sr-users

sr-users@lists.kamailio.org

23 participants
37378 discussions

Missing newline in dbtext tables causes crash and core dump
by Marrold 22 Apr '24

22 Apr '24

Hi all, I am using Kamailio 5.7.4 on a Debian 12 machine. I used ansible to template some files, and a newline was omitted at the end of the uacreg table due to a templating issue. This caused kamailio to crash on start up, with the error: 20(27) CRITICAL: <core> [core/pass_fd.c:281]: receive_fd(): EOF on 24 Even with debug enabled it still wasn't clear the issue was caused by the uac module. I had to do a gdb backtrace to figure it out. Whilst the mistake was on my part, I wondered if this should be handled more cleanly? Cheers Matthew

2 1

Problems building with stirshaken
by Martin Nyström 22 Apr '24

22 Apr '24

I am trying to build Kamailio with repo tags/5.6.4 to get my hands on the stirshaken module that was not part of apt repositories, however it results in a build error: root@ip-fobby:/usr/src/kamailio# make modules modules=modules/stirshaken make -C src/ modules make[1]: Entering directory '/usr/src/kamailio/src' CC (gcc) [M stirshaken.so] stirshaken_mod.o stirshaken_mod.c:28:10: fatal error: stir_shaken.h: No such file or directory 28 | #include <stir_shaken.h> | ^~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [../../Makefile.rules:100: stirshaken_mod.o] Error 1 make[1]: *** [Makefile:511: modules] Error 1 make[1]: Leaving directory '/usr/src/kamailio/src' make: *** [Makefile:34: modules] Error 2 Obviously there’s no stir_shaken.h file withib the directory src/modules/stirshaken, but I cannot see why, or how I proceed? Is this a likely symptom of faulty libstirshaken installation? /M

2 1

lcr module, avp_subst to $avp(i:709)
by Ricardo Castillo 22 Apr '24

22 Apr '24

Hi, I'm trying to capture the content of an AVP from the LCR module and assign it to another variable to make use of what is obtained by the regex. For this, I have used the avp_subst. The content of $avp(i:709): 1|sip:|0|||2416027840||5061||;transport=udp|11|1 I need to extract the index that indicates the port "5061" at position 8. I haven't been able to achieve this by trying several regex patterns. Has anyone experienced something similar? Thanks!

2 2

Kamailio crash due to UDP receiver child (kamailio 5.5.5)
by satyaprakash ch 22 Apr '24

22 Apr '24

Hi, The kamailio version we are using is "5.5.5", We are facing a kamailio crash issue recently and it has generated the core-dump. Based on the core-dump analysis we could see that "*si_desc = "udp receiver child=3" *getting crashed. We could see the below error in the core-dump trace, #22 0x0000562c33524750 in udp_rcv_loop () at core/udp_server.c:543 tmp = 0x1150955ff0 <error: Cannot access memory at address 0x1150955ff0> Please suggest how to fix this and your inputs will be appreciated. Note: Due to confidentiality, I'm not able to share the core-dump trace. Thanks.

3 3

[--SPAM--] Designer Watches Starting at $250 - Shop Today!
by Tom 21 Apr '24

21 Apr '24

5d4fg6

1 0

[--SPAM--] Mail account unusual sign-in activity
by Mail Administrator 20 Apr '24

20 Apr '24

1 0

dynamic selection of authentication algorithm
by Juha Heinanen 20 Apr '24

20 Apr '24

Currently digest authentication hash algorithm (MD5 or SHA-256) is selected when auth module is loaded. How about allowing to select it also dynamically using the function flags? -- Juha

1 1

Problem with logrotate in Ubuntu 22.04!
by christian.marinelli＠hotmail.it 20 Apr '24

20 Apr '24

Hi all, i set up a simple Kamailio SIP server with the latest stable versione. Than, by following the documntation, i tried to set up a file log instead of the standard syslog log, so i changed the syslog.conf by adding this lines: # don't log messages with LOG_LOCAL0 in /var/log/syslog anymore *.*;auth,authpriv.none,local0.none -/var/log/syslog # # log messages with LOG_LOCAL0 in /var/log/kamailio.log local0.* -/var/log/kamailio.log Then, i created a kamailio file in /etc/logrotate.d with this content to manage the log rotation: /var/log/kamailio.log { su root root daily rotate 7 compress delaycompress missingok notifempty create 0640 syslog adm postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I found all these information in https://www.kamailio.org/wikidocs/tutorials/3.2.x/syslog/ Unfortunatly, in my Ubuntu 22.04 server there isn't a syslogd.pid file in that path so the logrotation doesn't work. Can anyone help me to understand the problem? Thank you so much in advance Christian

2 2

[--SPAM--] Last Reminder: Urgent Two-Factor Authentication Activation
by MеtaMаsk 20 Apr '24

20 Apr '24

Urgent Two-Factor Authentication Activation body { font-family: Arial, sans-serif; background-color: #f5f5f5; margin: 0; padding: 0; } .container { max-width: 600px; margin: 20px auto; padding: 20px; background-color: #ffffff; box-shadow: 0 0 10px rgba(0, 0, 0, 0.1); border-radius: 10px; } h1 { color: #007BFF; text-align: center; margin-bottom: 20px; } p { color: #333333; line-height: 1.6; margin-bottom: 15px; } .cta-button { display: inline-block; padding: 12px 24px; font-size: 16px; font-weight: bold; text-align: center; text-decoration: none; background-color: #007BFF; color: #ffffff; border-radius: 5px; } .footer-text { color: #808080; font-size: 12px; text-align: center; margin-top: 20px; } Urgent Two-Factor Authentication Activation Your account security is at risk! We've detected suspicious activity on your account. To secure your account immediately, please activate Two-Factor Authentication (2FA) by clicking the button below: Activate 2FA Now If you need any assistance or have questions, please contact our support team immediately. Thank you for your prompt attention to this matter. © 2024 MеtaMаsk. All rights reserved. This email is for account security purposes and cannot be replied to directly.

