New subject: [Serusers] error loading acc module

17 Mar 2004

sorry I don't understand what are you pointing me to...

...
 From that document I figured out, that function
t_relay_to not longer exist in tm module. But I have problems with function
t_relay_to_tcp.
That function should be in tm. Is it correct? 
Why than I'm getting error message "tm_bind: TM module function
't_relay_to_tcp' not found"??

When I comment out line loadmodule "/usr/local/lib/ser/modules/acc.so"
in my config, ser starts without complaining. I think that acc module is
using t_relay_to_tcp, but from some reason it isn't found in tm.

Thanks.

Roman Mikus

...
  -----Original Message-----
 From: Jiri Kuthan [mailto:jiri@iptel.org]
 Sent: Wednesday, March 17, 2004 2:22 PM
 To: Roman Mikus; serusers(a)lists.iptel.org
 Subject: Re: [Serusers] error loading acc module

 see http://lists.iptel.org/pipermail/serusers/2004-March/006655.html

 -jiri

 At 10:02 AM 3/17/2004, Roman Mikus wrote:

 >Hi,
 >
 >I'm running ser-0.8.12 on FreeBSD 4.9-RELEASE-p1. It was installed from
...
  ports collection. Simple configuration works fine,
until I try to load acc
...
  module. Then I get following error message and ser
server doesn't start.
...

Mar 16 12:54:33 sirena /usr/local/sbin/ser[75391]: ERROR: tm_bind: TM  module
function 't_relay_to_tcp' not found
 Mar 16 12:54:33 sirena /usr/local/sbin/ser[75391]:
init_mod(): Error  while initializing module acc
 >
 >My ser config file is atached on the end.
 >
 >Can anybody help me with this? Thanks a lot.
 >
 >Roman Mikus
 >mail to: roman(a)zutom.sk
 >
 >#
 ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
 >#
 ># simple quick-start config script
 >#
 >
 ># ----------- global configuration parameters ------------------------
...
  >
 >#debug=3         # debug level (cmd line: -dddddddddd)
 >#fork=yes
 >#log_stderror=no        # (cmd line: -E)
 >
 >/* Uncomment these lines to enter debugging mode
 >debug=7
 >fork=no
 >log_stderror=yes
 >*/
 >
 >check_via=no    # (cmd. line: -v)
 >dns=no           # (cmd. line: -r)
 >rev_dns=no      # (cmd. line: -R)
 >#port=5060
 >#children=4
 >fifo="/tmp/ser_fifo"
 >
 ># ------------------ module loading ----------------------------------
...
  >
 ># Uncomment this if you want to use SQL database
 >loadmodule "/usr/local/lib/ser/modules/mysql.so"
 >
 >loadmodule "/usr/local/lib/ser/modules/tm.so"
 >loadmodule "/usr/local/lib/ser/modules/acc.so"
 >loadmodule "/usr/local/lib/ser/modules/sl.so"
 >loadmodule "/usr/local/lib/ser/modules/rr.so"
 >loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
 >loadmodule "/usr/local/lib/ser/modules/usrloc.so"
 >loadmodule "/usr/local/lib/ser/modules/registrar.so"
 >
 ># Uncomment this if you want digest authentication
 ># mysql.so must be loaded !
 >loadmodule "/usr/local/lib/ser/modules/auth.so"
 >loadmodule "/usr/local/lib/ser/modules/auth_db.so"
 >
 ># ----------------- setting module-specific parameters ---------------
...

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this 
config),
 ># uncomment also the following parameter)
 >#
 >modparam("auth_db", "password_column", "password")
 >
 ># -- rr params --
 ># add value to ;lr param to make some broken UAs happy
 >modparam("rr", "enable_full_lr", 1)
 >
 >modparam("auth_db", "db_url",
"sql://serro:heslo@localhost/ser")
 >modparam("usrloc", "db_url",
"sql://ser:heslo@localhost/ser")
 >
 ># accounting
 >#modparam("acc", "log_level", 1)
 >#modparam("acc", "log_flag", 1 )
 >
 >
 ># -------------------------  request routing logic -------------------
...
  >
 ># main routing logic
 >
 >route{
 >
 >        # initial sanity checks -- messages with
 >        # max_forwards==0, or excessively long requests
 >        if (!mf_process_maxfwd_header("10")) {
 >                sl_send_reply("483","Too Many Hops");
 >                break;
 >        };
 >        if ( msg:len > max_len ) {
 >                sl_send_reply("513", "Message too big");
 >                break;
 >        };
 >
 >        # we record-route all messages -- to make sure that
 >        # subsequent messages will go through our proxy; that's
 >        # particularly good if upstream and downstream entities
 >        # use different transport protocol
 >        record_route();
 >        # loose-route processing
 >        if (loose_route()) {
 >                t_relay();
 >                break;
 >        };
 >
 >
 >        ############# kvoli accountingu
 >        # labeled all transaction for accounting
 >        #setflag(1);
 >        # record-route INVITES to make sure BYEs will visit our server
...
  too
 >        #if (method=="INVITE") record_route();
 >        #####################################
 >
 >        # if the request is for other domain use UsrLoc
 >        # (in case, it does not work, use the following command
 >        # with proper names and addresses in it)
 >        ##if (uri==myself) {
 >        if (uri=~"zutom.sk") {
 >
 >                if (method=="REGISTER") {
 >
 >        # Uncomment this if you want to use digest authentication
 >                        if (!www_authorize("zutom.sk",
"subscriber")) {
...
  >                               
www_challenge("zutom.sk", "0");
 >                                break;
 >                        };
 >
 >                        save("location");
 >                        lookup("aliases");
 >                        break;
 >                };
 >
 >                # native SIP destinations are handled using our USRLOC DB
...

if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };

}

_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers  
 --
 Jiri Kuthan            http://iptel.org/~jiri/ 

RE: [Serusers] error loading acc module