New subject: [Serusers] caller-id with raius using sip-rpid

6 Oct 2003

OK, I understand now.  The caller-id works correctly when I call out to
the PSTN through a Cisco AS5350 gateway.  The caller-id does not work
when I call another ATA.  I have to assume that the ATA does not support
the remote-party-id field.  Anyone else have experience with this, since
I don't see any documentation related to remote-party-id on an ATA?
I'll also post this to the cisco message boards and re-post any response
that I get.

Stephen

Subject: RE: [Serusers] caller-id with raius using sip-rpid

Well, as you see, rpid is attached to a non-numeric subscriber's
request, so that it can be processed by devices capable of doing
so. What is the problem then?

-jiri

At 11:21 PM 10/3/2003, Steve Dolloff wrote:
...
 I want caller-id to work for a subscriber who has a
non-numeric
username.

Subject: Re: [Serusers] caller-id with raius using sip-rpid

There is a Remote-Party-ID header in your message. What else do you
want ? Please be more specific and provide some examples, your
terminology is 
hard to follow for me, sorry.

 Jan.

On 03-10 16:05, Steve Dolloff wrote:
  Calling from one ata to another, proxied and
registered through ser,
 here is my ngrep port 5060 output.  Remote-party-id is being set but not
> the call-id.  
> 
> U 219.242.10.153:5060 -> 226.145.234.80:5060
>   INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp
> SIP/2.0..Max-Fo
>   rwards: 10..Record-Route:
> <sip:256@219.242.10.153;ftag=2441840520;lr=on>..V
>   ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via:
> SIP/2.0/
>   UDP 226.145.234.113:5060;rport=5060..From:
> sip:test@voip2.test.net;tag=24418
>   40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID:
> 2303820380(a)226.145.
>   234.113..CSeq: 2 INVITE..Contact:
> <sip:test@226.145.234.113:5060;transport=
>   udp>..User-Agent: Cisco ATA 186  v2.16.2 ata18x
> (030909a)..Authorization: D
>   igest
>
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
...

812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c6533
3
...
 > 439b
>   6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type:
> applicatio
>   n/sdp..Remote-Party-ID:
> 222;party=calling;id-type=subscriber;screen=no....v
>   =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN IP4
...
 > 226.14
>   5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0
> PCMU/8000/1..
>   a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101
> telephone-even
>   t/8000..a=fmtp:101 0-15..a=direction:active..
> #
> U 226.145.234.80:5060 -> 219.242.10.153:5060
>   SIP/2.0 100 Trying..Via: SIP/2.0/UDP
> 219.242.10.153;branch=z9hG4bK41f3.9e2c
>   3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From:
> sip:test@vo
>   ip2.test.net;tag=2441840520..To:
> <sip:256@voip2.test.net;user=phone>;tag=2077
>   559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2 INVITE..Server:
...
   Cisco
   ATA 186  v2.16.2 ata18x (030909a)..Content-Length: 0....

 Subject: Re: [Serusers] caller-id with raius using sip-rpid

 Is there any Remote-Party-ID header field in outgoing INVITE ? If so
 then your gateway/whatever ignores it.

  Jan.

 On 02-10 15:18, Steve Dolloff wrote:
 > Any phone that supports caller-id.  But I haven't gotten to work. I'm
   seeing
the username instead.  

 Subject: RE: [Serusers] caller-id with raius using sip-rpid

 Which phone device should I use to see caller ID
 information when using the ATA186?

 Alejandro

  --- Steve Dolloff &lt;sdolloff(a)noc.test.net&gt; escreveu: >
 At the top of the config I have the following
  statement....

         if (method=="INVITE") {
                 record_route();
                 if (!radius_www_authorize("")) {
                         log(1,"radius auth
 failure");

 www_challenge("voip2.test.net","0");
                         break;
                 };
                 append_rpid_hf();
      };

 If I call a phone with caller-id and my username is
 256, it shows 256 on
 the phone, if I call with a username of test, it
 shows 4534 on the
 handset even though I have the sip-rpid set to 222.

 Stephen

 Subject: Re: [Serusers] caller-id with raius using
 sip-rpid

 Retrieving caller-id when users register doesn't
 work because REGISTER
 messages are processed by the server and the server
 generates a reply
 only.

 What you need is to insert Remote-Party-ID header
 field into INVITE
 message, to make it work you must authenticate also
 INVITE messages.
 My guess is that you do not authenticate INVITE
 messages and therefore
 there is nothing append_rpid_hf can add.

   Jan.

