sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

[Users] Setting up voicemail
by Edgar Barbosa 15 Jun '06

15 Jun '06

Hi all, I'm trying to setup an openser using an asterisk as a pstn gw and voicemail server. Everything seems to be working fine except when a call is redirected to voicemail by timeout (using failure_route). In this situation, asterisk is asking for proxy auth to openser that redirects the request to the calling ua. But when the ua responds to openser, this latest sends the invitation to the destination ua and not to asterisk, as he should. I can't figure out a way of accomplishing this... any idea? The sip trace diagram and the full openser.cfg are in attachment. The wrong invite is represented as "F19 INVITE" in the diagram... Thanks, Edgar

2 1

[Users] setdsturi
by Simon Morvan 15 Jun '06

15 Jun '06

Hello there, Why does the following configuration statement : setdsturi("sip:hostname:5061"); is not accepted and results in the following in my logs : set_dst_uri: Invalid parameter value It's probably straightforward but I don't understand... Thanks in advance. -- Simon Morvan.

2 1

[Users] renaming locations table
by Fatih Cerit 15 Jun '06

15 Jun '06

Hi all I want to rename locations table for entegrating to my database structure. is there any way??

2 3

[Serusers] SIP registration with openser
by Shenen Shenen 15 Jun '06

15 Jun '06

I've set the SIP_DOMAIN environment variable, (the IP of the pc where I'm running the openser and then the same command but with the IP where I've a sopftphone on a XP pc) and then I've run this: openserctl add 650 1234 650(a)192.16.25.12 (650 is a softphone registered on 192.16.25.10...a XP pc)(I've made also with 650@192.16.25.10..but doesn't change...) Mysql password: (empty I think) MySql password for user 'openser@localhost': (empty) Enter password: (root password ) ERROR 1045 (28000): Access denied for user 'openser'@'localhost' (using password: YES) introducing the new user to the database failed Where is the problem? Which are the right passwords?....I'm using openser on an asterisk at home box..

2 1

[Serusers] About Change in Listening port of SER
by sumit dengri 15 Jun '06

15 Jun '06

sir Can we change default listening port (5060) of SER to any other port by changing the port number in ser.cfg file. Or by any other means? regards Send instant messages to your online friends http://in.messenger.yahoo.com Stay connected with your friends even when away from PC. Link: http://in.mobile.yahoo.com/new/messenger/

2 1

[Serusers] Database in openser and SIP registration
by Shenen Shenen 15 Jun '06

15 Jun '06

Hi!I've run the command to create the database in this way; openser_mysql.sh create I've entered a blank password for root, I entered ser as the domain: I got a creating database ... message, then got another "Enter password:" request, entered blank and then returned to the command line Domain (realm) for the default user 'admin' : ser I've put; If I run in mysql with mysql -p and entered in it,I run connect,I've this; mysql> connect Connection id: 115 Current database: *** NONE *** If I use mysql>connect ser ERROR 1049 (42000): Unknown database 'ser' Where is the problem? I use the following command to register my openser; openserctl add 650 1234 650(a)192.168.251.12 [mailto:650@192.168.251.12<650(a)192.168.251.12> ] /usr/local/sbin/openserctl 1.1 - $Revision: 1.6.2.2 $ parameter usage: * subscribers * add <username> <password> <email> .. add a new subscriber (*) passwd <username> <passwd> ......... change user's password (*) rm <username> ...................... delete a user (*) mail <username> .................... send an email to a user alias show [<alias>] ............... show aliases alias rm <alias> ................... remove an alias alias add <alias> <uri> ............ add an aliases rpid add <username> <rpid> ......... add rpid for a user (*) rpid rm <username> ................. set rpid to NULL for a user (*) rpid show <username> ............... show rpid of a user alias_db show <alias> .............. show alias details ............. etc etc.... Where is the problem?

2 1

[Serusers] DB Connectivity Error in SerWeb
by sumit dengri 15 Jun '06

15 Jun '06

sir When I try to login in serweb it showed the following error message: DB Error: Connect Failed Bad User Name/Password PLZ tell me the possible reasons for this error message. regards. Send instant messages to your online friends http://in.messenger.yahoo.com Stay connected with your friends even when away from PC. Link: http://in.mobile.yahoo.com/new/messenger/

2 1

[Serusers] sip to h323 gateway ...
by Cesc 15 Jun '06

15 Jun '06

Hi, I know, a bit off topic ... but i am sure people here have the expertise, so :) I am facing a request to bridge a sip network and an h323 network. I would like to operate the sip with ser as the proxy and some gatekeeper on the h323 side (not required though). The question is ... what should i use to bridge the two networks? - asterisk - yate - vovida -> vocal Any others? comments? Ideally, the bridge would be only signalling-wise (rtp to be direct end-to-end). But, if someone had bad experience with this and would recommend to use a B2BUA approach, please, tell me. I don't know if it makes a difference, but most of the calls would go from the H323 side to the SIP side ... but i don't really want to restrict SIP->H323. Cesc

2 1

[Serusers] ser.cfg for VRRP protocol => using t_replicate for 2 proxies
by Shenen Shenen 15 Jun '06

