sr-users

sr-users@lists.kamailio.org

10 participants
37460 discussions

Start a nNew thread

[Users] openser forking
by Padmaja RV 14 Jun '06

14 Jun '06

Hi all, i need to implement openser for forking an incoming sip call. can anyone pls guide me how to do this?

2 2

Re: [Users] openser forking
by Padmaja RV 14 Jun '06

14 Jun '06

Hi, sorry, i could not understand what u meant by that.... please elaborate a bit, Thanks, Padmaja ----- Original Message ----- From: ram To: Padmaja RV Sent: Wednesday, June 14, 2006 4:30 PM Subject: Re: [Users] openser forking Ngrep should help you for the same ram On 6/14/06, Padmaja RV <padmaja.rv(a)vodcalabs.com> wrote: Hi all, i need to implement openser for forking an incoming sip call. can anyone pls guide me how to do this? _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

1 0

[Users] Openser as front end to Asterisk
by Kenny Chua 14 Jun '06

14 Jun '06

Hello everyone, I've finally got openser working with mysql. Now I'm trying to integrate Openser with Asterisk. I read Asterisk at large. However I have a few questions: 1) It is said that openser as a front end to asterisk will enable more concurrent calls comparing to asterisk alone. How is that so? 2) If openser acts as a front end connecting all SIP calls, what is the role of asterisks? 3) Will the load of SIP calls be handled by openser alone? Or is it both asterisk and openser? I'm confuse with this, please help a newbie out here. Thank you in advance. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[Serusers] rewriting the outgoing URI to its alias
by Andy Thomas 14 Jun '06

14 Jun '06

Greger, Im already doing this for calls coming into my SER installation. However I want to do it the other way around, i.e. from SER/UA to PSTN Therefore I want to rewrite the username if the outgoing INVITE message to be the alias, not the location, when sending to the PSTN. Andy _____ From: Greger V. Teigre [mailto:greger@teigre.com] Sent: 12 June 2006 09:33 To: Andy Thomas Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] rewriting the outgoing URI to its alias I see a lot of confusion on the different user related ids in SIP. Let me try to explain (and answer your question, Andy, at the end of the post...) Let's start at the user agent(UA) side: -------------------- AOR: Address of record is the sip:myuser@domain.com address that you are known as, just like your email address. Many user agents don't ask for AOR, but builds it from other parameters you need to set Username: The username is normally the user (before @) of AOR) Realm: Often the domain portion of the AOR, thus AOR = sip:username@realm Friendly name/displayname: "My name" Out of this info, the From header is constructed: From: "My name" <sip:username@realm> --- Entirely separate (but sometimes confused in user agents): Authentication username: The user used for authentication Authentication realm: The realm to authenticate within Very often the authentication realm is implicitly assumed to be the same as the AOR realm --- Then, the user agent will create the Contact header. The Contact header should be the public contact address of your current location. Thus: Contact: sip:username@mypublicip:5060 If the user agent is behind a NAT, the mypublicip will be a private address. --- A sidenote: Unless registration server is explicitly specified, the realm in the AOR will be used for looking up the SIP registration server using DNS SRV or A lookups. You should avoid putting the FQDN of your SIP server in the realm. Also, you may in some user agents specify outbound proxy. This is the proxy where the user agent will send INVITEs (and other outbound messages). ------------------- And on the SER side: ------------------- Authentication user/realm are used to do Digest authentication, but are then forgotten (i.e. not stored). The AOR is registered in the location table, together with the Contact header, as well as the source ip and port (if different from Contact). The fix_nated_register() function handles this setting of the so-called received parameter. So, to the routing: - Messages that need to be routed (i.e. do not have Route headers) will have a Request URI; the first line and the part after the message type: INVITE sip:username@domain.com - It is by changing this request URI, you do routing. The t_relay() command uses the URI to forward the message correctly - Before forwarding to a user agent, you want the request uri to be the same as the stored Contact header for the AOR you are looking up. If not, the user agent may reply with a 404 User not found - The From header is NOT used for routing, and for backwards RFC compatibility, you should not change the From header as some UAs will use the content of the From header to match a dialog (however, if your UAs from experience still work, there should not be a problem doing it, it's just not RFC-compliant and may pop up and kick your butt later ;-) - The AOR in location table is used for looking up incoming messages if you can find a direct match between the Request-URI in the incoming message and the stored AOR. If not, you can use the aliases table (and lookup("aliases")) to match the Request-URI with something in the aliases table, that again will map to the AOR in the location table --- So keeping this (fairly simple) concept in focus: Routing (regardless of LCR, avps or whatever) should focus on finding the correct Request-URI before you call t_relay(). BUT, there are ways of "messing" up this... --- - There are several commands in SER you can use to override the Request-URI (forward_*). They should be avoided, unless you have a valid reason for having a Request-URI in the message you are forwarding that is NOT resolvable (either IP address or DNS name or DNS SRV/A resolvable) to the party you are forwarding to. The reason can be if you want the R-URI to contain the AOR and then forward the message to a server handling voicemail - The dst_uri parameter (implicitly set by lookup) will tell t_relay() to send the message to dst_uri instead of the Request-URI. lookup() will set this when it finds that the Contact stored for the AOR also has an associated received ip:port (because the user agent was NATed) In general trying all sorts of tricks o fix-up things the way you need it may not be so smart. Stick to the basics and question yourself: Is this something I really want to do? ---------------------- To Andy, you want the aliases table to map to the AOR (as registered by the UA in the REGISTER command). You do lookup("aliases") to resolve your DID into an AOR. Then, later you can do lookup("location") to map the AOR to the location of the UA (i.e. Contact/dst_uri). Then your Request-URI will be correct. g-) Andy Thomas wrote: Does anyone know how I would do this- For all users who have PSTN access, they are assigned a number in the MySQL alias table which matches a PSTN DDI number. e.g. user 8000 has an alias of 2071231234, so on an incoming call the lookup("aliases") function correctly matches the DDI to the user. I want my ser.cfg to rewrite the user on an outgoing call, if a number exists in the alias table for that user Obviously, the rewriteuser function will be used, but what do I put in after that? I have tried rewriteuser (lookup ("aliases")) but that doesn't work Can anyone help? _____ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 3

