16 Feb
2014
16 Feb
'14
2:44 p.m.
Hi,
following the documentation, the following lines need to be updated on the init.d script.
DAEMON=/usr/local/sbin/kamailio
CFGFILE=/usr/local/etc/kamailio/kamailio.cfg
Anyway, there is no CFGFILE already setted.
Is it correct to add CFGFILE along with DAEMON?
On top of this, in the check_fork () procedure, there’s a reference to a cfg_file that is
nonexistent.
In my installation i changed it to the real path of the kamailio.cfg file generated during
installation.
check_fork ()
{
if grep -q "^[[:space:]]*fork[[:space:]]*=[[:space:]]*no.*"
/usr/local/etc/kamailio/kamailio.cfg; then
log_failure_msg "Not starting $DESC: fork=no specified in config file; run
/etc/init.d/kamailio debug instead"
exit 0
fi
}
Is it correct to change path in the check_fork procedure with the correct one?
Regards,
17 Feb
17 Feb
12:10 a.m.
Hello,
probably CFGFILE variable was removed on the latest updates done to the
init.d script. You can add it and replace the occurrences of the
kamailio.cfg path.
On the other hand, you can just do:
make install-initd-debian
and the paths should be updated and the init.d scripts deployed.
Cheers,
Daniel
On 16/02/14 13:44, Francesco Maria Magnini wrote:
Hi,
following the documentation, the following lines need to be updated on the init.d
script.
DAEMON=/usr/local/sbin/kamailio
CFGFILE=/usr/local/etc/kamailio/kamailio.cfg
Anyway, there is no CFGFILE already setted.
Is it correct to add CFGFILE along with DAEMON?
On top of this, in the check_fork () procedure, there’s a reference to a cfg_file that is
nonexistent.
In my installation i changed it to the real path of the kamailio.cfg file generated
during installation.
check_fork ()
{
if grep -q "^[[:space:]]*fork[[:space:]]*=[[:space:]]*no.*"
/usr/local/etc/kamailio/kamailio.cfg; then
log_failure_msg "Not starting $DESC: fork=no specified in config file; run
/etc/init.d/kamailio debug instead"
exit 0
fi
}
Is it correct to change path in the check_fork procedure with the correct one?
Regards,
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
19 Feb
19 Feb
10:59 p.m.
Hi,
i tried make install-initd-debian.
For your information, after starting kamailio the output is still saying
"grep: /etc/kamailio/kamailio.cgf file not found"
even if the service is starting fine.
Can I left the init.d script unchanged or do I need to update manually the
cfg path?
Is there a way to check if kamailio is pointing to the .cfg file properly?
Regards
On Sun, Feb 16, 2014 at 11:10 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
probably CFGFILE variable was removed on the latest updates done to the
init.d script. You can add it and replace the occurrences of the
kamailio.cfg path.
On the other hand, you can just do:
make install-initd-debian
and the paths should be updated and the init.d scripts deployed.
Cheers,
Daniel
On 16/02/14 13:44, Francesco Maria Magnini wrote:
--
“I videogiochi non influenzano i bambini.
Voglio dire, se pac-man avesse influenzato la nostra generazione,
staremmo tutti saltando in sale scure,
masticando pillole magiche e ascoltando musica elettronica
ripetitiva...”
(Kristian Wilson, Nintendo Inc, 1989)
Hi,
following the documentation, the following lines need to be updated on
the init.d script.
DAEMON=/usr/local/sbin/kamailio
CFGFILE=/usr/local/etc/kamailio/kamailio.cfg
Anyway, there is no CFGFILE already setted.
Is it correct to add CFGFILE along with DAEMON?
On top of this, in the check_fork () procedure, there’s a reference to a
cfg_file that is nonexistent.
In my installation i changed it to the real path of the kamailio.cfg file
generated during installation.
check_fork ()
{
if grep -q "^[[:space:]]*fork[[:space:]]*=[[:space:]]*no.*"
/usr/local/etc/kamailio/kamailio.cfg; then
log_failure_msg "Not starting $DESC: fork=no specified in config
file; run /etc/init.d/kamailio debug instead"
exit 0
fi
}
Is it correct to change path in the check_fork procedure with the correct
one?
Regards,
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
3933
days inactive
3936
days old
2 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Francesco Maria Magnini