sr-users

sr-users@lists.kamailio.org

10 participants
37460 discussions

Start a nNew thread

[Serusers] Redirect
by Anderson Alves Albuquerque 14 Jun '06

14 Jun '06

Does someone has some example with redirect in SER and could send it? -- [], Anderson

2 3

RE: [Serusers] Sip soft phones for XP with tcp support
by Benjamin.George＠t-systems.com 14 Jun '06

14 Jun '06

Hi, There are a lot of softphones available for free/trial with audio/conf support. But softphones with video, IM, WB, AS, etc support are all paid ones. You can try SJPhone from SJ Labs (www.sjlabs.com <http://www.sjlabs.com/> ). It has got support for TCP too. Regards, Benjamin. _____ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of sandeep kamath Sent: Wednesday, June 14, 2006 2:52 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Sip soft phones for XP with tcp support Hi , Are there any good softphones that have support for tcp other than the one by counterpath/xten . regards, sandeep,

1 0

[Serusers] Append prefix after load_gw()?
by Ryan Pagquil 14 Jun '06

14 Jun '06

Hi, Is it possible to append prefix after load_gw() in lcr? I need to prefix the RURI so that I comply with our provider requirements. Is this possible? I'm using "prefix" before "rewritehost" and this is working but how about "load_gw" first then "prefix" based on the gateway obtained from LCR? Thanks in advance, Ryan

3 7

[Users] OpenSER performance
by Helge Waastad 13 Jun '06

13 Jun '06

Hi, just want to tell you that if you want so see what performance you'll get out of your OpenSER proxy, I found out by using a software called super-smack I easily can generate a typical OpenSER sql query and see how many qps I can get. ...nice to have :-) br hw -- Helge Waastad Senior Konsulent Smartnet

4 3

[Serusers] Sip soft phones for XP with tcp support
by sandeep kamath 13 Jun '06

13 Jun '06

Hi , Are there any good softphones that have support for tcp other than the one by counterpath/xten . regards, sandeep,

1 0

[Serusers] Problems with starting SER
by Alois Schafferhofer 13 Jun '06

13 Jun '06

Hi, I have following problem with SER. I have downloaded the Presence Snapshot version ser-0.10.99-dev-pa-4.1, but I can't start it. My config file looks like that: debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #memlog=5 # memory debug log level #log_facility=LOG_LOCAL0 # sets the facility used for logging (see syslog(3)) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=2 alias="fh-joanneum.at" #user=ser #group=ser #open_fd_limit=1024 # sets the open file descriptors limit #mhomed=yes # usefull for multihomed hosts, small performance penalty #fifo="/tmp/ser_fifo" sip_warning=yes If I want start SER, it generates a PID, but with the command ps -aux, I can't find this process. With the command serctl ps, I get the message: Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config. OEFEG:~ # serctl start Starting SER : started pid(7431) OEFEG:~ # ser 0(7435) WARNING: fix_socket_list: could not rev. resolve 10.15.200.19 0(7435) WARNING: fix_socket_list: could not rev. resolve 10.21.200.50 0(7435) WARNING: fix_socket_list: could not rev. resolve 10.15.200.19 0(7435) WARNING: fix_socket_list: could not rev. resolve 10.21.200.50 Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 10.15.200.19 [10.15.200.19]:5060 udp: 10.21.200.50 [10.21.200.50]:5060 udp: 10.0.0.11 [10.0.0.11]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 10.15.200.19 [10.15.200.19]:5060 tcp: 10.21.200.50 [10.21.200.50]:5060 tcp: 10.0.0.11 [10.0.0.11]:5060 Aliases: tcp: OEFEG:5060 tcp: OEFEG.fh-joanneum.at:5060 tcp: localhost:5060 udp: OEFEG:5060 udp: OEFEG.fh-joanneum.at:5060 udp: localhost:5060 *: fh-joanneum.at:* 0(7435) init_tcp: using epoll_lt as the io watch method (auto detected) 0(7437) AVPops - initializing OEFEG:~ # 0(7437) Maxfwd module- initializing 0(7437) using 'none' rls-subscription authorization! 0(7437) using 'none' subscription authorization for watcher info! If I try to uncomment the line fifo="/tmp/ser_fifo", I get the following message: OEFEG:~ # serctl start Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed OEFEG:~ # /base/ser/directory/sbin/ser -f /base/ser/directory/etc/ser/ser.cfg 0(7383) parse error (19,5-6): syntax error 0(7383) parse error (19,5-6): unknown config variable 0(7383) parse error (19,7-8): ERROR: bad config file (3 errors) I hope, someone can help me. Thanks, Alois

3 2

[Users] mysql re-install??
by Mark Kent 13 Jun '06

13 Jun '06

Hello, Using openser 1.0.1, I'm trying to add multi-domain support using the module "domain".... so I created a database in mysql, stuffed a few entries in it, pointed at it in openser.cfg, and started openser. I get this: 0(0) ERROR: domain:mod_init(): invalid table version (use ser_mysql.sh reinstall) 0(0) init_mod(): Error while initializing module domain Now, I looked into openser_mysql.h and it has a table "version" that lists versions for various databases: INSERT INTO version VALUES ( 'subscriber', '5'); ... INSERT INTO version VALUES ( 'location', '1001'); INSERT INTO version VALUES ( 'aliases', '1001'); ... INSERT INTO version VALUES ( 'gw_grp', '1'); INSERT INTO version VALUES ( 'lcr', '1'); So, what exactly are these "versions"?? How is it possible that a new database that I create/name/point-at should match something in this static list? Thanks, -mark

2 4

[Users] bad avp flags error
by Raymond Chen 13 Jun '06

13 Jun '06

Dear all, trying to upgrade the 1.0.1 configuration to cvs head to test the path module. I keep getting this error no matter what I do. avp_db_load("$from","s:areacode/areacodes") 0(0) ERROR:avops:parse_avp_db:: error - bad avp flags 0(0) ERROR:avpops:fixup_db_avp: parse failed 0(0) ERROR: fix_actions: fixing failed (code=-1) at cfg line 251 0(0) ERROR: fix_expr : fix_actions error ERROR: error -1 while trying to fix configuration thanks Ray

2 1

[Users] Openser+serweb
by ram 13 Jun '06

13 Jun '06

Hi i have download servweb 0.9.4 and installed in FC5, configured as per the installtion documented when i try to access from web, i get error to install classkit when i install classkit, its not available on that site at all how can i rectify this problem Another problem, how can i make accounting system for the user I dont see rate table in my openser databases,when can i export my rate table and integrate with user for billing ram

1 0

[Users] More debugging info?
by Bret Schuhmacher 13 Jun '06

13 Jun '06

Hello all, I'm trying to debug my OpenSER installation. I've edited the config file, told it not to fork and set debug to various numbers (10,30,100,300). All the debugging is to stdout. The problem is that it seems to stop after initialization - I was hoping to see messages for everything - REGISTRATION, INVITE, etc. How can I get a LOT of debug info? Thanks, Bret

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users