20 Mar
2009
20 Mar
'09
1:04 p.m.
Hi, perhaps I miss something but I don't get set_dlg_profile() working:
----------------
modparam("dialog", "dlg_flag", FLAG_DIALOG)
modparam("dialog", "dlg_match_mode", 1)
modparam("dialog", "db_mode", 1)
modparam("dialog", "profiles_no_value", "inbound ;
outbound")
if is_method("INVITE") {
setflag(FLAG_DIALOG);
set_dlg_profile("outbound");
...
----------------
But when I run "kamctl fifo profile_list_dlgs outbound" I see nothing (the
dialog does appear listed in "kamctl fifo dlg_list").
I've also added into the loose_route section:
if (is_in_profile("outbound")) {
xlog("L_CRIT", "*** this request belongs to an outbound call\n");
}
This should appear when the ACK-200 arrives, also in any re-INVITE or BYE, but
it doesn't ¿?
Do I miss something? Thanks.
--
Iñaki Baz Castillo
24 Mar
24 Mar
10:55 a.m.
Hello,
do you get any particular error in the syslog?
Can you try using dlg_mange() instead of setting the FLAG_DIALOG?
http://kamailio.org/docs/modules/1.5.x/dialog.html#id2531667
Cheers,
Daniel
On 03/20/2009 01:04 PM, Iñaki Baz Castillo wrote:
Hi, perhaps I miss something but I don't get
set_dlg_profile() working:
----------------
modparam("dialog", "dlg_flag", FLAG_DIALOG)
modparam("dialog", "dlg_match_mode", 1)
modparam("dialog", "db_mode", 1)
modparam("dialog", "profiles_no_value", "inbound ;
outbound")
if is_method("INVITE") {
setflag(FLAG_DIALOG);
set_dlg_profile("outbound");
...
----------------
But when I run "kamctl fifo profile_list_dlgs outbound" I see nothing (the
dialog does appear listed in "kamctl fifo dlg_list").
I've also added into the loose_route section:
if (is_in_profile("outbound")) {
xlog("L_CRIT", "*** this request belongs to an outbound
call\n");
}
This should appear when the ACK-200 arrives, also in any re-INVITE or BYE, but
it doesn't ¿?
Do I miss something? Thanks.
--
Daniel-Constantin Mierla
SIP Router Masterclass - Kamailio (OpenSER) Training
http://www.asipto.com/index.php/sip-router-masterclass/
11:15 a.m.
2009/3/24 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Hello,
do you get any particular error in the syslog?
Can you try using dlg_mange() instead of setting the FLAG_DIALOG?
http://kamailio.org/docs/modules/1.5.x/dialog.html#id2531667
Thanks, that works but just if I set "dlg_manage()" before
"set_dlg_profile():
dlg_manage();
set_dlg_profile("topbx");
But the following doesn't work:
setflag(FLAG_DIALOG);
set_dlg_profile("topbx");
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:17 a.m.
2009/3/24 Iñaki Baz Castillo <ibc(a)aliax.net>et>:
> Can you try using dlg_mange() instead of setting
the FLAG_DIALOG?
> http://kamailio.org/docs/modules/1.5.x/dialog.html#id2531667
Also, could I know the difference between setflag(FLAG_DIALOG) and
dlg_manage() ?
According to the doc:
-----------
dlg_manage()
Process current SIP request with dialog module. It is alternative to
setting dialog flag for initial INVITE and Route-parameter-callback
execution for within-dialog requests.
-----------
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:23 a.m.
On 03/24/2009 11:17 AM, Iñaki Baz Castillo wrote:
2009/3/24 Iñaki Baz Castillo <ibc(a)aliax.net>et>:
For initial INVITE when setting the flag, the dialog is actually created
upon a tm callback. With dlg_manage() dialog is created immediately.
For requests withing dialog, the state is updated either when
loose_route() is executed or when dlg_manage() is called.
The need of dlg_manage() is especially when you have static routes
inside your network and you do not add Record-Route in all your servers.
Also, makes more clear when you get dialog related operations done.
