sr-users

sr-users@lists.kamailio.org

9 participants
37393 discussions

SRTP/TLS BYE Problem with One of the Legs of the Call
by conradcordeiro＠gmail.com 20 Sep '20

20 Sep '20

Hello, Thank you for your reading this and for your help. I'm a Kamailio newbie and managed to set up an edge proxy, which works perfectly on UDP traffic. I'm now attempting to deploy TLS/SRTP and everything almost works perfectly. The single issue I'm having is that when either of the parties to an SRTP/TLS call disconnect, the other party's call remains active. With UDP, when one of the parties disconnects the call, the other leg of the call receives the BYE command and the call automatically disconnects. This is how I have our infrastructure set up: 1. Twilio SIP Trunk with Secure Media enabled. 2. Kamailio 5.4.1 set up with TLS module, set to listen on TLS port 5061, SSL certificates from Let's Encrypt, route set to our phone system. 3. Phone system is Asterisk. As per above, everything works almost perfectly with TLS/SRTP. The only issue is that calls will not disconnect when one of the sides hang up. If I disable TLS/SRTP and use UDP only, everything works. Audio is just fine with TLS/SRTP. Does anyone know why calls with SRTP/TLS will not disconnect automatically when one of the parties ends the call? Thank you, Conrad

2 2

Kamailio support for 5g
by Pavithra Mohanraja 18 Sep '20

18 Sep '20

Hi, Does kamailio IMS support for 5g Network functions since in 5g everything is handled via http requests. Could anyone please respond Thanks, Pavithra

3 4

IMS Diameter server module
by Pavithra Mohanraja 18 Sep '20

18 Sep '20

Hi, Can anybody reply what is the exact use of diameter server module. I am unable to understand from the kamailio doc provided. It is mentioned that it converts diameter messages to json messages. But without diameter.xml file, it is not working. Whats the exact use of it. Can i not be able to send the http request alone via Rx interface instead of using diameter.xml file. Kindly reply as i am blocked in this for few days. Thanks, Pavithra

1 0

Connection-oriented socket closure event hooks
by Alex Balashov 18 Sep '20

18 Sep '20

Hi, The `tcpops` module exposes, * event_route[tcp:closed] * event_route[tcp:timeout] * event_route[tcp:reset] These fire on closure of TCP connections and TLS connections. TLS is considered a separate transport in Kamailio, having distinct identifiers in all cases where transport protocol is relevant, configured by separate and specific parameters, and provided by a separate module (tls). But TLS runs on top of TCP, of course, so treating a TLS disconnection as a superset of TCP disconnection makes sense. WebSocket is considered a separate transport in Kamailio, having distinct identifiers in all cases where transport protocol is relevant, configured by separate and specific parameters, and provided by a separate module (websocket). But WebSocket runs on top of TCP, of course... ... yet it doesn't trigger these TCP connection events. Instead, one must use a separate `event_route[websocket_closed]` event route for this. Is there a reason for this inconsistency? I would think that the common denominator of TCP would lead to the same hierarchy of abstraction when it comes to events. It becomes important because if one wishes for Kamailio to log or notify disconnections for vanilla SIP or browser-based clients, one must essentially implement the same code twice. Thank you, -- Alex -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

2 1

webrtc sound problem in version 85.0 google chrome version
by Hamed Rastegar 17 Sep '20

17 Sep '20

Hello I am using kamailio 5.1 for WebRTC (websocket) But in the latest version of Google Chrome (85.0) I have a problem, No sound is transmitted between the source and the destination. This problem does not exist in Firefox browser If you have experience in this field, please comment

4 3

Diameter Messages for Rx
by Pavithra Mohanraja 17 Sep '20

17 Sep '20

Hi, Kindly give me some guidelines on how to convert diameter messages to http messages when establishing connection between PCSCF and PCF Kindly help Thanks, Pavithra

1 0

Few newbie questions
by Adam Rutkowski 17 Sep '20

17 Sep '20

Hi Everyone As I am just dipping my foot in the VOIP waters so please bear with me. Although it may be more appropriate for Freeswitch group I am sure there are plenty of knowledgeable folks here. I'm playing with freeswitch in my lab environment and really like what Kamailio has got to offer. That being said, there are few concepts I need help understanding. Consider this ( for hosted services I suppose ) [image: Screenshot 2020-09-16 at 22.21.22.png] 1 Does this topology seem right ? 2 If Kamailio is used as registar and load balancer, does that mean all domains, extensions must be present on all the FS boxes ? 3 How will auto provisioning work in this case ? Now, in the below scenario, clients have got FS box deployed on prem [image: Screenshot 2020-09-16 at 22.28.09.png] 4 Is there any reason to keep the FS farm ? or Kamailio poxying calls to VOIP providers is enough ? 5 What roles Kamailio could be used for in this case ? 6 Is deploying on prem PBX for a customer a popular solution ? 7 Anyone deployed above on Docker/ Kubernetes ? How's the performance and the bad bits if any ? I do realize this is pretty basic stuff for everyone in here, however, I would appreciate any helpful comments and if there is some good literature/ links you can recommend, I am all ears. Regards Adam

2 1

Kamailio IMS Diameter Messages
by Pavithra Mohanraja 17 Sep '20

17 Sep '20

Hi, Is there any possibility of converting diameter messages to http requests in IMS. Since I am working in 5g based network, In order to connect pcscf to pcf, Rx interface has to be established. But PCF is not accepting diameter messages. It is failing with error "No connected DefaultRoute peer found for app_id 16777236 and vendor id 10415" I used IMS Diameter server since it is mentioned as converting diameter messages to http json messages. But even before calling that diameter server, It is failing with App_id issue. How it works? Need to understand, how the diameter messages are working since in 5g , everything is based on http rest apis. Is there any possibility of connecting to it or there is no support in kamailio IMS for 5g. If you have any idea, please let me know. It will be very useful for me. Thanks, Pavithra

1 0

multi netwotk interface kamailio stops processing packets in one of it's network interfaces although keeps processing in the others
by Nuno Miguel Reis 16 Sep '20

16 Sep '20

Hello everyone. I've started to have an issue with a kamailio 4.4 instance listening on multiple network interfaces where it stops processing SIP on one of it's network interfaces but still continues to work fine on the others. If I restart kamailio everything starts working fine again. I'm using the default 'children=8' and one of my guesses on why this could be happening is that the number of childs processing couldn't be enough. Do you remember anything else on an issue like this where I should be looking? Thanks. -- Nuno Miguel Reis Departamento de Engenharia Informática Faculdade de Ciências e Tecnologia Universidade de Coimbra

4 5

Regular Expression Evaluation
by Mack Hendricks 16 Sep '20

16 Sep '20

I already run into issues with this. If I want to only execute a statement if it’s an INVITE with a request domain of 10.10.*.* how do I format? Below is what I have. I always have to play with it a bit. Looking to get a better understanding. The regular expression tester I’m using states that it’s valid. What am I doing wrong? if ((is_method("INVITE")) && ($rd =~ "10\.10\..+")) { # Do something xlog("fix got a 10.10 address"); } Thanks

5 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users