Hi,
Always CC the list.
then I dont know.. post your full config so people can see if they see something -A
* Tomasz Zieleniewski tzieleniewski@gmail.com [071124 20:38]:
Hi,
I had that parameter set to 0, but still no udp packets...
On Nov 24, 2007 6:43 PM, Atle Samuelsen clona@cyberhouse.no wrote:
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 16:50]:
HI,
I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
But i cant see any udp packets being sent to registered users. Please point me what did I miss.
Hi,
without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets.
- Atle
(shot in the whild world of sip)
Best Tomasz _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
I'm sorry for the CC here is my config:
debug=3 # debug level (cmd line: -dddddddddd) memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes log_stderror=no check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 tls_port_no=5061 children=4 user=ser group=ser mhomed=yes disable_tcp=no tcp_accept_aliases=yes enable_tls=no sip_warning=0 reply_to_via=no alias="voip.touk.pl"
dns_retr_time=1 dns_retr_no=1 dns_servers_no=1 dns_use_search_list=no dns_try_ipv6=no # dns cache & failover use_dns_cache=on use_dns_failover=on # dns_cache_flags=0 dns_cache_negative_ttl=300 dns_cache_min_ttl=60 dns_cache_max_ttl=86400 # 1 day dns_cache_mem=2048 # 2 MB dns_cache_gc_interval=60
tcp_connection_lifetime=3600 tcp_max_connections=2048 tcp_connect_timeout=1
loadmodule ... ....
# specify the path to you database here modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr", "db_url", "mysql://ser:ser@localhost/ser")
# -- usrloc params -- modparam("usrloc", "db_mode", 1)
# -- registrar params -- modparam("registrar", "default_expires", 300) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 300) modparam("registrar", "append_branches", 1) modparam("registrar", "received_param", "rcv") modparam("registrar", "max_contacts", 2)
# -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password")
# -- rr params -- modparam("rr", "enable_full_lr", 1) modparam("rr", "cookie_filter", "uac_nat") modparam("rr", "cookie_secret", "secret") modparam("rr", "user_part_avp", "route_user") modparam("rr", "next_route_avp", "route_next")
# -- gflags params -- modparam("gflags", "load_global_attrs", 1)
# -- domain params -- modparam("domain", "load_domain_attrs", 1)
# -- ctl params -- modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl") modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo") # modparam("ctl", "binrpc", "tcp:localhost:2046") modparam("ctl", "mode", 0777)
# -- tm params -- modparam("tm", "restart_fr_on_each_reply", 1)
# -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15)
# -- options params -- modparam("options", "accept", "*/*") modparam("options", "accept_encoding", "") modparam("options", "accept_language", "en")
# -- ratelimit params -- modparam("ratelimit","timer_interval", 10) modparam("ratelimit","invite_limit", 100) modparam("ratelimit","register_limit", 100) modparam("ratelimit","subscribe_limit", 100)
# -- xmlrpc params -- modparam("xmlrpc", "route","RPC")
# -- nathelper params -- modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
# -- tls params -- modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg") modparam("tls", "tls_force_run", 0) modparam("tls", "tls_log",3) modparam("tls", "handshake_timeout", 10) modparam("tls", "send_timeout", 10) modparam("tls", "tls_disable_compression", 0) #modparam("tls", "private_key", "/etc/certs/key.pem") #modparam("tls", "certificate", "/etc/certs/cert.pem") #modparam("tls", "ca_list", "/etc/certs/ca_list.pem") #modparam("tls", "require_certificate", 0) #modparam("tls", "verify_certificate", 1) #modparam("tls", "tls_method", "TLSv1")
route{ ... }
On Nov 24, 2007 9:35 PM, Atle Samuelsen clona@cyberhouse.no wrote:
Hi,
Always CC the list.
then I dont know.. post your full config so people can see if they see something -A
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 20:38]:
Hi,
I had that parameter set to 0, but still no udp packets...
On Nov 24, 2007 6:43 PM, Atle Samuelsen clona@cyberhouse.no wrote:
- Tomasz Zieleniewski tzieleniewski@gmail.com [071124 16:50]:
HI,
I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1)
But i cant see any udp packets being sent to registered users. Please point me what did I miss.
Hi,
without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets.
- Atle
(shot in the whild world of sip)
Best Tomasz _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers