Hi
is there any way to achive following usecase using carrier route / LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route /LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route /LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
but above guide is only prefix priority and weight based , but we should involve rate as well. ,
On Sun, Aug 9, 2015 at 3:09 PM, Alexandru Covalschi 568691@gmail.com wrote:
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route /LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I know CGRateS allow cost-based LCR for Kamailio. Maybe there are some internal Kamailio modules, but I don't know about them
2015-08-09 17:10 GMT+03:00 Arun Kumar mi2arun@gmail.com:
but above guide is only prefix priority and weight based , but we should involve rate as well. ,
On Sun, Aug 9, 2015 at 3:09 PM, Alexandru Covalschi 568691@gmail.com wrote:
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route /LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
however you can try building LCR based on prefix and weight, why not?
2015-08-09 18:52 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
I know CGRateS allow cost-based LCR for Kamailio. Maybe there are some internal Kamailio modules, but I don't know about them
2015-08-09 17:10 GMT+03:00 Arun Kumar mi2arun@gmail.com:
but above guide is only prefix priority and weight based , but we should involve rate as well. ,
On Sun, Aug 9, 2015 at 3:09 PM, Alexandru Covalschi 568691@gmail.com wrote:
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route/ LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
hi Alexandru
so we have manually set prefix , weight and priority depanding upon rates ? is there any avaliable way to automate or we have to rewrite/modify the lcr/drouting module for rate selection ,
On Sun, Aug 9, 2015 at 9:22 PM, Alexandru Covalschi 568691@gmail.com wrote:
however you can try building LCR based on prefix and weight, why not?
2015-08-09 18:52 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
I know CGRateS allow cost-based LCR for Kamailio. Maybe there are some internal Kamailio modules, but I don't know about them
2015-08-09 17:10 GMT+03:00 Arun Kumar mi2arun@gmail.com:
but above guide is only prefix priority and weight based , but we should involve rate as well. ,
On Sun, Aug 9, 2015 at 3:09 PM, Alexandru Covalschi 568691@gmail.com wrote:
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
Hi
is there any way to achive following usecase using carrier route/ LCR / droude module
i have 10 different termination gateways, each gateways will have more than 10000 destinations and each gateways will have different rate, for example
91 Destination ( there will be 10000 entries like 91 ) gw1 gw2 gw3 gw4 gw5 0.001 0.007 0.003 0.002 0.003
now need to logic to load the these destination with cost and sort gateways in order of longest match of dialled number,cost, priority for the dialled destination, which will not use too much CPU and memory
Regards Arun
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
you already have cost, just write a script to transform it into weight, I don't see a hard task here. It can be easily automated
2015-08-09 21:15 GMT+03:00 Arun Kumar mi2arun@gmail.com:
hi Alexandru
so we have manually set prefix , weight and prioritydepanding upon rates ? is there any avaliable way to automate or we have to rewrite/modify the lcr/drouting module for rate selection ,
On Sun, Aug 9, 2015 at 9:22 PM, Alexandru Covalschi 568691@gmail.com wrote:
however you can try building LCR based on prefix and weight, why not?
2015-08-09 18:52 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
I know CGRateS allow cost-based LCR for Kamailio. Maybe there are some internal Kamailio modules, but I don't know about them
2015-08-09 17:10 GMT+03:00 Arun Kumar mi2arun@gmail.com:
but above guide is only prefix priority and weight based , but we should involve rate as well. ,
On Sun, Aug 9, 2015 at 3:09 PM, Alexandru Covalschi 568691@gmail.com wrote:
Or, well, see that guide http://dopensource.com/least-cost-routing-with-kamailio-v4-1/ - we have priority and weight on LCR module
2015-08-09 12:37 GMT+03:00 Alexandru Covalschi 568691@gmail.com:
try using CGRateS
2015-08-09 12:06 GMT+03:00 Arun Kumar mi2arun@gmail.com:
> Hi > > is there any way to achive following usecase using carrier > route / LCR / droude module > > i have 10 different termination gateways, each gateways will have > more than 10000 destinations and each gateways will have different rate, > for example > > 91 Destination ( there will be 10000 entries like 91 ) > gw1 gw2 gw3 gw4 gw5 > 0.001 0.007 0.003 0.002 0.003 > > now need to logic to load the these destination with cost and sort > gateways in order of longest match of dialled number,cost, priority for the > dialled destination, which will not use too much CPU and memory > > Regards > Arun > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
-- Alexandru Covalschi ABRISS-Solutions VoIP engineer and system administrator phone: +37367398493 web: http://abs-telecom.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Long story short: Kamailio supports primitive weight-based routing with its various internal modules, but not complex, jurisdiction and market-specific business logic which we commonly think of as LCR.
For that, you need to somehow shoehorn your right selection algorithm into these modules' limited schema, write your own logic, or licence a commercial product which provides this, such as Sipwise's sip-provider (www.sipwise.com), or ours (www.csrpswitch.com), or various others.
-- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States
Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
Sent from my BlackBerry. Original Message From: Alexandru Covalschi Sent: Sunday, August 9, 2015 11:52 To: Kamailio (SER) - Users Mailing List Reply To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] LCR Routing - Cost based routing
-
Alex Balashov -
Alexandru Covalschi -
Arun Kumar -
Juha Heinanen