RE: [Serusers] xlite and ser

If you run a SIP client and the SER proxy on the same box (and assuming same IP address since you've left Auto-detect-IP = yes), you need to configure the client to listen to a different port than the standard 5060 which SER is already listening on. On XLite, you can change this in System Settings -> Network. Regards, -David ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of zahra bahar Sent: 11 January 2007 09:31 To: serusers(a)lists.iptel.org Subject: [Serusers] xlite and ser my configure in xlite:in system setting in network I put these: Auto detect IP:yes Primary stun server:blank in sip proxy I selected default and: enabled:yes display name:user username:1234 Aotorisation user:1234 password:1234 Domain/Realm:10.10.10.138 sip proxy:10.10.10.138:5060 use outband proxy:default send internal ip:Always register:default Is it any wrong?this xlite phone is on a pc that ser server is.another one is on another PC and only in username and display and password differs with this one. I am in the back of a NAT but my two clients and server are there. what is so important in setting xlite? thanks. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ________________________________ Cheap Talk? Check out <http://us.rd.yahoo.com/mail_us/taglines/postman8/*http:/us.rd.yahoo.com /evt=39663/*http:/voice.yahoo.com> Yahoo! Messenger's low PC-to-Phone call rates.