sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Kamailio Team Attentions
by Amit Pal 15 Aug '20

15 Aug '20

Dear Team, “I am unable to reach you, my previous mail get bounce. I received bounce mail from sr-users. Below is my previous mail contains.” Last Sent Mail Contents I am glad to work with kamailio Team, I am using kamailio freeswitch integration. I want to work like this. My all subscriber register at kamailio. My application server is freeswitch. MY first question: When subscriber kamuser1 and kamuser2 are talking then I want to transfer these two party in freeswitch conference. I am unable to generate re-invite these call . here I was also try with rewritehost(like) but not success. how can we achieve this. My second question : Even MOH not playing when any one party hold the call. I already setup KAMUser1Kamailio(RTPProxy)KAMUser2. I have completely setup the config of rtpproxy and mohqueues. log shows all signal handle by kamailio and RTPProxy but not getting moh. I am attaching my config file for reference. can we do this by mediaproxy with freeswitch ,all thing are configured as document but no success. My third question: Kamailio relay dtmf on sipinfo. How can we get dtmf in between the call and taking actions on it. I am highly thankful for your great support . Thanks Regards Neol

1 0

Required Kamailio clarification!!!
by Amit Pal 15 Aug '20

15 Aug '20

Dear Team, I am glad to work with kamailio Team, I am using kamailio freeswitch integration. I want to work like this. My all subscriber register at kamailio. My application server is freeswitch. MY first question: When subscriber kamuser1 and kamuser2 are talking then I want to transfer these two party in freeswitch conference. I am unable to generate re-invite these call . here I was also try with rewritehost(like) but not success. how can we achieve this. My second question : Even MOH not playing when any one party hold the call. I already setup KAMUser1==>Kamailio(RTPProxy)==>KAMUser2. I have completely setup the config of rtpproxy and mohqueues. log shows all signal handle by kamailio and RTPProxy but not getting moh. I am attaching my config file for reference. can we do this by mediaproxy with freeswitch ,all thing are configured as document but no success. My third question: Kamailio relay dtmf on sipinfo. How can we get dtmf in between the call and taking actions on it. I am highly thankful for your great support . Thanks Regards Neol

1 0

Can the callid be modified/mapped when branching a call?
by Magnus Kelly 14 Aug '20

14 Aug '20

Good evening all, Can I ask what might be a basic question, but I would like to confirm if the CallID field can be modified/mapped when branching a call ? Thanks Magnus

2 2

How to check TLS versions available
by David Cunningham 14 Aug '20

14 Aug '20

Hello, Does anyone know of a method to check what TLS versions are available from Kamailio for clients to use? For example, is TLS 1.0 available, TLS 1.1, etc. Thanks in advance, -- David Cunningham, Voisonics Limited http://voisonics.com/ USA: +1 213 221 1092 New Zealand: +64 (0)28 2558 3782

4 5

Segfault starting kamailio, function "registered"
by Jon Bonilla (Manwe) 14 Aug '20

14 Aug '20

Hi when I start kamailio in my dev system it fails to start and segfaults. Version: 5.4.0 CFG Line: if (registered("kam_location",$tu)) { Log: Aug 14 10:20:29 pekedev2 kamailio: CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 382, column 34-36: function registered: parameter 2 is not constant#012 Aug 14 10:20:29 pekedev2 kernel: [1501045.504630] kamailio[21276]: segfault at 6e6f6974 ip 00005566607d8887 sp 00007ffd6761b240 error 4 in kamailio[55666079d000+431000] Aug 14 10:20:29 pekedev2 kernel: [1501045.504655] Code: 89 bd 68 ff ff ff 64 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 48 83 bd 68 ff ff ff 00 0f 84 f5 09 00 00 48 8b 85 68 ff ff ff <8b> 00 83 f8 01 0f 85 65 09 00 00 48 8b 85 68 ff ff ff 8b 40 0c 85 The coredump is not clear to me. I extracted using coredumpctl (fuck you systemd) and running gdb. Is there a new method now that systemd has taken control of my systems? cheers, Jon -- PekePBX, the multitenant PBX solution https://pekepbx.com

2 1

conditional on secfilter seems does not work or how to do it
by PICCORO McKAY Lenz 14 Aug '20