 On 02-10 11:35, Steve Dolloff wrote:
 > I want to retrieve the caller-id of a user from
 radius when they
 > register and use it when I redirect an invite
 request to the voicemail
 > system so that the voicemail system can route the
 call based on
 > caller-id.  I also want to be able to send it to
 the sip gateway when
 I
 > am routing calls to the pstn.
 > 
 > I have this in my config currently and it doesn't
 appear to set the
 > caller-id in the invite message.
 > 
 >
 rewritehostport("219.242.10.153:5061");
 >                                 append_rpid_hf();
 >                                 t_relay();
 > 
 > 
 > Subject: Re: [Serusers] caller-id with raius using
 sip-rpid
 > 
 > append_rpid_hf has no parameters. Version with 2
 parameters is in
 > unstable branch in the CVS only. What exactly do
 you want to do ?
 > 
 >   Jan.
 > 
 > On 02-10 11:26, Steve Dolloff wrote:
 > > I found this example in a previous Serusers
 message.  
 > > 
 > > append_rpid_hf("<sip:+",
 > >  
 > >
 >

"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes")
;
...
     > > 
 > > I tried calling append_rpid_hf();, but it does
 nothing.
 > > 
 > > I also tried
 > >
 >

append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes
"
...
   > > >
> );  but I get an unknown command presumably
 > > because I am not using
 > > the
 > > > > right number of parameters.
 > > > > 
 > > > > I only want to modify the calling-id info.
 > > > > 
 > > > > Can anyone provide an example?
 > > > > 
 > > > > -----Original Message-----
 > > > > From: Jan Janak [mailto:jan@iptel.org] 
 > > > > Sent: Thursday, October 02, 2003 11:09 AM
 > > > > To: Steve Dolloff
 > > > > Cc: serusers(a)lists.iptel.org
 > > > > Subject: Re: [Serusers] caller-id with raius
 > > using sip-rpid
 > > > > 
 > > > > If you want to add Remote-Party-ID header field
 > > then you have to
 > > call
 > > > > append_rpid_hf function in your script.
 > > > > 
 > > > >   Jan.
 > > > > 
 > > > > On 02-10 11:07, Steve Dolloff wrote:
 > > > > > OK, I am setting up a Voicemail system (using
 > > asterisk) and I am
 > > > > > currently doing a rewritehostport(ip:port) and
 > > then trelay() to
 > > send
 > > > > it
 > > > > > to the voicemail system if an invite fails.
 > > > > > 
 > > > > > Should I change something? See my ser.cfg and
 > > output from the call
 > > > to
 > > > > > the vm.
 > > > > > 
 > > > > > Here is the code from ser.cfg
 > > > > > 
 > > > > >
 > > > > rewritehostport("219.242.10.153:5061");
 > > > > >                                 t_relay();
 > > > > > 
 > > > > > Here is the sip info from asterisk.
 > > > > > 
 > > > > >  INVITE sip:200@219.242.10.153:5061;user=phone
 > > SIP/2.0
 > > > > > Max-Forwards: 10
 > > > > > Record-Route:
 > > <sip:200@219.242.10.153;ftag=2236658534;lr=on>
 > > > > > Via: SIP/2.0/UDP
 > > 219.242.10.153;branch=z9hG4bK13de.31901234.0
 > > > > > Via: SIP/2.0/UDP
 > > 226.145.234.113:5060;rport=5060
 > > > > > From: sip:test@voip2.test.net;tag=2236658534
 > > > > > To: <sip:200@voip2.test.net;user=phone>
 > > > > > Call-ID: 2218108971(a)226.145.234.113
 > > > > > CSeq: 1 INVITE
 > > > > > Contact:
 > > <sip:test@226.145.234.113:5060;transport=udp>
 > > > > > User-Agent: Cisco ATA 186  v2.16.2 ata18x
 > > (030909a)
 > > > > > Expires: 300
 > > > > > Content-Length: 271
 > > > > > Content-Type: application/sdp
 > > > > > 
 > > > > > 
 > > > > > 
 > > > > > Subject: Re: [Serusers] caller-id with raius
 > > using sip-rpid
 > > > > > 
 > > > > > Remote-Party-ID header field is inserted into
 > > forwarded requests,
 > > > not
 > > > > > responses.
 > > > > > 
 > > > > >  Jan.
 > > > > > 
 > > > > > On 02-10 10:53, Steve Dolloff wrote:
 > > > > > > Ser doesn't appear to be passing the
 > > Caller-id to the ata at
 > > auth
 > > > or
 > > > > I
 > > > > > > am doing something wrong.  Can anyone point
 > > me in the right
 > > > > direction?
 > > > > > > 
 > > > > > > Thanks,
 > > > > > > 
 > > > > > > Stephen
 > > > > > > 
 > > > > > > I have the following entry in my freeradius
 > > users file.
 > > > > > > 
 > > > > > > test(a)voip2.test.net Auth-Type := Digest,
 > > User-Password == "test"
 > > > > > >         Reply-Message = "Hello, test with
 > > digest", Sip-Rpid =
 > > > > > > "8472222222"
 > > > > > > 
 > > > > > > When I run a radclient test I get the
 > > correct info..
 > > > > > > 
 > > > > > > radclient -f digest.test 219.242.10.153:1812
 > > auth testing
 > > > > > > Received response ID 134, code 2, length =
 > > 57
 > > 
 > === message truncated === 
 > 
 > Yahoo! Mail - o melhor webmail do Brasil
 > http://mail.yahoo.com.br 
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers 
--
Jiri Kuthan            http://iptel.org/~jiri/ 