15 Jun '06

Hi!I've 2 asterisk at home and I use openser becouse I want use more proxies for my softphones;my problem is this: I'm using vrrp protocol; 192.168.25.1 is the master (asterisk1) 192.168.25.2 is the slave (asterisk2) 192.168.25.200 is the virtual IP. then I have my softphones on a Xp pc with IP 192.168.25.10 I set my softphones with 192.168.25.200 and they run, only that, the problem with asterisk is that softphones and IP phones(some like wi-fi) can register only one proxy, and asterisk can't make a option for more proxies than one;so the proxy is the 192.168.25.200, but at real it is 192.168.25.1..andsoftphones or wi-fi are registered only in the first asterisk with the 192.168.25.1..if the master falls down the slave hasn't the authentication SIP registration...only the master..So I must use openser or ser to have 2 = box my problem is resolved only if I use the redirect option to have 2 = asterisk box so the database can be opened and read from one asterisk to the other;if the master falls down the slave has all the configuration and the SIP registration, so it can work without problems. A) I've set this file on asterisk 192.168.25.1 the master # # $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $ # # demo script showing how to set-up usrloc replication # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) # ------------------ module loading ---------------------------------- loadmodule "modules/mysql/mysql.so" loadmodule "modules/sl/sl.so" loadmodule "modules/tm/tm.so" loadmodule "modules/maxfwd/maxfwd.so" loadmodule "modules/usrloc/usrloc.so" loadmodule "modules/registrar/registrar.so" loadmodule "modules/auth/auth.so" loadmodule "modules/auth_db/auth_db.so" # ----------------- setting module-specific parameters --------------- # digest generation secret; use the same in backup server; # also, make sure that the backup server has sync'ed time modparam("auth", "secret", "alsdkhglaksdhfkloiwr") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); return; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # verify credentials if (!www_authorize("", "subscriber")) { www_challenge("", "0"); return; }; # if ok, update contacts and ... save("location"); # ... if this REGISTER is not a replica from our # peer server, replicate to the peer server if (!src_ip== 192.168.25.2) { t_replicate("192.168.25.2", "5060"); }; return; }; # do whatever else appropriate for your domain log("non-REGISTER\n"); }; } B) I've set this file on asterisk 192.168.25.2 the slave # # $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $ # # demo script showing how to set-up usrloc replication # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) # ------------------ module loading ---------------------------------- loadmodule "modules/mysql/mysql.so" loadmodule "modules/sl/sl.so" loadmodule "modules/tm/tm.so" loadmodule "modules/maxfwd/maxfwd.so" loadmodule "modules/usrloc/usrloc.so" loadmodule "modules/registrar/registrar.so" loadmodule "modules/auth/auth.so" loadmodule "modules/auth_db/auth_db.so" # ----------------- setting module-specific parameters --------------- # digest generation secret; use the same in backup server; # also, make sure that the backup server has sync'ed time modparam("auth", "secret", "alsdkhglaksdhfkloiwr") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); return; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # verify credentials if (!www_authorize("", "subscriber")) { www_challenge("", "0"); return; }; # if ok, update contacts and ... save("location"); # ... if this REGISTER is not a replica from our # peer server, replicate to the peer server if (!src_ip== 192.168.25.1) { t_replicate("192.168.25.1", "5060"); }; return; }; # do whatever else appropriate for your domain log("non-REGISTER\n"); }; } Must I call this file ser.cfg?Right?Must I set the on the master listen=192.168.25.1 #on the master port=5060 on the slave listen=192.168.25.2 #on the slave port=5060 Then I use on all the 2 linux; #chkconfig -add ser #chkconfig -add mediaproxy And ser and mediaproxy works like deamon every time I start-up the 2 linux. Is it right to add this 2 sip number in openser or ser in this way?(they're registered in asterisk and 650 is a number from a X-lite, 651 from Phoner) serctl add 650 1234 650(a)192.168.25.200 [mailto: 650(a)192.168.25.200] serctl add 651 1234 651(a)192.168.25.200 [mailto: 651(a)192.168.25.200] Is it right this configuration?If the master falls down the slave has all the Sip registration authentificated and run without any problem? 100000 thanks!

2 1

[Serusers] serctl errors;adding new users
by Shenen Shenen 15 Jun '06

15 Jun '06

Hi!I've a lot of softphones to one pc with IP 192.1.168.10 (XP pc) and ser in a asterik_at_home box with IP 192.1.168.12, if I make : serctl add 650(a)192.1.168.10 1234 mymail(a)mymail.com Mysql password: Password?is helso or pass0rd ...no one of this,it returns me always this error ERROR 1045 (28000): Access denied for user 'serro'@'localhost' (using password: YES) ERROR 1045 (28000): Access denied for user 'serro'@'localhost' (using password: YES) ERROR 1045 (28000): Access denied for user 'ser'@'localhost' (using password: YES) introducing the new user to the database failed which is the password? With serctl ps I'vent the IP of the XP... I must add it in ser.cfg?And like?If I have other softphones or IP phones on other machine,must I set in ser.cfg the IP of every on pc or IP phone? And how?

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users