14 Aug '20

I implemented secfilter in a simple way, in first step routing put that conditional for black list check that already works: ``` secf_check_ip(); if ($? == -2) { xlog("L_ALERT", "$rm from $si is blacklisted"); drop(); } ``` BUT NOW i want to change to whitelick checks, so i reviewed the docs and "2" is resulting for whitelist, so then i said "if not whitelisted so block" using "!= 2" as on https://www.kamailio.org/wiki/cookbooks/5.3.x/core#operators BUT SEEMS DOES NOT WORK: that is the code: ``` secf_check_ip(); if ($? != 2) { xlog("L_ALERT", "$rm from $si is not in whitelist, block"); drop(); } ``` when i tested all the calls passed not matter if are in the table or not as whitelist! I want able to call only if are present and whitelisted the ip address.. so i also tested with: ``` secf_check_ip(); if ($? == 0) { xlog("L_ALERT", "$rm from $si is not present, so block"); drop(); } ``` to check if the ip address are presented in the table but call also passed and must not cos i not put never a entry in the table! Lenz McKAY Gerardo (PICCORO) http://qgqlochekone.blogspot.com

3 3

Kamailio drop call with Teams
by sip user 13 Aug '20

13 Aug '20

Hi, I'm connecting Teams with kamailio server. From Kamailio to teams I have no problems, but from teams to Kamailio yes. Drop the call.. With ngrep I see that: INVITE: [image: imagen.png] 200 OK: [image: imagen.png] I never received ACK.. In my configuration: Kamailio.cfg: #!KAMAILIO #!define WITH_TLS event_route[tm:local-request] { if(is_method("OPTIONS") && $ru =~ "pstnhub.microsoft.com") { append_hf("Contact: <sip:FQND:5061;transport=tls>\r\n"); } xlog("L_INFO", "Sent out tm request: $mb\n"); } request_route{ remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { xlog("L_INFO","$fU is trying to call to $rU con valores $tu\n"); $ru = "sip:" + $rU + "@ip asterisk:port"; route(RELAY); } } What I'm doing wrong? I don't understand why not received ACK.. Could anyone help me? Thanks

1 0

Kamailio lookup via Rest Interface
by krishdinesh＠yahoo.com 13 Aug '20

13 Aug '20

Hi, I am trying to do the following and wanted to seek help on how this can be done in Kamailio and if it feasible to do this. If not, whether there are other ways to do this. I would like to do the following .. If there is an incoming call, kamailio should be able to send the incoming calling number to an external application via Rest Interface, the external application will return a response on what to do with this call, it can be simple as sending a call to the called extension or a media server like asterisk for further treatment. I have a kamailio version 5.3.5 running on CentOS 7. I have a few end points registered to kamailio and they are able to call each other Any help would be appreciated. Thank you. Dinesh

1 0

Kamailio v5.4.0 RPM Availability
by Asgaroth 13 Aug '20

13 Aug '20

Hi all, I would just like to check in and find out if/when the Kamailio v5.4.0 rpm's will be available on the OpenSUSE build service. Thanks to all involved for all the hard work in this new release! Thanks There are two major products that came out of Berkeley: LSD and UNIX. We don't believe this to be a coincidence. -- Jeremy S. Anderson 00asgaroth00(a)gmail.com (https://link.getmailspring.com/link/146DE51A-E8C2-4126-B8D5-EA45E62CBA11@ge…)

4 14

smsops module - status report?
by Pafel 13 Aug '20

13 Aug '20

Hello, I am trying to generate sms status report using smsops module but without success. I couldn't find any example on the net. Can somebody help me? According to https://en.wikipedia.org/wiki/GSM_03.40 TP-MTI (tpdu(type) in kamailio) should be "1 0" for status report. Delivery is "0 0" and submit "0 1". According to the provided examples in smsops module: tpdu(type) = 4 is delivery tpdu(type) = 1 is submit So what's the number for status? I could't find the mapping in the code. Only this: // Types of the PDU-Message typedef enum _pdu_message_type { DELIVER = 0x00, SUBMIT = 0x01, COMMAND = 0x02, ANY = 0x03, } pdu_message_type_t; So any hint or example is appreciated. Thanks, Pavel Siderov

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users