Cheers,
Daniel
> Can you try using dlg_mange() instead of
setting the FLAG_DIALOG?
> http://kamailio.org/docs/modules/1.5.x/dialog.html#id2531667
>
Also, could I know the difference between setflag(FLAG_DIALOG) and
dlg_manage() ?
According to the doc:
-----------
dlg_manage()
Process current SIP request with dialog module. It is alternative to
setting dialog flag for initial INVITE and Route-parameter-callback
execution for within-dialog requests.
-----------
--
Daniel-Constantin Mierla
SIP Router Masterclass - Kamailio (OpenSER) Training
http://www.asipto.com/index.php/sip-router-masterclass/
11:30 a.m.
2009/3/24 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
For initial INVITE when setting the flag, the dialog
is actually created
upon a tm callback. With dlg_manage() dialog is created immediately.
ok
For requests withing dialog, the state is updated
either when loose_route()
is executed or when dlg_manage() is called.
So, in case I do "loose_route()" I don't need to call
"dlg_manage()"
during in-dialog processing, right?
The need of dlg_manage() is especially when you have
static routes inside
your network and you do not add Record-Route in all your servers. Also,
makes more clear when you get dialog related operations done.
Useful, yes :)
Thanks.
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:59 a.m.
I'm very annoying because now I've removed *all* dlg_manage() and
setflag(DIALOG) from my script (dialog module remains loaded) and the
dialogs are stored in memory and DB !!!
Do I miss something? Also, using "dlg_manage()" I get 2 entries for each
dialog!
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
12:06 p.m.
On 03/24/2009 11:59 AM, Iñaki Baz Castillo wrote:
I'm very annoying because now I've removed
*all* dlg_manage() and
setflag(DIALOG) from my script (dialog module remains loaded) and the
dialogs are stored in memory and DB !!!
Old dialogs only or new dialogs are added there?
Do I miss something? Also, using
"dlg_manage()" I get 2 entries for each dialog!
Are you sure? There are constraints to prevent that. Are they both in
memory and db?
Cheers,
Daniel
--
Daniel-Constantin Mierla
SIP Router Masterclass - Kamailio (OpenSER) Training
http://www.asipto.com/index.php/sip-router-masterclass/
12:34 p.m.
2009/3/24 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Yes they were (when dialog functions were used in the config script).
I must test it more.
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
On 03/24/2009 11:59 AM, Iñaki Baz Castillo wrote:
I stop Kamailio, clean dialog table, start kamailio. No dialogs if I
do "kamct fifo dlg_list", neither in DB.
I do a call (ringing). It appears running the fifo commands and also
in the dialog table.
I've dialog module loaded, but I don't use dlg_manage() or
setflag(DIALOG), neither set_dlg_profile(), nothing related to dialog
module!
I'm very annoying because now I've removed *all* dlg_manage() and
setflag(DIALOG) from my script (dialog module remains loaded) and the
dialogs are stored in memory and DB !!!
Old dialogs only or new dialogs are added there? Do I miss
something? Also, using "dlg_manage()" I get 2 entries for each
dialog!
Are you sure? There are constraints to prevent that. Are they both in memory
and db?
11:19 a.m.
On 03/24/2009 11:15 AM, Iñaki Baz Castillo wrote:
2009/3/24 Daniel-Constantin Mierla
<miconda(a)gmail.com>om>:
ok. I will analyze to see what happens.
You didn't get any error when you try first option, right?
Cheers,
Daniel
--
Daniel-Constantin Mierla
SIP Router Masterclass - Kamailio (OpenSER) Training
http://www.asipto.com/index.php/sip-router-masterclass/
Hello,
do you get any particular error in the syslog?
Can you try using dlg_mange() instead of setting the FLAG_DIALOG?
http://kamailio.org/docs/modules/1.5.x/dialog.html#id2531667
Thanks, that works but just if I set "dlg_manage()" before
"set_dlg_profile():
dlg_manage();
set_dlg_profile("topbx");
But the following doesn't work:
setflag(FLAG_DIALOG);
set_dlg_profile("topbx");
5725
days inactive
5729
days old
10 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Iñaki Baz Castillo