sr-users

sr-users@lists.kamailio.org

10 participants
37460 discussions

[Users] Jabber & PA modules
by Rodney G. McDuff 13 Jun '06

13 Jun '06

Hi All What is the current state of play with the openser jabber and pa modules? -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

2 1

[Users] called failed 408 Request timeout
by raviprakash sunkara 13 Jun '06

13 Jun '06

hi users, I need to say just "hello to all" I'm working on openser + radius.. Actually in LAN network its working fine... When I deploy the openser + radius in My main server which is in some other place . its successfully login and When I trying to make call its show the log messages as " Called Failed :- 408 Request TimeOut.... " ========================================================================= modparam('registrar","nat_flag',6) modparam("nathelper","natping_interval",30) modparam("nathelper","ping_nated_only",1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") #################33 modparam("rr", "enable_full_lr", 1) ############################################### route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("13")) { sl_send_reply("483","Too Many Hops........................!"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if(!method== "REGISTER") { record_route(); }; # loose-route processing if (loose_route()) { # add now 0n 9 setflag(1); acc_rad_request("200 ok "); t_relay(); exit; }; # account completed transactions via syslog if(uri==myself) { if(method=="REGISTER") { if(!radius_www_authorize("192.168.2.55")) { www_challenge("192.168.2.55","0"); exit; }; #consume_credentials(); save("location"); if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; if(method=="INVITE"|| method=="ACK") { record_route(); acc_rad_request("200"); if(isflagset(6)) { force_rtp_proxy("e"); }; #setflag(1); t_on_reply("1"); }; /* if (method=="BYE") { record_route(); }; */ if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; fix_nat_contact(); if (method=="BYE" || method=="CANCEL") { #log (1, "BYE or CANCEL\n"); #setflag(1); acc_rad_request("200"); #acc_rad_request("Stop"); unforce_rtp_proxy("e"); #setflag(1); }; if(!lookup("location")) { sl_send_reply("404","Woo......... NOt found"); }; }; if(!t_relay()) { sl_reply_error(); }; lookup("aliases"); #setflag(2); exit; } onreply_route[1] { if( isflagset96) && status=~"[0-9][0-9][0-9]") { fix_nat_contact(); force_rtp_proxy("e"); }; } ========================================================================= -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

2 1

[Users] Usrloc failure on startup
by Johannes Lehninger 13 Jun '06

13 Jun '06

Hi, I use openser 1.0.1 and I get the following error on starting it up 0(0) AUTH module - initializing 0(0) AUTH_DB module - initializing vm10:~ # 0(0) usrloc:preload_udomain: Wrong version v136427728 for table <location>, expected v1001 0(0) register_udomain(): Error while preloading domain 'location' 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration My config file is the default one except of the additional modules: mysql,mediaproxy, domain. loadmodule "/usr/local/openser10/lib/openser/modules/mysql.so" loadmodule "/usr/local/openser10/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/openser10/lib/openser/modules/domain.so" loadmodule "/usr/local/openser10/lib/openser/modules/xlog.so" .. # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/openser10/lib/openser/modules/auth.so" loadmodule "/usr/local/openser10/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("auth_db|usrloc|domain", "db_url", "mysql://openser:openserrw@localhost/openser10") modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) Regards Hannes

3 2

[Users] kphone and xlite with TLS
by D'Addelfio Davide 13 Jun '06

13 Jun '06

Hi to all, does anyone know if user agent Kphone and X-lite supports TLS in Openser? Thanks in advance for reply. Davide

2 1

[Users] Authentication using auth_diameter
by Dave Waiting 13 Jun '06

13 Jun '06

I am able to authenticate users using Radius without problem, but I am struggling to do the same using Diameter. I have installed the Diameter Server Client (DISC) that is mentioned in the auth_diameter readme, and have it listening on port 3000. When I start openSER there are no errors (i.e. the auth_diameter module loads), but the DISC client complains that the peer is unknown. Both SER and the DISC client are running on the same machine, so I added aaa://localhost as a peer, but that does not seem to help. Looking at a tcpdump output it shows that SER is trying to contact the DISC client from a range of ports but is never successful. Are there any further installation manuals, sample configurations or tutorials on this topic? Regards Dave

2 1

Re: [Users] DID Origination
by Bogdan-Andrei Iancu 13 Jun '06

13 Jun '06

Hi Kevin, the proper mailing list for this kind of topics is business(a)openser.org. regards, bogdan Kelvin Williams wrote: > This post is definitely going to be off-topic and I ask for your > forgiveness in advance. > > However, we are a cable ISP and are looking to provide voice services > to our cable modem subscribers. We’ve been in talks with several > companies which provide DID Origination and Termination but want to > make sure we’ve covered them all before making a decision on which to > pick, or would like to get suggestions from anyone in our same (or > like) position of companies to look at or stay away from. > > You can reply to me directly to prevent the list from being populated > with off-topic subjects. > > Thanks, > > Kw > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

