8 Dec
2005
8 Dec
'05
6:23 p.m.
hi klaus,
I have the loose route block in my cfg file. I handle both the nated clients as well as
non-nated clients in the loose route section properly.
Actually the problem is I suppose with the audio codes gateway that I use. When I tried
to transfer using an x-ten softphone the call was transferred sucessfully.
If anybody has some idea about what setting must be done, kindly share it with me.
thanks a lot for your response.
jayesh
Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
Probably you have problems with relaying of in-dialog requests. Many
phones send a reINVITE just before the call transfer, to put the
original participant "on hold".
Do you have a
if (loose_route()) {
t_relay();
}
block in your openser.cfg?
klaus
Jayesh Nambiar wrote:
hi klaus,
Thanx for your response. I have hard phones connected to Audio codes
4-port gateway. The gateway is configured to send the calls to openser
for processing. suppose there are three users connected to it.
user1 calls user2. The call goes through. Now user 2 presses flash and
tries to call user3, but both the phone gets disconnected.
I did an ngrep and what i noticed was this:
When user2 tries to transfer the call to user 3, the "INVITE" goes from
user2 to user1 again and the call gets disconnected due to request
timeout. I am not able to see any REFER method in the ngrep.
Any advice will be appreciated.
Thanx again.
Jayesh
*/Klaus Darilion /* wrote:
Yes, REFER method is for call transfer. Which clients do you use? Does
the call orginate also from a SIP phone or from a gateway? What exactly
is the problem? Do you see the REFER request? Including an "ngrep port
5060" would be useful.
klaus
Jayesh Nambiar wrote:
---------------------------------
Yahoo! India Matrimony: Find your partner now.
hi everyone,
I was just trying to transfer the call to another user. All users
are
registered at the same openser server. Now when I
receive a call,
is it
not possible to transfer the call to another IP
user.
I thought REFER mehtod does this, but i think I am wrong. Is this
possible, can somebody pls clear my understanding regarding this
concept.
thanks in advance!!
jayesh
------------------------------------------------------------------------
Enjoy this Diwali with Y! India Click here
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
Yahoo! India Matrimony : Find your partner now.