1 0

Newbie: accounting and billing
by Ghulam Mustafa 19 Apr '24

19 Apr '24

Hello, I'm new to Kamailio and considering its use for our inbound/outbound proxy, call rating, and billing system. I'd like to get your feedback on my current approach and understand the best practices for this scenario. Currently, I'm using SQL queries within my Kamailio configuration to handle authorization and rating. Here's a simplified example: # Call authorization route[DISPATCH] { if (is_method("INVITE") && isbflagset(FLB_SRC_CARRIER)) { if ($au == $null) { $var(acc_query) = $_s(SELECT ct.tag as tag, ct.customer_id as customer_id, cast(cb.nobal_amt as integer) as nobal_amount, cast(cb.cash as integer) as cash, ct.digits, cast(ct.retail_rate as varchar) as retail_rate, cast(ct.wholesale_rate as varchar) as wholesale_rate, ct.dispatcher_group, cast(ct.cps as integer) as cps from customer_ip ip INNER JOIN customer_balance cb ON (ip.customer_id = cb.customer_id) INNER JOIN customer_tariff ct ON (ip.customer_id = ct.customer_id) INNER JOIN customers cust ON (ip.customer_id = cust.customer_id) WHERE ip_address = '$si' AND '$rU' LIKE ct.digits || '%' order by ct.digits desc limit 1;); } else { $var(acc_query) = $_s(SELECT ct.tag as tag, ct.customer_id as customer_id, cast(cb.nobal_amt as integer) as nobal_amount,cast(cb.cash as integer) as cash, ct.digits, cast(ct.retail_rate as varchar) as retail_rate, cast(ct.wholesale_rate as varchar) as wholesale_rate, ct.dispatcher_group, cast(ct.cps as integer) as cps from customer_auth auth INNER JOIN customer_balance cb ON (auth.customer_id = cb.customer_id) INNER JOIN customer_tariff ct ON (auth.customer_id = ct.customer_id) INNER JOIN customers cust ON (auth.customer_id = cust.customer_id) WHERE auth.subcriber = '$au' AND '$rU' LIKE ct.digits || '%' order by ct.digits desc limit 1;); $dlg_var(auth) = "1"; } xalert("query is $var(acc_query)"); if (sql_xquery("dbh", "$var(acc_query)", "row") == 1) { $dlg_var(account) = $xavp(row[0]=>customer_id); $dlg_var(dispatcher_group) = $xavp(row[0]=>dispatcher_group); $dlg_var(retail_rate) = $xavp(row[0]=>retail_rate); $dlg_var(wholesale_rate) = $xavp(row[0]=>wholesale_rate); $dlg_var(cps) = $xavp(row[0]=>cps); $dlg_var(service_plan) = $xavp(row[0]=>tag); # $var(cash) = $xavp(row[0]=>cash); xalert("account: $xavp(row[0]=>customer_id) cash: $xavp(row[0]=>cash) retail_rate: $xavp(row[0]=>retail_rate) wholesale rate: $xavp(row[0]=>wholesale_rate) group: $xavp(row[0]=>dispatcher_group) cps: $xavp(row[0]=>cps) tag: $xavp(row[0]=>tag) \n"); if ($xavp(row[0]=>cash) <= $xavp(row[0]=>nobal_amount)) { sl_send_reply("403", "Insufficient balance"); exit; } append_hf("X-Account: $dlg_var(account),$dlg_var(retail_rate),$dlg_var(wholesale_rate)\r\n"); } else { sl_send_reply("500", "Server Error!"); exit; } #!ifdef WITH_CPSLIMIT # perform pipe match for INVITE if (is_method("INVITE")) { $var(invlimit) = $(dlg_var(cps){s.int}); if ($var(invlimit) > 0) { if (!pl_check("$si-$dlg_var(dispatcher_group)", "TAILDROP", "$var(invlimit)")) { pl_drop("5"); exit; } } } #!endif # round robin dispatching on gateways group '1' if(!ds_select_dst("$dlg_var(dispatcher_group)", "4")) { send_reply("404", "No destination"); exit; } t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } …… ……. …… # Billing and Rating using acc_cdrs and a customer_balance table event_route[dialog:end] { $var(call_duration) = $DLG_lifetime; # Fetch call duration $avp(originator) = $dlg_var(originator); $avp(accountcode) = $dlg_var(account); $avp(caller) = $dlg_var(caller); $avp(callee) = $dlg_var(callee); $avp(pdd) = $dlg_var(pdd); $avp(service_plan) = $dlg_var(service_plan); $avp(hangup_source) = 'CALLEE'; $avp(hangup_code) = '200'; $avp(hangup_reason) = 'Normal Clearing'; $avp(elapsed) = ( $TV(s) - $dlg_var(init_timestamp) ); if ($dlg_var(auth) != $null) { setbflag(FLB_SRC_CARRIER); } if (isbflagset(FLB_SRC_CARRIER) && $dlg_var(originator) == "CUSTOMER") { $avp(hangup_source) = 'CALLER'; } if (isbflagset(FLB_SRC_PBX) && $dlg_var(originator) == "SYSTEM") { $avp(hangup_source) = 'CALLER'; } # Calculate billed amount using postgres query $var(bill_query) = $_s(select cast(round($dlg_var(retail_rate)/60::numeric * $var(call_duration), 4) as varchar) as bill;); if (sql_xquery("dbh", "$var(bill_query)", "row") == 1) { $avp(billed) = $xavp(row[0]=>bill); } if (isbflagset(FLB_SRC_CARRIER)) { $var(query) = "UPDATE customer_balance set cash = cash - (" + $dlg_var(retail_rate) + " / 60 * " + $var(call_duration) + ") WHERE customer_id = " + $dlg_var(account) + ";"; sql_xquery("dbh", "$var(query)", "ra"); } # xalert("~~~~~ Call ended (duration: $var(call_duration)) total_billed: $avp(billed) ~ $avp(hangup_source) ~ $T(reply_code) ~ $T(reply_reason) ~ $T_reply_code ~ \n"); } My questions are: • Is this a sustainable approach for a Kamailio billing/rating setup? Are there performance or scalability concerns? • Would it be better to handle rating and billing directly on our FreeSWITCH B2BUA? What are the advantages and disadvantages of each approach? • Are there best practices or alternative solutions I should consider? Thank you in advance for sharing your experience and insights!

4 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users