sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Change Record Route onreply
by Aidar Kamalov 11 Aug '20

11 Aug '20

Hello, I have kamailio with only one interface. Is it possible to set one RR - lan ip address to INVITEs (to dispatcher list members) and 127.0.0.1 to replies 200OK (to softphone)? I can't use record_route() function in onreply route because: Command cannot be used in the block. -- Aydar A. Kamalov

2 2

dns_naptr_ignore_rfc default value
by Juha Heinanen 10 Aug '20

10 Aug '20

What is the point of dns_naptr_ignore_rfc default value: dns_naptr_ignore_rfc If the DNS lookup should ignore the remote side's protocol preferences, as indicated by the Order field in the NAPTR records and mandated by RFC 2915. dns_naptr_ignore_rfc = yes | no (default yes) In my (and RFC 2915's) opinion the default should be 'no'. -- Juha

2 3

CallerID - multiple ISP Prefix
by Ilie Soltanici 10 Aug '20

10 Aug '20

Hello, We are using a few carries where we are sending calls to, each of them is using a special prefix in the From header in order to manage the callerid. Some of them are not recognizing headers like P-Asserted-Identity or Remote-Party-ID, so for them we have to replace the From header with the corresponding prefix. The way we do - it's by using the uac_replace_from function, which works fine. The problem is when we are sending the same call to the failover trunk, and that trunk is using a different prefix. We have to call again the uac_replace_from function which is appending the new prefix to the existing one, something like: From: <sip:12345@domain.localsip:+12345@domain.local>;tag=as404cb50c I was trying to use uac_restore_from() function and call again uac_replace_from, but the result is the same. Is there any way to call the uac_restore_from function twice for the same call? Thank you.

3 3

Preprocessor ERROR! on upgrading to 5.4.0
by sagar malam 08 Aug '20

08 Aug '20

Hello , I was using Kamailio 5.3.3 . After upgrading to 5.4.0 i am getting below error with same cfg file which worked well with 5.3.3. 0(102523) ERROR: <core> [core/ppcfg.c:235]: pp_ifdef_level_error(): different number of preprocessor directives: 2 more #!if[n]def as #!endif What does this mean? Any clue to solve this? -- Thanks, Sagar

2 2

In memory ISP Info
by Ilie Soltanici 07 Aug '20

07 Aug '20

Hello, What will be the best way to save ISP Information in Kamailio memory? I have the following information for each ISP into the DB: *ISP Name | ISP IP | ISP Username | ISP Password | ISP Prefix* ISP1 | 1.1.1.1 | user | pass | 1234 This info it's not changed/updated too often, so I want to avoid querying the DB on every call and get this info directly from the memory. I was thinking to use htable for that, so I created a htable as an array for that and loaded all the information there manually, something like that: *kamcmd htable.sets isp ISP1[address] 1.1.1.1* * kamcmd htable.sets isp ISP1[username] user* * kamcmd htable.sets isp ISP1[password] pass* * kamcmd htable.sets isp ISP1[prefix] 1234 * *$sht( isp => ISP1[address]) == "1.1.1.1"* * $sht( isp => ISP1[username]) == "user" * * $sht( isp => ISP1[password]) == "pass" * * $sht( isp => ISP1[prefix]) == "1234" * So far so good, I'm able to get this information from the htable and use it whenever I need it. Now, the problem comes when I want to load all this information automatically from the DB. How can I setup htable module to get the array key (address, username...) from the database automatically on server restart, and append this array_key to the column value? I've tried this way: modparam("htable", "htable", "isp=>size=8;dbtable=isp;cols='trunk_name[address],trunk_address'") But it's not working unfortunately, getting back this error: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '[address]' If I'm setting this way: modparam("htable", "htable", "isp=>size=8;dbtable=isp;cols='trunk_name,trunk_address'") and setting trunk_name value to: ISP1[address], then it's working fine, but in this case I will have to create by one column for each array key, which may be confusing and it's a lot of unnecessarily information into the DB. Is it possible to do that, or better to trigger a script on each restart which will load this information from the DB into htable? Thanks

2 2

Using wildcard certificates for Kamailio server
by Leonid Fainshtein 07 Aug '20

07 Aug '20

Hello, Is it permitted to use the wildcard TLS certificates for Kamailio server? In reality, it works (tested with v.5.4) but the RFC-5922 disables the wildcard certificates usage: "Implementations MUST match the values in their entirety: Implementations MUST NOT match suffixes. For example, "foo.example.com" does not match "example.com". Implementations MUST NOT match any form of wildcard, such as a leading "." or "*." with any other DNS label or sequence of labels. For example, "*.example.com" matches only "*.example.com" but not "foo.example.com". Similarly, ".example.com" matches only ".example.com", and does not match "foo.example.com". (Ref.:https://tools.ietf.org/html/rfc5922#section-7.2) To be honest, I don't understand why this restriction is good for... Is somebody aware of a newer RFC that removes this limitation? Best regards, Leonid Fainshtein

