Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
Avast logo https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla miconda@gmail.com Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org; Igor Potjevlesh igor.potjevlesch@gmail.com; sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Think this will fork if command executed: 1) root user; 2) kamailio user; 3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh igor.potjevlesch@gmail.com wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
*De :* Daniel-Constantin Mierla miconda@gmail.com *Envoyé :* jeudi 30 juillet 2020 11:16 *À :* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org; Igor Potjevlesh igor.potjevlesch@gmail.com; sr-users@lists.sip-router.org *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
[image: Avast logo] https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users sr-users-bounces@lists.kamailio.org De la part de Sergey Safarov Envoyé : jeudi 30 juillet 2020 12:46 À : Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com >; sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
*De :* sr-users sr-users-bounces@lists.kamailio.org *De la part de* Sergey Safarov *Envoyé :* jeudi 30 juillet 2020 12:46 *À :* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
root user;
kamailio user;
member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com> wrote:
Hello Daniel, I installed from the sources. But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you. Regards, Igor. *De :* Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> *Envoyé :* jeudi 30 juillet 2020 11:16 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>>; sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Hello, did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case. Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands. The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file. Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl... Cheers, Daniel On 30.07.20 10:47, Igor Potjevlesh wrote: Hello there! I'm having trouble with kamctl since I upgraded to 5.3.4. The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists. I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs. How can I fix that? Regards, Igor. ------------------------------------------------------------------------ Avast logo <https://www.avast.com/antivirus> L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com <https://www.avast.com/antivirus> _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com> www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Funding: https://www.paypal.me/dcmierla _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla miconda@gmail.com Envoyé : jeudi 30 juillet 2020 14:55 À : Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org; Igor Potjevlesh igor.potjevlesch@gmail.com Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users mailto:sr-users-bounces@lists.kamailio.org sr-users-bounces@lists.kamailio.org De la part de Sergey Safarov Envoyé : jeudi 30 juillet 2020 12:46 À : Kamailio (SER) - Users Mailing List mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com >; sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678@hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343@kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh igor.potjevlesch@gmail.com Envoyé : jeudi 30 juillet 2020 14:56 À : miconda@gmail.com; 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 14:55 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users mailto:sr-users-bounces@lists.kamailio.org sr-users-bounces@lists.kamailio.org De la part de Sergey Safarov Envoyé : jeudi 30 juillet 2020 12:46 À : Kamailio (SER) - Users Mailing List mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com >; sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
From 4.3 to 5.3 is quite some jump, hard to remember what could be the
relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is executed.
Cheers, Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678@hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343@kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
*De :* Igor Potjevlesh igor.potjevlesch@gmail.com *Envoyé :* jeudi 30 juillet 2020 14:56 *À :* miconda@gmail.com; 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org *Objet :* RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
*De :* Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> *Envoyé :* jeudi 30 juillet 2020 14:55 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org>; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay. The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual. Regards, Igor. *De :* sr-users <sr-users-bounces@lists.kamailio.org> <mailto:sr-users-bounces@lists.kamailio.org> *De la part de* Sergey Safarov *Envoyé :* jeudi 30 juillet 2020 12:46 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Think this will fork if command executed: 1) root user; 2) kamailio user; 3) member of kamailio group user; According to description command executed not under these users. On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>> wrote: Hello Daniel, I installed from the sources. But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you. Regards, Igor. *De :* Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> *Envoyé :* jeudi 30 juillet 2020 11:16 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>>; sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Hello, did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case. Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands. The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file. Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl... Cheers, Daniel On 30.07.20 10:47, Igor Potjevlesh wrote: Hello there! I'm having trouble with kamctl since I upgraded to 5.3.4. The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists. I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs. How can I fix that? Regards, Igor. ------------------------------------------------------------------------ Avast logo <https://www.avast.com/antivirus> L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com <https://www.avast.com/antivirus> _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com> www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Funding: https://www.paypal.me/dcmierla _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla -- www.asipto.com http://www.asipto.com www.twitter.com/miconda http://www.twitter.com/miconda -- www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988 a=25 n=lookup -> which is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and it's working.
Regards,
Igor.
De : Daniel-Constantin Mierla miconda@gmail.com Envoyé : jeudi 30 juillet 2020 18:11 À : Igor Potjevlesh igor.potjevlesch@gmail.com; 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember what could be the relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is executed.
Cheers, Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678@hostname.local mailto:012345678@hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343@kamailio.rpc mailto:dfjrewr12386fd6-343@kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh mailto:igor.potjevlesch@gmail.com igor.potjevlesch@gmail.com Envoyé : jeudi 30 juillet 2020 14:56 À : miconda@gmail.com mailto:miconda@gmail.com ; 'Kamailio (SER) - Users Mailing List' mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 14:55 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users mailto:sr-users-bounces@lists.kamailio.org sr-users-bounces@lists.kamailio.org De la part de Sergey Safarov Envoyé : jeudi 30 juillet 2020 12:46 À : Kamailio (SER) - Users Mailing List mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com >; sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
The logs indicated that the sip request type is not advertised as supported by the contact.
