Have you tried to use DO= ip-address of ser-server instead of ati.com? I use authentication so I add AUTH-USERNAME=38140299 and AUTH-PASSWD=xxxxxxxx to the "create sip" command. Here is one of my configs:
S SWITCH AGET=NORMAL S SWITCH PORT=WAN IFLT=ON S SWITCH PORT=LAN1 IFLT=ON S SWITCH PORT=LAN2 IFLT=ON S SWITCH PORT=LAN3 IFLT=ON A VLAN=1 PORT=WAN FRAME=TAGGED C VLAN=iptnett VID=5 A VLAN=5 PORT=VOIP A VLAN=5 PORT=WAN FRAME=TAGGED C VLAN=tvnett VID=10 A VLAN=10 PORT=LAN1,LAN3 A VLAN=10 PORT=WAN FRAME=TAGGED SET IP INTERFACE=eth0 CONFIGURATION=DHCP ENABLE TELNET ENABLE NTP SET NTP UTCOFFSET=1 ADD NTP SERVER=10.100.10.31 DEFAULT SET PASSWORD=CIEEHOBB@HHILCHBNADNHA@NGL@B@HIF ENABLE SIP CREATE SIP PORT=0 PHNO=38140299 AUTH-USERNAME=38140299 AUTH-PASSWD=xxxxxxxx DO=ipt-server1.ivisjon.no LS=ipt-server1.ivisjon.no PS=ipt-server1.ivisjon.no CAP=PCMU;PCMA TOS=5 SET PHONE PORT=0 DCALL=VOIP VAD=OFF
I have "ipt-server1.ivisjon.no" in my dns.
Tor.
andyv@sympatico.ca wrote:
The RG's are 213
Here are the *.cfg files
#1 SET IP INTERFACE=eth0 IPADDRESS=192.168.20.3 MASK=255.255.255.0 GATEWAY=192.168.20.1 SET LOADER SERVER=192.168.20.10 ENABLE SIP CREATE SIP PORT=0 PHNO=1001 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 CAP=PCMU;PCMA;G723 TOS=0 SET PHONE PORT=0 DCALL=VOIP
#2 SET IP INTERFACE=eth0 IPADDRESS=192.168.20.2 MASK=255.255.255.0 GATEWAY=192.168.20.1 SET LOADER SERVER=192.168.20.4 SET DOMAIN=ati.com ENABLE SIP CREATE SIP PORT=0 PHNO=1000 DO=ati.com LS=192.168.20.4 PS=192.168.20.4 CAP=PCMU;PCMA;G723 TOS=0 ENABLE TELNET SET PHONE PORT=0 DCALL=VOIP SET PHONE PORT=1 DCALL=VOIP
From: Tor Setane tor.setane@ella.no Date: Mon, 01 Dec 2003 13:19:00 +0100 To: serusers@lists.iptel.org Subject: [Serusers] Re: Residential Gateways
What kind of gateways are you using? 213 or 613? I'm using both without any problems. Please post your rg config..
Tor.
Date: Sun, 30 Nov 2003 19:59:37 -0500 From: "Andy Vander Woude" andyv@sympatico.ca Subject: [Serusers] Residential Gateways To: serusers@lists.iptel.org Message-ID: 000001c3b7a6$68560d70$8adaacce@generator Content-Type: text/plain; charset="us-ascii"
Running Redhat V9 and have installed the SIP Express Router (ser) packages. Have two Allied Telesyn Residential Gateways (192.168.20.2 and 192.168.20.3) and laptop (192.168.20.4) running ser connecting to a managed switch IP address (192.168.20.1 (gateway)) The RG's are configured to access the Proxy server, & Domain server at 192.168.20.4 and the Gateway as 192.168.20.1 The Domain is called ati.com.
When connected all together I get a dial tone on the phones, however when I dial the # configured on the RG's I do not get a ring and they do not register with the ser server. When I type in the "ser start" command I see the alias entries as "127.0.0.1 localhost localdomain localhost" and "192.168.20.4 localhost.ati.com localhost"
The entries in the ser.cfg relating to the localdomain have been changed to ati.com I have added the 192.168.20.4 to the hosts.cfg relating to the ati.com domain.
Any idea as to why this configuration is not working. This is a lab situation with no outside connections. Thank you.
[This E-mail was scanned for viruses by Declude Virus]
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
[This E-mail was scanned for viruses by Declude Virus]
--- [This E-mail was scanned for viruses by Declude Virus]
-
Tor Setane