sr-users February 2015

sr-users@lists.kamailio.org

95 participants
130 discussions

by Uri Shacked

Hi, It is my second time upgrading kamailio to 4.2.X. Everything is working except the acc db_extra inserts. I keep on getting that error: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Incorrect integer value: '' for column XXXXXXX I must confess, I managed to solve the problem once. But I do not remember how :-(. The XXXXXX column is set as an integer with NULL enabled and no default value (which works on the kamailio server where i fixed it...) Any ideas of where it comes from? BR, Uri

9 years, 9 months

Kamailio Debug

by keita Adoulaye

Hi friends, Having problems with this command: tail -f /var/log/kamailio.log That it’s what i got: ERROR: ctl [ctl.c:382]: mod_destroy(): ERROR: ctl: could not delete unix socket /tmp/kamailio_ctl: Operation not permitted (1) Any ideas will appreciated Thanks

9 years, 9 months

ims_charging module - AVP's

by Shane Harrison

Hi IMS'ers I am generating CCR's happily from the ims_charging module (adapted to work standalone with standard userloc module) but have a couple of questions around AVP's supported. a) I note that in the 3GPP TS 32.299 V12.7.0 specification that table 7.1.0.1, that it indicates Vendor-Id and Vendor-Specific-Application-Id aren't used. But later in section 7.1.16 it indicates that the Vendor-Id should be 10415 and set inside the Vendor-Specific-Application-Id AVP. Should I assume that the table is wrong ? b) The ims_charging_module doesn't seem to put an Auth-Application-Id into the CCR. This is mandatory according to 3GPP and RFC4006. I note that it does appear under the Vendor-Specific-Application-Id - but this doesn't seem right to me? At this stage I am thinking to add the Auth-Application-Id AVP and also the 3GPP Called-Party-Address AVP. To I submit patches to the development list? Kind regards Shane Shane Harrison Senior Software Engineer Imagination Technologies NZ Limited Level 2 1 Market Grove Lower Hutt, 5010 New Zealand PO Box 30-449 Lower Hutt, 5040 New Zealand Phone: +64 4 890-3681 ext 3361

9 years, 9 months

Credit Control modules

by Shane Harrison

Hi all, As you will have seen from my posts, I have adapted the ims_charging module to work with usrloc module i.e. outside ims environment. I am interested in whether others see a use in having a Diameter Credit Control module that is standalone. There are already a number of Credit Control modules other than the ims one e.g. cncxx and I am not sure if the community sees a need for YACC. If there is interest then need to consider further how best to approach accommodating both ims dependence and standalone operation. Cheers Shane Shane Harrison Senior Software Engineer Imagination Technologies NZ Limited Level 2 1 Market Grove Lower Hutt, 5010 New Zealand PO Box 30-449 Lower Hutt, 5040 New Zealand Phone: +64 4 890-3681 ext 3361

9 years, 9 months

rtpproxy bridge "ie" "ei" behind NAT (like in aws EC2)

by Giovanni Maruzzelli

dear Kamailians, I have Kamailio+rtpproxy in front of FreeSWITCH. Kamailio and FreeSWITCH are on the same private network. Public Internet IP address ports are redirected to Kamailio and rtpproxy (same situation as in Amazon EC2). Clients comes from Internet, and make calls to Internet, SIP signaling passing through FreeSWITCH (eg: A leg incoming INVITE, FreeSWITCH originate an outbound B leg INVITE, and then bridge the legs). Using rtpproxy with -A "advertise" patch from Daniel, this topology works fine in a "traditional" telco way: rtp goes from caller to rtpproxy to callee, and viceversa. Now I want to maintain FreeSWITCH in the middle of rtp flow all the time, in a pure b2bua way, so it can control and analyze the media streams. So, I need rtpproxy to act paying attention to direction, as in caller->rtpproxy->freeswitch->rtpproxy->callee (and viceversa). Normally I would use Kamailio multihomed and rtpproxy in bridging mode. But I cannot have a NIC on the public address. How I can use the "ie" "ei" feature of rtpproxy in an Amazon-EC2 like environment? (eg: no public address attached to machine, but ports redirection from public address). I read this trick from Hugh Waite: "I have used rtpproxy (with the advertised address patch) in Amazon to bridge media between internet facing and private subnets in a VPC. I found that I couldn’t use different advertised addresses depending on which direction the signalling was going on a single private IP address. I worked around this by allocating a second private ip address to the instance and used that in the ‘bridge’. -A 54.86.X.X/10.0.1.15 –l 10.0.1.10/10.0.1.15" Can you explain how to use this trick, or another way (without additional addresses is gladly accepted!) to reach the same result (rtp always passing through FreeSWITCH) ? Thank you all in advance, -giovanni -- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618

