Don't forget to keep the mailing list cc-ed -- private emails sent from mailing lists discussion are going to be discarded.
If you have libsctp devel package installed, try compilation with:
make SCTP=1 ... all
Cheers, Daniel
On 11/18/11 12:13 PM, Stefan Ljung wrote:
So, its not.
[test032@wslint90]# ./ser -V
version: ser 3.1.2 (i386/linux) 2fe4d6
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 2fe4d6
compiled on 11:31:57 Nov 18 2011 with gcc 4.1.2
This result came after an untar and then make command.
Here's my machine :
[linux]# uname -a
Linux wslint90 2.6.23.1-21.fc7 #1 SMP Thu Nov 1 21:09:24 EDT 2007 i686 i686 i386 GNU/Linux
What can I do to force it in ?
/Stefan
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com] *Sent:* den 18 november 2011 11:59 *To:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List *Cc:* Stefan Ljung *Subject:* Re: [SR-Users] Core compiled with Sctp support
Hello,
when sctp support is available, if you do 'kamailio -V' or 'ser -V' you should see USE_SCTP flag there.
Not sure if sctp is enabled by default in listen sockets, you can do it anyhow with global parameter:
enable_sctp=yes
Cheers, Daniel
On 11/18/11 11:49 AM, Stefan Ljung wrote:
I've downloaded sip-router 3.1.2 and have been struggling with the make commands for configuring. Compiling and installing. Can't really say that I master it. But I have finally managed to do all steps and started a example ser.cfg. One of the features I want to play around eith is the sctp transport. From previous experiments with OpenSER I kearned that if I only specify a listen host address without transport protocol all three UDP TCP and SCTP sockets will be started. Ths time I only see UDP and TCP: Listening on udp: 127.0.0.1:5060 tcp: 127.0.0.1:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060 I have read the c sources to verify that the sctp libs and header files are in the right places, and they are. What I could need is a tip on how to verify that my core has been compiled with sctp support. How can I see that ? In what files would there be a confimation of that the sctp feature will be compiled in? /Stefan
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
YES ! Its up. SCTP=1 did the difference Many thanks
/Stefan
________________________________ From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: den 18 november 2011 12:53 To: Stefan Ljung; kamailio users Subject: Re: [SR-Users] Core compiled with Sctp support
Don't forget to keep the mailing list cc-ed -- private emails sent from mailing lists discussion are going to be discarded.
If you have libsctp devel package installed, try compilation with:
make SCTP=1 ... all
Cheers, Daniel
On 11/18/11 12:13 PM, Stefan Ljung wrote:
So, its not.
[test032@wslint90]# ./ser -V
version: ser 3.1.2 (i386/linux) 2fe4d6
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 2fe4d6
compiled on 11:31:57 Nov 18 2011 with gcc 4.1.2
This result came after an untar and then make command.
Here's my machine :
[linux]# uname -a
Linux wslint90 2.6.23.1-21.fc7 #1 SMP Thu Nov 1 21:09:24 EDT 2007 i686 i686 i386 GNU/Linux
What can I do to force it in ?
/Stefan
________________________________ From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: den 18 november 2011 11:59 To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Cc: Stefan Ljung Subject: Re: [SR-Users] Core compiled with Sctp support
Hello,
when sctp support is available, if you do 'kamailio -V' or 'ser -V' you should see USE_SCTP flag there.
Not sure if sctp is enabled by default in listen sockets, you can do it anyhow with global parameter:
enable_sctp=yes
Cheers, Daniel
On 11/18/11 11:49 AM, Stefan Ljung wrote: I've downloaded sip-router 3.1.2 and have been struggling with the make commands for configuring. Compiling and installing. Can't really say that I master it. But I have finally managed to do all steps and started a example ser.cfg.
One of the features I want to play around eith is the sctp transport.
From previous experiments with OpenSER I kearned that if I only specify a listen host address without transport protocol all three UDP TCP and SCTP sockets will be started.
Ths time I only see UDP and TCP: Listening on udp: 127.0.0.1:5060 tcp: 127.0.0.1:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060
I have read the c sources to verify that the sctp libs and header files are in the right places, and they are.
What I could need is a tip on how to verify that my core has been compiled with sctp support. How can I see that ? In what files would there be a confimation of that the sctp feature will be compiled in?
/Stefan
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
Just one more question.
Iget these warnings: CC (gcc) [ser] sctp_server.o sctp_server.c:504:2: warning: #warning no sctp lib support for SCTP_FRAGMENT_INTERLEAVE, consider upgrading sctp_server.c:550:2: warning: #warning no sctp lib support for SCTP_PARTIAL_DELIVERY_POINT, consider upgrading sctp_server.c:735:2: warning: #warning no sctp lib support for SCTP_MAX_BURST, consider upgrading sctp_server.c: In function 'sctp_init_sock_opt_common': sctp_server.c:412: warning: unused variable 'optlen' sctp_server.c:411: warning: unused variable 'saved_errno' sctp_server.c:410: warning: unused variable 'pd_point' Is that something I can live with ?
What do they do, is there any detailed description of them?
/Stefan
________________________________ From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: den 18 november 2011 12:53 To: Stefan Ljung; kamailio users Subject: Re: [SR-Users] Core compiled with Sctp support
Don't forget to keep the mailing list cc-ed -- private emails sent from mailing lists discussion are going to be discarded.