4 4

Deletion of Prometheus metrics
by Marat Gareev 07 Aug '20

07 Aug '20

Hello, I have confuse about this timeout: https://www.kamailio.org/docs/modules/devel/modules/xhttp_prom.html#xhttp_p… Is there reason for forced deletion of unused metrics? Let's imagine a situation: Zabbix reads metrics at a certain interval, unused metrics are deleted if they are not used for a period of time (xhttp_prom_timeout). I drew 2 cases when Zabbix will receive the same value, but we cannot say unambiguously whether these are new values or not. [image: xhttp_prom_timeout.jpg] Regards, Marat

2 4

Route to PSTN no works
by sip user 07 Aug '20

07 Aug '20

Hi, I have kamailio connect to Teams, and works form Asterisk -> Teams calls. For Teams -> Asterisk calls I'd worked using extension and register Asterisk with that extension. But I'd like to use direct routing with IP. In kamailio.cfg I activate define WITH_PSTN. I configured the IP and PORT for my PSTN. I'm using the default route[PSTN]: route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined xlog("L_INFO","PSTN ACTIVADO"); if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")){ xlog("L_INFO", "Error en el formato numerico!!"); return; } # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } # normalize target number for pstn gateway # - convert leading 00 to + #if (starts_with("$rU", "00")) { # strip(2); # prefix("+"); #} if (strempty($sel(cfg_get.pstn.gw_port))) { #$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); xlog("L_INFO","SELECCION CON PUERTO"); $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } else { xlog("L_INFO","SELECCION CON PUERTO"); $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } route(RELAY); exit; #!endif return; } And in my request_route: remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { if($src_ip != "IP ASTERISK"){ xlog("L_INFO", "***********ROUTE PSTN***********"); route(PSTN); } else { xlog("L_INFO","LLamada desde $si con puerto $sp"); record_route_preset("FQND:5061;transport=tls", "IP KAMAILIO:5060"); add_rr_param(";r2=on"); route(DISPATCH); route(RELAY); } } But never see that the call go to PSTN route.. I'd made any wrong?? Thanks

3 2

Info: 2 Kamailio presentations soon live at ClueCon - 1:30pm CST (20:30 Berlin)
by Daniel-Constantin Mierla 06 Aug '20

06 Aug '20

Hello, quick info for those that want to watch the 2 presentations about Kamailio at ClueCon Deconstructed, starting in about 1 hour 40 minutes from now (or 13:30CST, 20:30Berlin/Paris/Madrid/...). One will be done by me and the 2nd by Fred Posner. A few more details are available at: - https://www.kamailio.org/w/2020/07/cluecon-deconstructed-2020/ The sessions should be live streamed on youtube - should appear in the freeswitch channel there at the time of start: - https://www.youtube.com/c/FreeSWITCH/ Of you can join the video conference room for a more interactive participation -- broadcast room listed at: - https://cluecon.cantina.video/#/home Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla

2 2

Audio on Calls Stopping After 15 Minutes
by admin＠conradit.com 06 Aug '20

06 Aug '20

All, hi: I'm a Kamailio newbie! I've managed to set up a proxy server with the minimal configuration file found here: https://github.com/kamailio/kamailio/blob/master/misc/examples/mixed/kamail…. The issue that I'm having is that the audio on calls simply stop precisely after 15 minutes. It's always precisely at 15 minutes. The calls continue connected but without any audio. A summary about my set up: 1. This is an Amazon AWS EC2 server so it doesn't have a public IP directly attached to the interface. This makes me believe that the issue might be related to NAT. 2. I use Flowroute as the SIP trunk for these tests. 3. My phone system, for testing purposes, works on UDP port 6060 an the RTP ports are 20,000 to 30,000. 4. I am not using, for the time being, TLS nor SRTP. 5. My phone system is inside the same subnet as the Kamailio server. Questions: 1) Am I missing the NATHELPER module and if so how could we combine it to the minimal proxy configuration described above? Assuming that my Kamailio server uses local IP 10.80.10.5 and the PBX 10.80.10.6, both on UDP port 6060 for SIP. 2) May I simply combine the example file for nathelper.cfg as per this URL: https://github.com/kamailio/kamailio/blob/master/misc/examples/mixed/nathel… to the proxy example files, change IP addresses, ports, etc.? If not, how would one go about adding the NATHELPER module to the minimal proxy configuration? 3) Could it be some other issue that is causing the 15-minute interruption on audio? Thank you so much for your help!

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users