[Serusers] Re: Re: Using IP address as domain

Hi andrey, I have made follwing changes in ser.cfg listen="202.87.x.x" alias="202.87.x.x" #export SIP_DOMAIN = 202.87.x.x when I run # /etc/rc.d/init.d/ser restart I get this log ----------------------log starts here ------------------------- Starting ser: 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x 0(5116) WARNING: fix_socket_list: could not rev. resolve 202.87.x.x WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing textops - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 Listening on udp: 202.87.x.x [202.87.x.x]:5060 tcp: 202.87.x.x [202.87.x.x]:5060 Aliases: *: 202.87.x.x:* 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) ERROR: udp_init: bind(6, 0x810237c, 16) on 202.87.x.x: Cannot assign requested address [FAILED] [root@oradb1 /]# ----------------------log ends here ------------------------- Regards Mukesh From: "Andrey Kuprianov" <andrey.kouprianov(a)gmail.com> Subject: Re: [Serusers] Using IP address as domain To: serusers(a)iptel.org Message-ID: <ab5f5bda0609210935y71edb46ci6ea9966b170e52de(a)mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi, AFAIK, SIP_DOMAIN you need to export anyway.. Just put your IP instead of the name. Then this SIP_DOMAIN will be used to properly add contacts to your subscriber table. So, if your domain is an IP address, newly added ppl will have an IP instead of domain for their host part of URI. Try also to specify alias as you IP address, i.e. listen="202.x.x.x" alias="202.x.x.x" You may also try to add a domain entry to the domain table with serctl (that is if you use functions in your config such as "is_uri_host_local()"), i.e. serctl domain add 202.x.x.x Hope it will work for you. Andrey. On 9/20/06, mukesh <mukesh(a)hungama.com> wrote: do