Hello Jan,
I have solved the problems I was experiencing, basically I have started the
installation and configuration from scratch.
In the mean time I am expericing some problems the radius accounting.
I am receiving the stop acc packet as described in
, however I would like to receive the
Acct-Session-Time in my stop packet.
Is this possible ? I have installed radiusclient-0.3.2-0.rhel2.1.dag.
Thank you,
Regards,
Wilhelm
From: Jan Janak <jan(a)iptel.org>
To: William Farrgon<wgfarr(a)hotmail.com>
CC: serusers(a)lists.iptel.org
Subject: Re: [Serusers] Radius ser.cfg
Date: Mon, 12 Apr 2004 22:25:11 +0200
The problem is on line 66 of the configuration file. Try to replace
if (len_gt(max_len))
with
if (msg:len > max_len)
Note the following line in ser output:
parse error (66,21-28): syntax error
It tells you that the error is on line 66, columns 21-28.
Jan.
On 12-04 08:33, Wilhelm Farrugia wrote:
> Hello,
>
> I am trying to install ser with radius support and i have followed the
> instructions on:
>
>
http://iptel.org/ser/ser_radius.html
>
> and this is my ser.cfg.
>
>
> #
> # ----------- global configuration parameters ------------------------
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> #/* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> #*/
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 2)
> modparam("auth_radius",
>
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc", "log_level", 1)
> #modparam("acc", "radius_flag", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
>
> if (method=="REGISTER") {
>
> log(1, "REGISTER: Authenticating user\n");
>
> if (!radius_www_authorize("")) {
> log(1, "REGISTER: challenging user\n");
> www_challenge("", "0");
> break;
> };
> save("location");
> break;
> };
>
>
> if (method=="INVITE") {
>
> log(1, "INVITE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="MESSAGE") {
> log(1, "MESSAGE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="BYE" || method=="CANCEL") {
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
>
>
> }
>
>
>
> however when I start the ser server I receive this logging:
>
> 0(959) loading module /usr/lib/ser/modules/mysql.so
> 0(959) loading module /usr/local/lib/ser/modules/sl.so
> 0(959) loading module /usr/local/lib/ser/modules/tm.so
> 0(959) loading module /usr/local/lib/ser/modules/rr.so
> 0(959) loading module /usr/local/lib/ser/modules/maxfwd.so
> 0(959) loading module /usr/local/lib/ser/modules/usrloc.so
> 0(959) loading module /usr/local/lib/ser/modules/registrar.so
> 0(959) loading module /usr/local/lib/ser/modules/auth.so
> 0(959) loading module /usr/local/lib/ser/modules/acc.so
> 0(959) loading module /usr/local/lib/ser/modules/auth_radius.so
> 0(959) loading module /usr/local/lib/ser/modules/uri_radius.so
> 0(959) set_mod_param_regex: usrloc matches module usrloc
> 0(959) set_mod_param_regex: found <db_mode> in module usrloc
> [/usr/local/lib/ser/modules/usrloc.so]
> 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> 0(959) set_mod_param_regex: found <radius_config> in module auth_radius
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> 0(959) set_mod_param_regex: found <service_type> in module auth_radius
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) set_mod_param_regex: rr matches module rr
> 0(959) set_mod_param_regex: found <enable_full_lr> in module rr
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) set_mod_param_regex: acc matches module acc
> 0(959) set_mod_param_regex: found <log_level> in module acc
> [/usr/local/lib/ser/modules/acc.so]
> 0(959) find_export: found <mf_process_maxfwd_header> in module
> maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so]
> 0(959) find_export: found <sl_send_reply> in module sl_module
> [/usr/local/lib/ser/modules/sl.so]
> 0(959) parse error (66,21-28): syntax error
> 0(959) parse error (66,29-30): bad arguments
> 0(959) find_export: found <sl_send_reply> in module sl_module
> [/usr/local/lib/ser/modules/sl.so]
> 0(959) find_export: found <record_route> in module rr
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) find_export: found <loose_route> in module rr
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) find_export: found <t_relay> in module tm
> [/usr/local/lib/ser/modules/tm.so]
> 0(959) find_export: found <radius_www_authorize> in module auth_radius
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) find_export: found <www_challenge> in module auth
> [/usr/local/lib/ser/modules/auth.so]
> 0(959) find_export: found <save> in module registrar
> [/usr/local/lib/ser/modules/registrar.so]
> ERROR: bad config file (2 errors)
> 0(959) DEBUG: tm_shutdown : start
> 0(959) DEBUG: tm_shutdown : empting hash table
> 0(959) DEBUG: tm_shutdown: releasing timers
> 0(959) DEBUG: tm_shutdown : removing semaphores
> 0(959) DEBUG: tm_shutdown : done
> 0(959) shm_mem_destroy
> 0(959) destroying the shared memory lock
>
> Is there a good ser.cfg file available ?
>
> Thank you,
> Regards,
>
> Wgfarr
>
> _________________________________________________________________
> Protect your PC - get
McAfee.com VirusScan Online
>
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
>
http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today!