[Users] OpenSER as a remote side Outbound Proxy?
by Enky 14 Jun '06

14 Jun '06

Is it possible to configure the OpenSER with nathelper/mediaproxy to act as a remote-side outbound proxy? I have tried to make it, but unfortunately still can not do that. It will be best if someone shares a working openser.cfg file. The best I got is that when the UA makes call it works OK, but the UA can not be dialed from other UA in the network. Maybe it is not even registered.

1 0

[Serusers] Serctl commands don't work
by Alois Schafferhofer 14 Jun '06

14 Jun '06

Hi, I have installed the Presence Version of SER on a SUSE Linux Server. If I want to add a user with the command "serctl add ...", I get following message: "error: 500 Command 'ul_show_contact' not found" The same with serctl moni: 500 Command 'version' not found 500 Command 'uptime' not found ... I hope, someone can help me. Thanks, Alois

1 0

[Users] redirect
by Andrew And 14 Jun '06

14 Jun '06

Does someone has some example with redirect in OpenSER? And could send it?

2 1

[Users] Realtime MYSQL
by Shane Burrell 14 Jun '06

14 Jun '06

Is the mysql auth supposed to be realtime? I seem to have to restart openser when I make a change to the alias or subscriber in openser. Thanks, shane ***************************************************************

2 1

[Serusers] Content-Type: multipart/mixed; boundary=uniqueBoundary problems?
by Greg Fausak 14 Jun '06

14 Jun '06

Before I start debugging I thought I'd ask. I have a sip message from a gateway (Cisco IOS) that is being sliently dropped. Should ser be able to handle a message that looks like this? I haven't done a multipart message before. Thanks, ---greg INVITE sip:+19194724170@sn-sip-in.ca-sn1.cisco.com:5060 SIP/2.0 Via: SIP/2.0/UDP 172.18.109.91:5060;branch=z9hG4bK4F0109C Remote-Party-ID: <sip: +19199915651(a)172.18.109.91>;party=calling;screen=yes;privacy=off From: <sip:+19199915651@172.18.109.91>;tag=249E4980-FFC To: <sip:+19194724170@sn-sip-in.ca-sn1.cisco.com> Date: Tue, 13 Jun 2006 19:37:55 GMT Call-ID: F241878C-FA4A11DA-81EFC5C8-2F1D7951(a)172.18.109.91 Supported: 100rel,timer,resource-priority,replaces Min-SE: 1800 Cisco-Guid: 4064260884-4199158234-2157445126-1397050494 User-Agent: Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER CSeq: 101 INVITE Max-Forwards: 10 Timestamp: 1150227475 Contact: <sip:+19199915651@172.18.109.91:5060> Expires: 180 Allow-Events: telephone-event Content-Type: multipart/mixed;boundary=uniqueBoundary Mime-Version: 1.0 Content-Length: 797 --uniqueBoundary Content-Type: application/sdp Content-Disposition: session;handling=required v=0 o=CiscoSystemsSIP-GW-UserAgent 8340 2382 IN IP4 172.18.109.91 s=SIP Call c=IN IP4 172.18.109.91 t=0 0 m=audio 19122 RTP/AVP 18 3 0 4 100 101 c=IN IP4 172.18.109.91 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=yes a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:4 G723/8000 a=fmtp:4 annexa=yes a=rtpmap:100 X-NSE/8000 a=fmtp:100 192-194 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 --uniqueBoundary Content-Type: application/gtd Content-Disposition: signal;handling=optional IAM, PRN,isdn*,,NI***, USI,rate,c,s,c,1 USI,lay1,ulaw TMR,00 CPN,02,,1,4724170 CGN,04,,1,y,2,9199915651 CPC,09 FCI,,,,,,,y, GCI,f23fb314fa4a11da8098000653454c7e --uniqueBoundary-- -- Greg Fausak greg(a)thursday.com

2 1

[Serusers] Presence's libs
by Rosalvina Romero 14 Jun '06

14 Jun '06

Hello, I have Ser 0.9.6, and I'm trying to install the Presence model to it. I have recompiled SER but it doesn't generate all the libraries that are needed. In particular I can't find libxcap, libcds nor libpresence. Could you tell me where I could find them, I have been looking for them in several websites but I couldn't find them. Thanks in advance Ragards, Rose __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users