Hi!I've 2 asterisk at home and I use openser becouse I want use more proxies for my softphones;my problem is this: I'm using vrrp protocol; 192.168.25.1 is the master (asterisk1) 192.168.25.2 is the slave (asterisk2) 192.168.25.200 is the virtual IP. then I have my softphones on a Xp pc with IP 192.168.25.10
I set my softphones with 192.168.25.200 and they run, only that, the problem with asterisk is that softphones and IP phones(some like wi-fi) can register only one proxy, and asterisk can't make a option for more proxies than one;so the proxy is the 192.168.25.200, but at real it is 192.168.25.1..andsoftphones or wi-fi are registered only in the first asterisk with the 192.168.25.1..if the master falls down the slave hasn't the authentication SIP registration...only the master..So I must use openser or ser to have 2 = box
my problem is resolved only if I use the redirect option to have 2 = asterisk box so the database can be opened and read from one asterisk to the other;if the master falls down the slave has all the configuration and the SIP registration, so it can work without problems.
A) I've set this file on asterisk 192.168.25.1 the master
# # $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $ # # demo script showing how to set-up usrloc replication #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E)
# ------------------ module loading ----------------------------------
loadmodule "modules/mysql/mysql.so" loadmodule "modules/sl/sl.so" loadmodule "modules/tm/tm.so" loadmodule "modules/maxfwd/maxfwd.so" loadmodule "modules/usrloc/usrloc.so" loadmodule "modules/registrar/registrar.so" loadmodule "modules/auth/auth.so" loadmodule "modules/auth_db/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# digest generation secret; use the same in backup server; # also, make sure that the backup server has sync'ed time modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); return; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# verify credentials if (!www_authorize("", "subscriber")) { www_challenge("", "0"); return; };
# if ok, update contacts and ... save("location"); # ... if this REGISTER is not a replica from our # peer server, replicate to the peer server if (!src_ip== 192.168.25.2) { t_replicate("192.168.25.2", "5060"); }; return; }; # do whatever else appropriate for your domain log("non-REGISTER\n"); }; }
B) I've set this file on asterisk 192.168.25.2 the slave
# # $Id: replicate.cfg,v 1.2 2005/07/25 16:27:33 miconda Exp $ # # demo script showing how to set-up usrloc replication #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E)
# ------------------ module loading ----------------------------------
loadmodule "modules/mysql/mysql.so" loadmodule "modules/sl/sl.so" loadmodule "modules/tm/tm.so" loadmodule "modules/maxfwd/maxfwd.so" loadmodule "modules/usrloc/usrloc.so" loadmodule "modules/registrar/registrar.so" loadmodule "modules/auth/auth.so" loadmodule "modules/auth_db/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# digest generation secret; use the same in backup server; # also, make sure that the backup server has sync'ed time modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); return; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); return; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# verify credentials if (!www_authorize("", "subscriber")) { www_challenge("", "0"); return; };
# if ok, update contacts and ... save("location"); # ... if this REGISTER is not a replica from our # peer server, replicate to the peer server if (!src_ip== 192.168.25.1) { t_replicate("192.168.25.1", "5060"); }; return; }; # do whatever else appropriate for your domain log("non-REGISTER\n"); }; }
Must I call this file ser.cfg?Right?Must I set the
on the master
listen=192.168.25.1 #on the master
port=5060
on the slave
listen=192.168.25.2 #on the slave
port=5060
Then I use on all the 2 linux;
#chkconfig -add ser
#chkconfig -add mediaproxy
And ser and mediaproxy works like deamon every time I start-up the 2 linux.
Is it right to add this 2 sip number in openser or ser in this way?(they're registered in asterisk and 650 is a number from a X-lite, 651 from Phoner)
serctl add 650 1234 650@192.168.25.200 [mailto: 650@192.168.25.200] serctl add 651 1234 651@192.168.25.200 [mailto: 651@192.168.25.200]
Is it right this configuration?If the master falls down the slave has all the Sip registration authentificated and run without any problem?
100000 thanks!