[OpenSER-Users] How do I obtain or log the return code in a failure_route[]? - sr-users - kamailio.org

List overview All Threads
Download

[OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

[OpenSER-Users] Openser 1.2.x...

[OpenSER-Users] Openser Signaling...

Juan Carlos Castro y Castro

6 Sep 2007 6 Sep '07

10:04 p.m.

I know I can test the SIP return code with an "if", but how do I log it, or, alternatively, pass it to a exec_dset() script? I tried something like log(1, "Failure Route, status is $status\n"); And I get a "bad logargument" when I start openser. Clues? Juan

Reply

Show replies by date

Bogdan-Andrei Iancu

7 Sep 7 Sep

10 a.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

Hi Juan, see the following pseudo-variable ($T_reply_code): http://www.openser.org/docs/modules/1.2.x/tm.html#AEN546 regards, bogdan Juan Carlos Castro y Castro wrote:

I know I can test the SIP return code with an "if", but how do I log it, or, alternatively, pass it to a exec_dset() script? I tried something like log(1, "Failure Route, status is $status\n"); And I get a "bad logargument" when I start openser. Clues? Juan _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Reply

Victor Gamov

6:28 p.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

Bogdan-Andrei Iancu wrote:

Hi Juan, see the following pseudo-variable ($T_reply_code): http://www.openser.org/docs/modules/1.2.x/tm.html#AEN546

Hi All! What about $rr and $rs Bogdan? I try to use it in failure_route but this variables doesn't contains values in some time. Does I need to use $T_reply_code in failure_route to get properly failure status (timeout for example)?

regards, bogdan Juan Carlos Castro y Castro wrote: > I know I can test the SIP return code with an "if", but how do I log > it, or, alternatively, pass it to a exec_dset() script? I tried > something like

-- CU, Victor Gamov

Reply

Bogdan-Andrei Iancu

7:47 p.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

Hi Victor, $rr and $rs access the current processed reply, so they are useful only in reply route. In failure route you process a request (actually re-process the original request), so you cannot use them. on the other had, the $T_reply_code PV takes info directly from the TM engine (and not from reply message) and it is able to give info about the picked reply code (during parallel forking). regards, bogdan Victor Gamov wrote:

Bogdan-Andrei Iancu wrote:

Hi Juan, see the following pseudo-variable ($T_reply_code): http://www.openser.org/docs/modules/1.2.x/tm.html#AEN546

Hi All! What about $rr and $rs Bogdan? I try to use it in failure_route but this variables doesn't contains values in some time. Does I need to use $T_reply_code in failure_route to get properly failure status (timeout for example)?

regards, bogdan Juan Carlos Castro y Castro wrote: > I know I can test the SIP return code with an "if", but how do I log > it, or, alternatively, pass it to a exec_dset() script? I tried > something like

Reply

Victor Gamov

10:17 p.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

Bogdan-Andrei Iancu wrote:

Hi Victor, $rr and $rs access the current processed reply, so they are useful only in reply route. In failure route you process a request (actually re-process the original request), so you cannot use them. on the other had, the $T_reply_code PV takes info directly from the TM engine (and not from reply message) and it is able to give info about the picked reply code (during parallel forking).

I see. Thanks Bogdan! Can you add this PV description into http://www.openser.org/dokuwiki/doku.php/pseudovariables:1.2.x Thanks again!

Reply

Bogdan-Andrei Iancu

10 Sep 10 Sep

10:10 a.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

ok - done. Regards, Bogdan Victor Gamov wrote:

Bogdan-Andrei Iancu wrote:

Hi Victor, $rr and $rs access the current processed reply, so they are useful only in reply route. In failure route you process a request (actually re-process the original request), so you cannot use them. on the other had, the $T_reply_code PV takes info directly from the TM engine (and not from reply message) and it is able to give info about the picked reply code (during parallel forking).

I see. Thanks Bogdan! Can you add this PV description into http://www.openser.org/dokuwiki/doku.php/pseudovariables:1.2.x Thanks again! _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Reply

Victor Gamov

7 Sep 7 Sep

11:36 p.m.

New subject: [OpenSER-Users] How do I obtain or log the return code in a failure_route[]?

Bogdan-Andrei Iancu wrote:

Hi Victor, $rr and $rs access the current processed reply, so they are useful only in reply route. In failure route you process a request (actually re-process the original request), so you cannot use them. on the other had, the $T_reply_code PV takes info directly from the TM engine (and not from reply message) and it is able to give info about the picked reply code (during parallel forking).

I see. Thanks Bogdan! Can you add this PV description into http://www.openser.org/dokuwiki/doku.php/pseudovariables:1.2.x Thanks again!

Reply

6287

days inactive

6291

days old

sr-users@lists.kamailio.org

Manage subscription

6 comments

4 participants

tags (0)

participants (4)

Bogdan-Andrei Iancu
Juan Carlos Castro y Castro
Victor Gamov
Victor Gamov