You should upgrade to latest 5.3.x version, iirc there was a commit fixing the read of methods fields from the rpc command, or just set:
modparam("registrar", "method_filtering", 0)
in kamailio.cfg
Cheers, Daniel
On 30.07.20 19:01, Igor Potjevlesh wrote:
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988 a=25 n=lookup -> which is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and it's working.
Regards,
Igor.
*De :*Daniel-Constantin Mierla miconda@gmail.com *Envoyé :* jeudi 30 juillet 2020 18:11 *À :* Igor Potjevlesh igor.potjevlesch@gmail.com; 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember what could be the relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is executed.
Cheers, Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present: kamcmd> ul.lookup aliases 012345678@hostname.local <mailto:012345678@hostname.local> { AoR: 0762350002 Contacts: { Contact: { Address: sip:012345678@host_1.local Expires: permanent Q: 0.000000 Call-ID: dfjrewr12386fd6-343@kamailio.rpc <mailto:dfjrewr12386fd6-343@kamailio.rpc> CSeq: 1 User-Agent: kamailio SIP Router - RPC Server Received: [not set] Path: [not set] State: CS_SYNC Flags: 0 CFlags: 0 Socket: [not set] Methods: -2147483648 Ruid: ulcx-5f22a37b-654b-1 Instance: [not set] Reg-Id: 0 Server-Id: 0 Tcpconn-Id: 0 Keepalive: 0 Last-Keepalive: 0 Last-Modified: 0 } } } kamcmd> *De :* Igor Potjevlesh <igor.potjevlesch@gmail.com> <mailto:igor.potjevlesch@gmail.com> *Envoyé :* jeudi 30 juillet 2020 14:56 *À :* miconda@gmail.com <mailto:miconda@gmail.com>; 'Kamailio (SER) - Users Mailing List' <sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org> *Objet :* RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Hello, I upgraded from 4.4.3. Regards, Igor. *De :* Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> *Envoyé :* jeudi 30 juillet 2020 14:55 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Hello, if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older? Cheers, Daniel On 30.07.20 14:43, Igor Potjevlesh wrote: With the right permissions now it's okay. The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual. Regards, Igor. *De :* sr-users <sr-users-bounces@lists.kamailio.org> <mailto:sr-users-bounces@lists.kamailio.org> *De la part de* Sergey Safarov *Envoyé :* jeudi 30 juillet 2020 12:46 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org> <mailto:sr-users@lists.kamailio.org> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Think this will fork if command executed: 1) root user; 2) kamailio user; 3) member of kamailio group user; According to description command executed not under these users. On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>> wrote: Hello Daniel, I installed from the sources. But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you. Regards, Igor. *De :* Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> *Envoyé :* jeudi 30 juillet 2020 11:16 *À :* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>; Igor Potjevlesh <igor.potjevlesch@gmail.com <mailto:igor.potjevlesch@gmail.com>>; sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> *Objet :* Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4 Hello, did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case. Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands. The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file. Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl... Cheers, Daniel On 30.07.20 10:47, Igor Potjevlesh wrote: Hello there! I'm having trouble with kamctl since I upgraded to 5.3.4. The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists. I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs. How can I fix that? Regards, Igor. ------------------------------------------------------------------------ Avast logo <https://www.avast.com/antivirus> L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com <https://www.avast.com/antivirus> _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com> www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Funding: https://www.paypal.me/dcmierla _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com> www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda> Funding: https://www.paypal.me/dcmierla-- Daniel-Constantin Mierla -- www.asipto.com http://www.asipto.com www.twitter.com/miconda http://www.twitter.com/miconda -- www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla
Set the method_filtering to 0 works fine. Thank you Daniel! Have a nice day.
Regards,
Igor.
De : Daniel-Constantin Mierla miconda@gmail.com Envoyé : jeudi 30 juillet 2020 20:40 À : Igor Potjevlesh igor.potjevlesch@gmail.com; 'Kamailio (SER) - Users Mailing List' sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
The logs indicated that the sip request type is not advertised as supported by the contact.
You should upgrade to latest 5.3.x version, iirc there was a commit fixing the read of methods fields from the rpc command, or just set:
modparam("registrar", "method_filtering", 0)
in kamailio.cfg
Cheers, Daniel
On 30.07.20 19:01, Igor Potjevlesh wrote:
The most relevant logs are:
ERROR: *** cfgtrace:request_route=[INVITE] c=[/usr/local/etc/kamailio/kamailio.cfg] l=988 a=25 n=lookup -> which is the line where I do lookup("aliases")
DEBUG: registrar [lookup.c:313]: lookup_helper(): contact for [0123456789] cannot handle the SIP method
DEBUG: registrar [lookup.c:321]: lookup_helper(): '0123456789' has no valid contact in usrloc
So a record is found.