9 years, 9 months

Session timers

by Eric Koome

How do I process session timers in Kamailio coming from particular upstream provider every 15mins during a call? At the moment the the call fails after 15 mins. Related to this, another provider sends re-invites during a dialog to check that my kamailio is alive. However Kamailio responds with "488 not here". How do I process these as well? Asterisk sits behind Kamailio. Thanks Eric

9 years, 9 months

CAMARILLO : (9898) ERROR: ctl [ctl.c:382]: mod_destroy(): ERROR: ctl: could not delete unix socket /tmp/kamailio_ctl: Operation not permitted (1)

by BY - Boujraf Youssef

Dear all, We get this error message : Using Kamailio V4.2 debian wheezy (9898) ERROR: ctl [ctl.c:382]: mod_destroy(): ERROR: ctl: could not delete unix socket /tmp/kamailio_ctl: Operation not permitted (1) We are not able to fix it. If anybody could help us it will be great. Best Regards, Youssef

9 years, 9 months

load balancing + rtpengine

by Virmantas Variakojis

Hi, I want to use load balancing (dispatcher or carrierroute) but i have two upstream interfaces (separate vlan's to provider sides) and third interface to SIP clients side. Also i need to rewrite sdp fields with correct information with rtpengine, but it's impossible as i don't know whitch direction (provider) will be chosen by algorithm. Is it possible to use load dispatcher or carrierroute in conjunction with rtpengine or load balancing must be done manualy? — Regards, Virmantas -- __________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in the present message (including any information contained in attachments herein) may be confidential and privileged. It may be read, copied and used only by the intended recipient. If you have received it in error please contact the sender (by return e-mail) immediately and delete this message. Any unauthorized use or dissemination of this message in whole or in parts is strictly prohibited. Print this message only if sharp necessary. УВЕДОМЛЕНИЕ О КОНФИДЕНЦИАЛЬНОСТИ: Информация, содержащаяся в настоящем сообщении (включая любое вложение) может быть конфиденциальной и охраняться действующим законодательством. Сообщение может быть прочитано, скопировано и использовано исключительно лицом, которому сообщение предназначается. Если Вы получили настоящее сообщение по ошибке, пожалуйста, незамедлительно сообщите об этом отправителю (ответным письмом по электронной почте). Любое несанкционированное использование или распространение информации, содержащейся в настоящем сообщении в целом или в части, строго запрещены. Не распечатывайте настоящее сообщение, если в этом нет крайней необходимости.

9 years, 9 months

TLS certificates per domain

by Muhammad Shahzad

Hi, I want to deploy a kamailio v4.2.x setup with multiple domains, all resolve to same IPv4 address kamailio is listening on. I am bit confused about how to configure TLS certificates using tls config file as mentioned here, http://kamailio.org/docs/modules/4.2.x/modules/tls.html#tls.p.config The documentation states that, -- If set the TLS module will load a special config file or config files from config directory, in which different TLS parameters can be specified on a per role (server or client) and domain basis (*for now only IPs*). The corresponding module parameters will be ignored. -- since all domains resolve single IP, so i assume i can specify only one section in tls config file with pair of key/pem file path. How can i specify more server certificates for same ip but with different domains? Thank you.

9 years, 9 months

Syntax issue?

by Igor Potjevlesch

Hello, I'm looking for a way to track a call by using basic AVP like this: Into a route that treats INVITE: $avp(s:state)="call_start"; Then, if I test this AVP into WITHINDLG route: if($avp(s:state)!="call_start") ; the test fails. Did I miss something? The goal is to update this AVP during the life of the transaction. Regards, Igor.

9 years, 9 months

← Newer
1
...
4
5
6
7
8
9
10
...
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2015