11 Apr
2005
11 Apr
'05
10:37 p.m.
Could you send the output for the following commands:
sh diag
sh vfc <n> technology
sh vfc <n> version vcware
sh vfc <n> version dspware
Regards
Alberto Cruz
Welesley Sibelson Dias wrote:
thks Steve but
i update my ios to IOS (tm) 5300 Software (C5300-IS-M), Version 12.3
(10),RELEASE SOFTWARE (fc3)
and enter :
tahoGWPSTNUDI(config)# voice class codec 2
tahoGWPSTNUDI(config-class)# codec preference 1 g711ulaw
^
% Invalid input detected at '^' marker.
tahoGWPSTNUDI(config-class)# codec preference 2 g729r8 bytes 40
^
% Invalid input detected at '^' marker.
tahoGWPSTNUDI(config-class)# codec preference 3 g723r63 bytes 96
^
% Invalid input detected at '^' marker.
tahoGWPSTNUDI(config-class)# codec preference 4 g726r16 bytes 80
^
% Invalid input detected at '^' marker.
tahoGWPSTNUDI(config-class)# codec preference 5 gsmfr bytes 132
^
% Invalid input detected at '^' marker.
but dont work please send me
dir flash result:
Em Seg 11 Abr 2005 19:59, você escreveu:
12.1 is pretty old from a Cisco SIP perspective.
I'd encourage you
to upgrade to a newer release, preferrably 12.3(x), and then try:
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g729r8 bytes 40
codec preference 3 g723r63 bytes 96
codec preference 4 g726r16 bytes 80
codec preference 5 gsmfr bytes 132
You can list which ever codecs are most important
for your application.
This is just an example.
-Steve
Welesley Sibelson Dias wrote:
>I have one AS5300 with :
>Cisco Internetwork Operating System Software
>IOS (tm) 5300 Software (C5300-JS-M), Version 12.1(1)T, RELEASE SOFTWARE
>(fc1) Copyright (c) 1986-2000 by cisco Systems, Inc.
>Compiled Sun 19-Mar-00 01:19 by ccai
>Image text-base: 0x600088F8, data-base: 0x61150000
>
>ROM: System Bootstrap, Version 11.2(9)XA, RELEASE SOFTWARE (fc2)
>BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE
>SOFTWARE ()
>
>tahoGWPSTNUDI uptime is 3 minutes
>System returned to ROM by reload at 00:06:02 UTC Sat Jan 1 2000
>System image file is "flash:c5300-js-mz.121-1.T"
>
>cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of
>memory.
>Processor board ID 10080984
>R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
>Channelized E1, Version 1.0.
>Bridging software.
>X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>TN3270 Emulation software.
>Primary Rate ISDN software, Version 1.1Backplane revision 2
>Manufacture Cookie Info:
>EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
>Board Hardware Version 3.2, Item Number 73-2414-6,
>Board Revision C0, Serial Number 10080984,
>PLD/ISP Version 255.255, Manufacture Date 14-Oct-1998.
>1 Ethernet/IEEE 802.3 interface(s)
>1 FastEthernet/IEEE 802.3 interface(s)
>35 Serial network interface(s)
>240 terminal line(s)
>8 Channelized E1/PRI port(s)
>128K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>8192K bytes of processor board Boot flash (Read/Write)
>
>Directory of flash:/
>
> 1 -rw- 9358184 <no date> c5300-js-mz.121-1.T
> 2 -rw- 465798 <no date> pw.2711.ios
>
>
>but i can't configure codecs
>i enter into voice-class e
>enter preference codec but don't accept
>somebody know with more need me .
>
>
>thks a lot
>Welesley Sibelson Dias
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers