22 Mar
2007
22 Mar
'07
10:58 p.m.
Hi,
When migrating my config from 1.1 to 1.2, far-end NAT traversal doesn't
work anymore. Here is what I do:
modparam("usrloc", "nat_bflag", 6)
...
# register handling:
if(!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
xlog("L_INFO", "NATed REGISTER\n");
fix_nated_register();
setbflag(6);
}
if(!save("location"))
{
# error handling
...
}
The log message is printed, so NAT is detected. The received-column in
the DB also shows the correct NAT-address, but the flag-column is always
0. Any advice?
Regards,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH; Registered
Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at the
Commercial Court of Vienna
23 Mar
23 Mar
11:43 a.m.
Hi Andreas,
Did you set the received_avp in the NATHelper-/Registrar-Module? It is
no longer set per default like in the 1.1-Versions:
"Note:
You must set this parameter if you use "fix_nated_register". In such
case you must set the parameter with same name of "registrar" module to
same value."
http://openser.org/docs/modules/1.2.x/nathelper.html#AEN119
Carsten
Am Donnerstag, den 22.03.2007, 21:58 +0100 schrieb Andreas Granig:
Hi,
When migrating my config from 1.1 to 1.2, far-end NAT traversal doesn't
work anymore. Here is what I do:
modparam("usrloc", "nat_bflag", 6)
...
# register handling:
if(!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
xlog("L_INFO", "NATed REGISTER\n");
fix_nated_register();
setbflag(6);
}
if(!save("location"))
{
# error handling
...
}
The log message is printed, so NAT is detected. The received-column in
the DB also shows the correct NAT-address, but the flag-column is always
0. Any advice?
Regards,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH;
Registered Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at
the Commercial Court of Vienna
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11:47 a.m.
Hi Carsten,
I do set that parameters (otherwise openser complains at startup, IIRC).
modparam("registrar", "received_avp", "$avp(i:801)")
modparam("nathelper", "received_avp", "$avp(i:801)")
Andreas
Carsten Bock wrote:
Hi Andreas,
Did you set the received_avp in the NATHelper-/Registrar-Module? It is
no longer set per default like in the 1.1-Versions:
"Note:
You must set this parameter if you use "fix_nated_register". In such
case you must set the parameter with same name of "registrar" module to
same value."
http://openser.org/docs/modules/1.2.x/nathelper.html#AEN119
Carsten
Am Donnerstag, den 22.03.2007, 21:58 +0100 schrieb Andreas Granig:
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH; Registered
Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at the
Commercial Court of Vienna
Hi,
When migrating my config from 1.1 to 1.2, far-end NAT traversal doesn't
work anymore. Here is what I do:
modparam("usrloc", "nat_bflag", 6)
...
# register handling:
if(!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
xlog("L_INFO", "NATed REGISTER\n");
fix_nated_register();
setbflag(6);
}
if(!save("location"))
{
# error handling
...
}
The log message is printed, so NAT is detected. The received-column in
the DB also shows the correct NAT-address, but the flag-column is always
0. Any advice?
Regards,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH;
Registered Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at
the Commercial Court of Vienna
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
8:33 p.m.
After digging a little, it turns out that it's not the the flags column
anymore, but the cflags column. And - surprise - it now works, although
I haven't changed anything. Maybe my phones have gone crazy a little
bit. No idea, what the reason could have been.
Andreas
Andreas Granig wrote:
Hi Carsten,
I do set that parameters (otherwise openser complains at startup, IIRC).
modparam("registrar", "received_avp", "$avp(i:801)")
modparam("nathelper", "received_avp", "$avp(i:801)")
Andreas
Carsten Bock wrote:
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH; Registered
Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at the
Commercial Court of Vienna
Hi Andreas,
Did you set the received_avp in the NATHelper-/Registrar-Module? It is
no longer set per default like in the 1.1-Versions:
"Note:
You must set this parameter if you use "fix_nated_register". In such
case you must set the parameter with same name of "registrar" module to
same value."
http://openser.org/docs/modules/1.2.x/nathelper.html#AEN119
Carsten
Am Donnerstag, den 22.03.2007, 21:58 +0100 schrieb Andreas Granig:
This e-mail is confidential and may well also be legally privileged. If
you have received it in error, you are on notice of its status. Please
notify us immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or
disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC
Austria GmbH; Registered Office: Wolfganggasse 58-60, 1120 Vienna
Company Register Number: FN 189858d at the Commercial Court of Vienna
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users Hi,
When migrating my config from 1.1 to 1.2, far-end NAT traversal
doesn't work anymore. Here is what I do:
modparam("usrloc", "nat_bflag", 6)
...
# register handling:
if(!search("^Contact:[ ]*\*") && nat_uac_test("19"))
{
xlog("L_INFO", "NATed REGISTER\n");
fix_nated_register();
setbflag(6);
}
if(!save("location"))
{
# error handling
...
}
The log message is printed, so NAT is detected. The received-column
in the DB also shows the correct NAT-address, but the flag-column is
always 0. Any advice?
Regards,
Andreas
This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this
message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so
could be a breach of confidence. Thank you for your cooperation.
Information pursuant to paragraph 14 Austrian Companies Code: UPC
Austria GmbH; Registered Office: Wolfganggasse 58-60, 1120 Vienna
Company Register Number: FN 189858d at the Commercial Court of Vienna
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6455
days inactive
6456
days old
3 comments
2 participants
participants (2)
-
Andreas Granig -
Carsten Bock