And if I restart Kamailio, alias is retrieve from db at startup and it's working.
Regards,
Igor.
De : Daniel-Constantin Mierla mailto:miconda@gmail.com miconda@gmail.com Envoyé : jeudi 30 juillet 2020 18:11 À : Igor Potjevlesh mailto:igor.potjevlesch@gmail.com igor.potjevlesch@gmail.com; 'Kamailio (SER) - Users Mailing List' mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
From 4.3 to 5.3 is quite some jump, hard to remember what could be the relevant changes for alias lookup.
But if you see the record present in the rpc command, then lookup should work. Run with debug=3 in kamailio.cfg and see the debug messages when lookup("aliases") is executed.
Cheers, Daniel
On 30.07.20 15:07, Igor Potjevlesh wrote:
From the kamcmd ul.lookup tool aliaa seems to be present:
kamcmd> ul.lookup aliases 012345678@hostname.local mailto:012345678@hostname.local
{
AoR: 0762350002
Contacts: {
Contact: {
Address: sip:012345678@host_1.local
Expires: permanent
Q: 0.000000
Call-ID: dfjrewr12386fd6-343@kamailio.rpc mailto:dfjrewr12386fd6-343@kamailio.rpc
CSeq: 1
User-Agent: kamailio SIP Router - RPC Server
Received: [not set]
Path: [not set]
State: CS_SYNC
Flags: 0
CFlags: 0
Socket: [not set]
Methods: -2147483648
Ruid: ulcx-5f22a37b-654b-1
Instance: [not set]
Reg-Id: 0
Server-Id: 0
Tcpconn-Id: 0
Keepalive: 0
Last-Keepalive: 0
Last-Modified: 0
}
}
}
kamcmd>
De : Igor Potjevlesh mailto:igor.potjevlesch@gmail.com igor.potjevlesch@gmail.com Envoyé : jeudi 30 juillet 2020 14:56 À : miconda@gmail.com mailto:miconda@gmail.com ; 'Kamailio (SER) - Users Mailing List' mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : RE: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
I upgraded from 4.4.3.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 14:55 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
if you upgraded in the 5.3 series, then it should be no updates in the usrloc module that should change functionality. Or did you upgraded from an older series like 5.2 or even older?
Cheers, Daniel
On 30.07.20 14:43, Igor Potjevlesh wrote:
With the right permissions now it's okay.
The new aliases are created and then sync with the DB but the lookup(aliases) function doesn't find any record. Is there something new with this module? The one loaded at the startup looks to be good and run as usual.
Regards,
Igor.
De : sr-users mailto:sr-users-bounces@lists.kamailio.org sr-users-bounces@lists.kamailio.org De la part de Sergey Safarov Envoyé : jeudi 30 juillet 2020 12:46 À : Kamailio (SER) - Users Mailing List mailto:sr-users@lists.kamailio.org sr-users@lists.kamailio.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Think this will fork if command executed:
1) root user;
2) kamailio user;
3) member of kamailio group user;
According to description command executed not under these users.
On Thu, Jul 30, 2020 at 1:35 PM Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com > wrote:
Hello Daniel,
I installed from the sources.
But you're right. I missed the "fifo_mode" param with the right permission. It works better, thank you.
Regards,
Igor.
De : Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com > Envoyé : jeudi 30 juillet 2020 11:16 À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org >; Igor Potjevlesh <igor.potjevlesch@gmail.com mailto:igor.potjevlesch@gmail.com >; sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org Objet : Re: [SR-Users] Issue with kamctl after upgrading to 5.3.4
Hello,
did you install from packages on an OS with systemd? I think I saw some discussion here on mailing list related to restriction/permissions enforced by systemd, but I am not sure it was about the same case.
Anyhow, jsonrpcs also uses a fifo file to receive commands from kamctl and kamailio_rpc.fifo is the one create in such case. The mi_fifo is no longer available, which was for MI commands, not for RPC commands.
The jsonrpcs module should have modparams to set access rights as well as user/group for the rpc fifo file. That should give enough flexibility to allow different users to access the fifo file.
Otherwise, I am not sure why it worked for you before, because it was supposed to be restricted access and as long as I can remember I used sudo to run kamctl...
Cheers, Daniel
On 30.07.20 10:47, Igor Potjevlesh wrote:
Hello there!
I'm having trouble with kamctl since I upgraded to 5.3.4.
The command is working fine with root user but not with another user. The problem seems to be that the command try to access to /var/run/kamailio/kamailio_rpc.fifo even if the file exists.
I guess it's a permission problem. But I was thinking that FIFO is no more used. Only jsonrpcs.
How can I fix that?
Regards,
Igor.
_____
https://www.avast.com/antivirus
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. www.avast.com https://www.avast.com/antivirus
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Igor Potjevlesh -
Sergey Safarov