sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

Re: [Serusers] OT: xlite now with video and IM
by zhaomin 17 Jul '06

17 Jul '06

I download the xlite3.0 and testing with Asterisk server ,All the function is all right but video function cann't start to the caller ,Can anyones tell what's the back server needed? Is anyone know why? Regard ZhaoMin ----- Original Message ----- From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com> To: <serusers(a)iptel.org> Sent: Friday, July 14, 2006 4:16 PM Subject: Re: [Serusers] OT: xlite now with video and IM > Yes, X-lite ver.3 now even supports presence and looks nicer. However, > as far as i know, it has now only 2 concurrent lines, instead of 3. > > Andrey. > > On 7/14/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote: >> Hi! >> >> I just found out that xten offers a new xlite, based on eyebeam. AFAIK >> this is the first free available Windows SIP client with video and IM. >> As IMO eyebeam is the best client for testing and debugging purposes >> (because you can configure everything) I think this is interesting for >> you too. >> >> regards >> Klaus >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Users] vhow do i use SIP account to redirect
by ram 16 Jul '06

16 Jul '06

Hi all Till now i have seen examples of rewriting with IP address and port now i have another router from VoIP provider, where is give me sip username and password with IP address and port now i am planning to disconnect IP based authentication provider and go with SIP provider, becoz of Quality and price so how can i change the rewritehostport("provider IP:5060"); to my username/password:ip: port can some one suggest me what is the best method to do ram

3 3

[Serusers] problem with t_relay_to
by Luis Silva 16 Jul '06

16 Jul '06

Hi all!! I'm using the t_relay_to() function from the tm module but I'm having problems sending the message to the port that I want. I have in my cenario a proxy server(port:5062) that relays the message to another ser server that as the listening port 5063. Both ser servers are on the same machine, but has you can see, in different ports. I'm using t_relay_to("5063","10.10.12.4") for relaying the message, but instead of going to port 5063 the message goes to the port 5060 where I have another server. What might be the problem? Can you help? tks a lot Regards, Luis

3 2

[Serusers] how do i use SIP account to redirect
by ram 16 Jul '06

16 Jul '06

1 1

[Serusers] RTPPROY error messages
by Alberto Cruz 16 Jul '06

16 Jul '06

Hi everybody! Have somebody seen the following error messages at syslog? Jul 8 12:21:04 localhost /usr/sbin/ser[29329]: ERROR: unforce_rtp_proxy: support for RTP proxy is disabled Jul 8 12:21:04 localhost /usr/sbin/ser[29336]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Jul 8 12:21:04 localhost /usr/sbin/ser[29335]: Successethod - STOP ACCOUNTING Jul 8 12:21:04 localhost /usr/sbin/ser[29335]: ERROR: send_rtpp_command: can't connect to RTP proxy Jul 8 12:21:04 localhost /usr/sbin/ser[29335]: WARNING: rtpp_test: can't get version of the RTP proxy Jul 8 12:21:04 localhost /usr/sbin/ser[29335]: WARNING: rtpp_test: support for RTP proxy has been disabled temporarily Jul 8 12:21:04 localhost /usr/sbin/ser[29335]: ERROR: unforce_rtp_proxy: support for RTP proxy is disabled Jul 8 12:21:05 localhost /usr/sbin/ser[29341]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Jul 8 12:21:05 localhost /usr/sbin/ser[29329]: ERROR: force_rtp_proxy2: support for RTP proxy is disabled Are this normal? Regards Alberto Cruz

7 19

[Serusers] How to send PSTN CALLs to a NATED PSTN GW?
by Alberto Cruz 16 Jul '06

16 Jul '06

Hi guys maybe this have been asked before. I have the following: * I have an ADSL Internet access with a public dynamic IP. * I have a broadband router in order to share the Internet access using NAT. * I have a VoIP GW that supports register connected behind the NAT. When the GW registers itself SER knows its source IP and UDP port. Does anybody knows how to forward the PSTN calls to the GW when it is behind a NAT? Regards Alberto Cruz

2 7

[Users] REFER To: (how to handle in OpenSER)
by Frogger 16 Jul '06

16 Jul '06

I am trying to handle the REFER method for call-transfer and I need some assistance. What is the openser.cfg structure to handle a refer from ua1 to ua2 so that ua2 can call ua3? Basically, I am trying to establish a new INVITE with the REFER-To for ua2 calling ua3. Also, I need to clean up the initial transaction between ua1 and ua2. BTW, I read the rfc on REFER and I have a good sense of whats supposed to happen but I lack the mechanics to make it so. All the guidance will be very helpful. Thanks, F __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

4 10

[Serusers] voip behind nat
by selma＠uofk.edu 15 Jul '06

15 Jul '06

> hi > I'M running ser server on my firewall server ,I want my clients to work > behind nating ,I have n't stun on my user agents. > can you help me. > salma > sadan