If you have libsctp devel package installed, try compilation with:
make SCTP=1 ... all
Cheers, Daniel
On 11/18/11 12:13 PM, Stefan Ljung wrote:
So, its not.
[test032@wslint90]# ./ser -V
version: ser 3.1.2 (i386/linux) 2fe4d6
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 2fe4d6
compiled on 11:31:57 Nov 18 2011 with gcc 4.1.2
This result came after an untar and then make command.
Here's my machine :
[linux]# uname -a
Linux wslint90 2.6.23.1-21.fc7 #1 SMP Thu Nov 1 21:09:24 EDT 2007 i686 i686 i386 GNU/Linux
What can I do to force it in ?
/Stefan
________________________________ From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: den 18 november 2011 11:59 To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Cc: Stefan Ljung Subject: Re: [SR-Users] Core compiled with Sctp support
Hello,
when sctp support is available, if you do 'kamailio -V' or 'ser -V' you should see USE_SCTP flag there.
Not sure if sctp is enabled by default in listen sockets, you can do it anyhow with global parameter:
enable_sctp=yes
Cheers, Daniel
On 11/18/11 11:49 AM, Stefan Ljung wrote: I've downloaded sip-router 3.1.2 and have been struggling with the make commands for configuring. Compiling and installing. Can't really say that I master it. But I have finally managed to do all steps and started a example ser.cfg.
One of the features I want to play around eith is the sctp transport.
From previous experiments with OpenSER I kearned that if I only specify a listen host address without transport protocol all three UDP TCP and SCTP sockets will be started.
Ths time I only see UDP and TCP: Listening on udp: 127.0.0.1:5060 tcp: 127.0.0.1:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060
I have read the c sources to verify that the sctp libs and header files are in the right places, and they are.
What I could need is a tip on how to verify that my core has been compiled with sctp support. How can I see that ? In what files would there be a confimation of that the sctp feature will be compiled in?
/Stefan
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 11/18/11 2:44 PM, Stefan Ljung wrote:
Just one more question. Iget these warnings: CC (gcc) [ser] sctp_server.o sctp_server.c:504:2: warning: #warning no sctp lib support for SCTP_FRAGMENT_INTERLEAVE, consider upgrading sctp_server.c:550:2: warning: #warning no sctp lib support for SCTP_PARTIAL_DELIVERY_POINT, consider upgrading sctp_server.c:735:2: warning: #warning no sctp lib support for SCTP_MAX_BURST, consider upgrading
these warnings are printed because you have a version of sctp lib that does not support some of the sctp extensions. But all should be fine anyhow.
sctp_server.c: In function 'sctp_init_sock_opt_common': sctp_server.c:412: warning: unused variable 'optlen' sctp_server.c:411: warning: unused variable 'saved_errno' sctp_server.c:410: warning: unused variable 'pd_point'
These are harmless as well.
Is that something I can live with ?
Yes.
What do they do, is there any detailed description of them?
Maybe you find some comments in the code -- they are for internal usage, not for config file.
Cheers, Daniel
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com] *Sent:* den 18 november 2011 12:53 *To:* Stefan Ljung; kamailio users *Subject:* Re: [SR-Users] Core compiled with Sctp support
Don't forget to keep the mailing list cc-ed -- private emails sent from mailing lists discussion are going to be discarded.
If you have libsctp devel package installed, try compilation with:
make SCTP=1 ... all
Cheers, Daniel
On 11/18/11 12:13 PM, Stefan Ljung wrote:
So, its not.
[test032@wslint90]# ./ser -V
version: ser 3.1.2 (i386/linux) 2fe4d6
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 2fe4d6
compiled on 11:31:57 Nov 18 2011 with gcc 4.1.2
This result came after an untar and then make command.
Here's my machine :
[linux]# uname -a
Linux wslint90 2.6.23.1-21.fc7 #1 SMP Thu Nov 1 21:09:24 EDT 2007 i686 i686 i386 GNU/Linux
What can I do to force it in ?
/Stefan
*From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com] *Sent:* den 18 november 2011 11:59 *To:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List *Cc:* Stefan Ljung *Subject:* Re: [SR-Users] Core compiled with Sctp support
Hello,
when sctp support is available, if you do 'kamailio -V' or 'ser -V' you should see USE_SCTP flag there.
Not sure if sctp is enabled by default in listen sockets, you can do it anyhow with global parameter:
enable_sctp=yes
Cheers, Daniel
On 11/18/11 11:49 AM, Stefan Ljung wrote:
I've downloaded sip-router 3.1.2 and have been struggling with the make commands for configuring. Compiling and installing. Can't really say that I master it. But I have finally managed to do all steps and started a example ser.cfg. One of the features I want to play around eith is the sctp transport. From previous experiments with OpenSER I kearned that if I only specify a listen host address without transport protocol all three UDP TCP and SCTP sockets will be started. Ths time I only see UDP and TCP: Listening on udp: 127.0.0.1:5060 tcp: 127.0.0.1:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060 I have read the c sources to verify that the sctp libs and header files are in the right places, and they are. What I could need is a tip on how to verify that my core has been compiled with sctp support. How can I see that ? In what files would there be a confimation of that the sctp feature will be compiled in? /Stefan
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Stefan Ljung