted_reload' does neither make any query to database to retrieve the data. Other MI commands of same module do work correctly. ie: 'address_reload' or 'address_dump' Note: I have tested in a Kamailio 1.5 and the result is the same. Regards. -- José Luis Millán

4 3

File transferring issue
by Wingsravi R 25 Mar '15

25 Mar '15

Dear Kamailio'ns, I am working on kamailio Server (V 4.0) installed on Ubuntu 12.04 system. Currently i am trying file transfer feature using IMSDroid SIP clients. file transferring is fine between two IMSDroid clients but at the receiving end (file recipient) i cont see the sender identity/ sender name. it is just displaying as 'null' (Screen shot is attached). But the full file is transferring to destination address without any problem. I have configured MSRP module related script in my kamailio configuration file (find the attachment). but i guess it is not invoking anyway when file transferring and the file transferring is negotiating client-to-client basis. And also find Sip capture of file transfer (ngrep based) for better understanding. What could be the problem? Why at the file recipient side it is not displaying sender's identity (instead it is 'null')? how can i resolve this issue? Anyone please help me in resolving this issue. Any help will greatly appreciate. Regards, Ravi.

5 6

gruu within dialog
by samuel 29 Jan '15

29 Jan '15

Hi all, I'm having some issues treating requests within dialogs with gruu enabled with kamailio 4.1.2. I've got the "standard" configuration of WITHIN route with the adition of the next lines: if(is_gruu()){ route(LOCATION); }; before the the RELAY route call in the loose_route section. The "problem" is that the ACK with a pub-gruu on the Req-URI is not properly lookup. In the logs I can see the following statements: 2(4232) DEBUG: registrar [lookup.c:123]: lookup(): looking up pub gruu [urn:uuid:d63b1c4f-d7dc-4f4e-87f1-948123266dc0] 2(4232) DEBUG: registrar [lookup.c:158]: lookup(): 'sam(a)A.B.C.D' Not found in usrloc Where A.B.C.D is the local IP of the UA. Looking at the code, this last line looks like is looking for the "standard" URI (username@domain) instead of using the pub gruu. Am I right with this assumption or am I missing something from the code? As far as I could look, it looks like there's an exit -1 statement in the line 158 of lookup.c which disables the following gruu treatment. Since the username with IP is not registered, this ACK is lost and the sesion is not stablished (lost ACK). Can anyone provide some hints why is this failing? Thanks a lot in advance! Samuel.

3 8

Fwd: Need a support for Siremis and kamailio server
by Gaurav Rai 14 Jan '15

14 Jan '15

Hi I am using a siremis and *kamailio * hosted server with lylix.net and they give a link for getting a support about Siremis. I need a support to how to make OUT call on PSTN with registered subscriber on Softphone. Currently we have registered user on subscriber table with their location and can make a PEER to PEER audio call and text messaging also. To make OUT call on PSTN we had create a LCR gateway and LCR rule with Prefix but still can not make a OUT call getting a error 404 can u please help me out to make a PSTN call Waiting for your reply Thanks Gaurav Rai +919716238804

2 1

CNXCC PrePaid module
by Rene Montilva 27 Nov '14

27 Nov '14

Hi list I don't understand prepaid logic calculation, because when my credit is 0 or lees than cost per second, the call is established equal $var(i_pulse) and $var(f_pulse) how this works????

3 16

Re: [Kamailio-Users] /usr/local/sbin/kamdbctl create error
by vivi 01 Nov '14

01 Nov '14

Hi all.. I have solve the problem . Cheers, vivi From: vivi [mailto:vivi.hilton@gmail.com] Sent: Saturday, June 06, 2009 11:29 PM To: 'users(a)lists.kamailio.org' Subject: /usr/local/sbin/kamdbctl create error Hi all I have specify the wanted db type (DBENGINE=MYSQL) in the /usr/local/etc/kamailio/kamctlrc then I using "/usr/local/sbin/kamdbctl create" to create MySQL database, but I got this error: ERROR: database engine not specified, please setup one in the config script root@acer:/usr/local/src/kamailio-1.5.0/sip-server# vim /usr/local/etc/kamailio/kamctlrc root@acer:/usr/local/src/kamailio-1.5.0/sip-server# /usr/local/sbin/kamdbctl create MySQL password for root: INFO: test server charset ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Usage: grep [OPTION]... PATTERN [FILE]... Try `grep --help' for more information. /usr/local/lib/kamailio/kamctl/kamdbctl.mysql: line 112: [: =: unary operator expected INFO: creating database openser ... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) ERROR: Creating core database and grant privileges failed! Cheers, vivi

2 1

Hash Table capacity
by Ricardo Martinez 21 Oct '14

21 Oct '14

Hello list. I have a question about the HTABLE module. Suppose that I have a mysql database with 2 million of records. Is possible to load this table as a hash table compatible with Kamailio!? Hope someone can help me. Thanks, Ricardo Martinez.-

6 15

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2014