1 0

Re: [Serusers] Is RTPproxy needed even when there is a Cisco PIX?
by Jiri Kuthan 14 Jul '06

14 Jul '06

That's actually a deep architectural observation with which I can only wholeheartly agree. -jiri At 21:40 13/07/2006, Richard Z wrote: >Hi, > >All SIP ALGs are broken one way or another. PIX is not an exception. >It is just impossible to keep up with all types of SIP messages and >headers and usages of the phones. It really depends on how you use the >phones. It might or might not be a problem for your particular use. My >experience is that rtp/mediaproxy is far more reliable than PIX. > >Cheers, >Richard > >On 7/12/06, Ricardo Carvalho <rcarvalho(a)iric.up.pt> wrote: >>Hi, >> >> >>I'm deploying a VoIP server using SER and I would like to know if I need >>to install RTPproxy (or Mediaproxy), because the network where the >>server will be placed already has a Cisco PIX 515E which has this >>feature that analyses headers of SIP messages and I suppose that >>rewrites them to avoid NAT problems. >> >>Regards, >> >>Ricardo. >> >> >> >>_______________________________________________ >>Serusers mailing list >>Serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

2 1

[Users] 1.1.0-tls install problem
by Frank Garcia 14 Jul '06

14 Jul '06

Now that it compiles, I'm getting this error when installing (on OpenBSD 3.9-current i386): Frank /usr/local/src/openser-1.1.0-tls$ sudo gmake install gmake[1]: Entering directory `/usr/local/src/openser-1.1.0-tls/ modules/acc' gmake[1]: `acc.so' is up to date. gmake[1]: Leaving directory `/usr/local/src/openser-1.1.0-tls/modules/ acc' <snip> #install -m 644 etc/openser.cfg /usr/local/etc/openser/ if [ -z "" ]; then \ echo "No TLS scripts installed" ; \ else \ mkdir -p /usr/local/etc/openser//tls ; \ mkdir -p /usr/local/etc/openser//tls/rootCA ; \ mkdir -p /usr/local/etc/openser//tls/rootCA/certs ; \ mkdir -p /usr/local/etc/openser//tls/rootCA/private ; \ mkdir -p /usr/local/etc/openser//tls/user ; \ touch etc/tls/README /usr/local/etc/ openser//tls/; \ install -m 644 etc/tls/README /usr/local/etc/ openser//tls/; \ touch etc/tls/rootCA/index.txt /usr/local/ etc/openser//tls/rootCA/; \ install -m 644 etc/tls/rootCA/index.txt /usr/local/ etc/openser//tls/rootCA/; \ touch etc/tls/rootCA/serial /usr/local/etc/ openser//tls/rootCA/; \ install -m 644 etc/tls/rootCA/serial /usr/local/etc/ openser//tls/rootCA/; \ touch etc/tls/rootCA/cacert.pem /usr/local/ etc/openser//tls/rootCA/; \ install -m 644 etc/tls/rootCA/cacert.pem /usr/local/ etc/openser//tls/rootCA/; \ touch etc/tls/rootCA/certs/01.pem /usr/ local/etc/openser//tls/rootCA/certs/; \ install -m 644 etc/tls/rootCA/certs/01.pem /usr/ local/etc/openser//tls/rootCA/certs/; \ touch etc/tls/rootCA/private/cakey.pem / usr/local/etc/openser//tls/rootCA/private/; \ install -m 644 etc/tls/rootCA/private/cakey.pem / usr/local/etc/openser//tls/rootCA/private/; \ touch etc/tls/user/user-calist.pem /usr/ local/etc/openser//tls/user/; \ install -m 644 etc/tls/user/user-calist.pem /usr/ local/etc/openser//tls/user/; \ touch etc/tls/user/user-cert.pem /usr/ local/etc/openser//tls/user/; \ install etc/tls/user/user-cert.pem /usr/local/etc/ openser//tls/user/; \ touch etc/tls/user/user-privkey.pem /usr/ local/etc/openser//tls/user/; \ install -m 644 etc/tls/user/user-privkey.pem /usr/ local/etc/openser//tls/user/; \ touch etc/tls/user/user-cert_req.pem /usr/ local/etc/openser//tls/user/; \ install -m 644 etc/tls/user/user-cert_req.pem /usr/ local/etc/openser//tls/user/; \ fi No TLS scripts installed touch /usr/local/sbin//openser install -m 755 openser /usr/local/sbin/ sed -e "s#/usr/local/sbin#/usr/local/sbin/#g" \ < scripts/openserctl > /tmp/openserctl sed -i -e "s#/usr/local/lib/openser#/usr/local/lib/openser#g" /tmp/ openserctl sed: unknown option -- i usage: sed script [-an] [file ...] sed [-an] [-e script] ... [-f script_file] ... [file ...] gmake: *** [install-bin] Error 1

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users