Re: [Users] how to get sdp data
by Bogdan-Andrei Iancu 13 Jun '06

13 Jun '06

Hi Stefan, you may use pseudo-variables to access the body and regexp to get the fields you need into AVPs. Then you have the option to either write them via avp_db_store(), either to log them into accounting via the extra accounting feature. regards, bogdan Franz Edler wrote: >>I need to get the sdp data transmitted in SIP-Three-Way handshake. >>Especially the IP-Adresses and Portnumbers of the RTP stream but didn't >>find a solution for this yet. >> >> > >Look at functions offered by >http://openser.org/docs/modules/1.1.x/textops.html > > > >>Additionaly Information about what i'm doing in my master thesis: >>Take SDP Data mentioned above and send it from a PC running OpenSER to >>another PC working as IP-Router. On the IP-Router a traffic control >>filter will be added so that this router marks the DS-Field and >>priorizes the RTP-stream. >> >>So the PC with OpenSER works as a SIP-Proxy and as Policy-Server that >>configures the routers in a network. >> >>COPS Protocol is used for Communication between SIP-Proxy and IP- >>Router. >> >> > >Interesting. Keep us informed when finalized. > >Regards >Franz > > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > >

1 0

[Users] RTPProxy problem
by Edgar Barbosa 13 Jun '06

13 Jun '06

Hi all, I'm having some problems with rtpproxy and openser... Although having rtpproxy running on the same machine, and using /var/run/rtpproxy.sock, openser seems not to be able to connect to it: 10(7357) ERROR: send_rtpp_command: can't connect to RTP proxy 10(7357) send_rtpp_command(): proxy <unix:/var/run/rtpproxy.sock> does not responding, disable it 10(7357) WARNING: rtpp_test: can't get version of the RTP proxy 10(7357) WARNING: rtpp_test: support for RTP proxy <unix:/var/run/rtpproxy.sock>has been disabled temporarily I'm using recent versions: openser-devel-cvs-20060608-141301.tgz rtpproxy-cvs-20060420-194006.tgz Any idea of what can be wrong? Thanks, Edgar

2 1

[Users] Allow only perticular country
by ram 13 Jun '06

13 Jun '06

Hi all Just working around with openser just looking config, and had one requirement I have users 3 i want 1 and 2 can access calls where ever they can but 3 need to call only USA, and he should not get access to rest of the place can some one give me idea, how can i achive this or any sample config ram

3 3

Re: [Serusers] DB Unknown error
by Zenone 13 Jun '06

13 Jun '06

Thank you Karel, now it works! But after subscribing i don't receive any mail to confirm my registration. I saw apache logs and serweb logs, and they are normal...no error. Thank you for your help! Michel --------- Message d'origine -------- De: Karel Kozlik <karel(a)iptel.org> A: Zenone <zenone(a)telip.com> Copies: serusers(a)lists.iptel.org Objet: Re: [Serusers] DB Unknown error Date: 13/06/06 11:43 > Hi, > look at these config options (config_data_layer.php) > Karel > > > /** > * Needs to be set when you are useing MySQL >= 4.1 > * see mysql manual for more info > * > * $config->data_sql->collation = "utf8_general_ci"; > */ > > $config->data_sql->collation = ""; > > /** > * Set to true when you are useing MySQL >= 4.1 > * This option set mysql system variables character_set_client, > * character_set_connection, and character_set_results to charset > * used in serweb > * > * $config->data_sql->set_charset = true; > */ > > $config->data_sql->set_charset = false; > > > > Zenone napsal(a): > > Hi, > > I still have troubles with my serveb... (thanks karel for answering my > > previous question) I saw the serweb log and it can be read : > > > > "" 'Jun 13 10:13:52 serweb [error] file: > > /usr/local/serweb-0.9.4/data_layer/method.get_aliases.php:27: DB Error: > > unknown error - select username, domain from aliases where > > lower(contact)=lower('sip:zenone@192.168.0.120') order by username > > [nativecode=1267 ** Illegal mix of collations (latin1_swedish_ci,IMPLICIT) > > and (utf8_general_ci,COERCIBLE) for operation '='] "" > > I followed karel advice of july 2005 and it doesn't work anyway. > > I work on a fedora with ser 0.9.6 and serweb 0.9.4. > > Thanks for your help! > > Michel > > > > ________________________________________________ > > Message sent using UebiMiau 2.7.8 > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > ________________________________________________ Message sent using UebiMiau 2.7.8

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users