hello fellows, everytime i get this message while running ser,i am new to ser,so plz help me out n mail me if you can find a way out of this mail to : kumargs84(a)yahoo.co.in 0(15400) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(15400) parse error (76,60-61): Can't set module parameter ERROR: bad config file (1 errors) here's my ser.cfg file, # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #Uncomment these lines to enter debugging mode debug=3 log_stderror=yes listen=127.0.0.1 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #---usrloc param's--- modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #---acc param's --- modparam("acc", "log_level", 2) modparam("acc", "log_flag", 2) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # if (method=="REGISTER") { # setflag(1); # setflag(2); # log(1, "REGISTER received\n"); # } else { # log(1, "non-REGISTER received\n"); # }; # if (uri=~"sip:.*[@:]voip.brujula.net") { # log(1, "request for voip.brujula.net received\n"); # } else { # log(1, "request for other domain received\n"); # }; # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # Process record-routing if (loose_route()) { t_relay(); break; }; # labeled all transaction for accounting setflag(1); # record-route INVITES to make sure BYEs will visit our server too if (method=="INVITE") record_route(); # forward the request statefuly now; (we need *stateful* forwarding, # because the stateful mode correlates requests with replies and # drops retranmissions; otherwise, we would have to report on # every single message received) if (!t_relay()) { sl_reply_error(); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication setflag(1); setflag(2); log(1,"REGISTER : Authenticating user\n"); if (!www_authorize("voip.brujula.net","subscriber")) { log(1,"REGISTER : Challenging user\n"); www_challenge("voip.brujula.net", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }