5 Oct
2007
5 Oct
'07
2:50 p.m.
Hi,
I need some help.
Here's my input in onreply_route:
--- 8< ---
U 2007/10/05 12:26:58.832161 xxx.18.234.14:5060 -> xxx.18.238.2:5060
SIP/2.0 180 Ringing.
From: "aki"<sip:358942419xxx@devel.foo.fi>;tag=as508b1a29.
To: <sip:3584577509xxx@vox.bar.fi>;tag=eea1259-13c4-47060394-b296ee66-575d.
Call-ID: 7b18b07b06335629699f1d5818e07548(a)devel.foo.fi.
CSeq: 102 INVITE.
Via: SIP/2.0/UDP xxx.18.238.2;branch=z9hG4bK570f.7ca86953.0.
Via: SIP/2.0/UDP xxx.18.238.15:5060;branch=z9hG4bK68f201e6.
Contact: <sip:3584577509xxx@xxx.18.234.14>.
Record-Route: <sip:xxx.18.238.2;lr;ftag=as508b1a29>.
Content-Type: multipart/mixed
;boundary="Boundary47060397_b296f9ef_3ecc_bc780ec".
Content-Length: 397.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/SDP.
.
v=0.
o=xxx.18.234.23 1191575887 1191575887 IN IP4 xxx.18.234.23.
s=Session SDP.
c=IN IP4 xxx.18.234.23.
t=0 0.
m=audio 11130 RTP/AVP 0.
a=rtpmap:0 PCMU/8000.
a=ptime:20.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/ISUP ;version=itu-t.
.
,.....4)..9.7.7....
--Boundary47060397_b296f9ef_3ecc_bc780ec--
--- >8 ---
These extra Conten-Type (application/ISUP and multipart/mixed) are
messing up some older PBX's of ours, so I need to strip them out.
With perl I could do it like this:
s/^Content-Type: application\/ISUP
;version=itu-t.*--Boundary/--Boundary/sm;
s/--Boundary.*$//mg;
However the subst_body() doesnt seem to support /sm flags.
Discussing this on #openser @ freenode we tried solutions with
transformations (thanks NormB!) like:
$(hdr(Content-Type)) = $(hdr(Content-Type){s.substr,0,0})
.. or like the same with replace* functions.
However I didnt find a suitable solutions.
Anyone maybe got any ideas?
Br,
Aki
9 Oct
9 Oct
11:03 a.m.
Hi Aki,
Even if not documented, the s flag is supported in the subst_*
functions...Is the m flag mandatory in your case?
regards,
bogdan
Aki Rehn wrote:
Hi,
I need some help.
Here's my input in onreply_route:
--- 8< ---
U 2007/10/05 12:26:58.832161 xxx.18.234.14:5060 -> xxx.18.238.2:5060
SIP/2.0 180 Ringing.
From: "aki"<sip:358942419xxx@devel.foo.fi>;tag=as508b1a29.
To:
<sip:3584577509xxx@vox.bar.fi>;tag=eea1259-13c4-47060394-b296ee66-575d.
Call-ID: 7b18b07b06335629699f1d5818e07548(a)devel.foo.fi.
CSeq: 102 INVITE.
Via: SIP/2.0/UDP xxx.18.238.2;branch=z9hG4bK570f.7ca86953.0.
Via: SIP/2.0/UDP xxx.18.238.15:5060;branch=z9hG4bK68f201e6.
Contact: <sip:3584577509xxx@xxx.18.234.14>.
Record-Route: <sip:xxx.18.238.2;lr;ftag=as508b1a29>.
Content-Type: multipart/mixed
;boundary="Boundary47060397_b296f9ef_3ecc_bc780ec".
Content-Length: 397.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/SDP.
.
v=0.
o=xxx.18.234.23 1191575887 1191575887 IN IP4 xxx.18.234.23.
s=Session SDP.
c=IN IP4 xxx.18.234.23.
t=0 0.
m=audio 11130 RTP/AVP 0.
a=rtpmap:0 PCMU/8000.
a=ptime:20.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/ISUP ;version=itu-t.
.
,.....4)..9.7.7....
--Boundary47060397_b296f9ef_3ecc_bc780ec--
--- >8 ---
These extra Conten-Type (application/ISUP and multipart/mixed) are
messing up some older PBX's of ours, so I need to strip them out.
With perl I could do it like this:
s/^Content-Type: application\/ISUP
;version=itu-t.*--Boundary/--Boundary/sm;
s/--Boundary.*$//mg;
However the subst_body() doesnt seem to support /sm flags.
Discussing this on #openser @ freenode we tried solutions with
transformations (thanks NormB!) like:
$(hdr(Content-Type)) = $(hdr(Content-Type){s.substr,0,0})
.. or like the same with replace* functions.
However I didnt find a suitable solutions.
Anyone maybe got any ideas?
Br,
Aki
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
12:51 p.m.
Hi Bogdan,
Bogdan-Andrei Iancu kirjoitti:
Hi Aki,
Even if not documented, the s flag is supported in the subst_*
functions...Is the m flag mandatory in your case?
Yes, in this case it was mandatory. But not anymore.
Big thanks to Juha Heinänen, who created a filter_body() function to
textops module to svn head, which then solved my problem.
regards,
bogdan
Br,
Aki
Aki Rehn wrote:
Hi,
I need some help.
Here's my input in onreply_route:
--- 8< ---
U 2007/10/05 12:26:58.832161 xxx.18.234.14:5060 -> xxx.18.238.2:5060
SIP/2.0 180 Ringing.
From: "aki"<sip:358942419xxx@devel.foo.fi>;tag=as508b1a29.
To:
<sip:3584577509xxx@vox.bar.fi>;tag=eea1259-13c4-47060394-b296ee66-575d.
Call-ID: 7b18b07b06335629699f1d5818e07548(a)devel.foo.fi.
CSeq: 102 INVITE.
Via: SIP/2.0/UDP xxx.18.238.2;branch=z9hG4bK570f.7ca86953.0.
Via: SIP/2.0/UDP xxx.18.238.15:5060;branch=z9hG4bK68f201e6.
Contact: <sip:3584577509xxx@xxx.18.234.14>.
Record-Route: <sip:xxx.18.238.2;lr;ftag=as508b1a29>.
Content-Type: multipart/mixed
;boundary="Boundary47060397_b296f9ef_3ecc_bc780ec".
Content-Length: 397.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/SDP.
.
v=0.
o=xxx.18.234.23 1191575887 1191575887 IN IP4 xxx.18.234.23.
s=Session SDP.
c=IN IP4 xxx.18.234.23.
t=0 0.
m=audio 11130 RTP/AVP 0.
a=rtpmap:0 PCMU/8000.
a=ptime:20.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/ISUP ;version=itu-t.
.
,.....4)..9.7.7....
--Boundary47060397_b296f9ef_3ecc_bc780ec--
--- >8 ---
These extra Conten-Type (application/ISUP and multipart/mixed) are
messing up some older PBX's of ours, so I need to strip them out.
With perl I could do it like this:
s/^Content-Type: application\/ISUP
;version=itu-t.*--Boundary/--Boundary/sm;
s/--Boundary.*$//mg;
However the subst_body() doesnt seem to support /sm flags.
Discussing this on #openser @ freenode we tried solutions with
transformations (thanks NormB!) like:
$(hdr(Content-Type)) = $(hdr(Content-Type){s.substr,0,0})
.. or like the same with replace* functions.
However I didnt find a suitable solutions.
Anyone maybe got any ideas?
Br,
Aki
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
2:36 p.m.
Hi Aki,
OK - perfect :)....
regards,
bogdan
Aki Rehn wrote:
Hi Bogdan,
Bogdan-Andrei Iancu kirjoitti:
Hi Aki,
Even if not documented, the s flag is supported in the subst_*
functions...Is the m flag mandatory in your case?
Yes, in this case it was mandatory. But not anymore.
Big thanks to Juha Heinänen, who created a filter_body() function to
textops module to svn head, which then solved my problem.
regards,
bogdan
Br,
Aki
Aki Rehn wrote:
Hi,
I need some help.
Here's my input in onreply_route:
--- 8< ---
U 2007/10/05 12:26:58.832161 xxx.18.234.14:5060 -> xxx.18.238.2:5060
SIP/2.0 180 Ringing.
From: "aki"<sip:358942419xxx@devel.foo.fi>;tag=as508b1a29.
To:
<sip:3584577509xxx@vox.bar.fi>;tag=eea1259-13c4-47060394-b296ee66-575d.
Call-ID: 7b18b07b06335629699f1d5818e07548(a)devel.foo.fi.
CSeq: 102 INVITE.
Via: SIP/2.0/UDP xxx.18.238.2;branch=z9hG4bK570f.7ca86953.0.
Via: SIP/2.0/UDP xxx.18.238.15:5060;branch=z9hG4bK68f201e6.
Contact: <sip:3584577509xxx@xxx.18.234.14>.
Record-Route: <sip:xxx.18.238.2;lr;ftag=as508b1a29>.
Content-Type: multipart/mixed
;boundary="Boundary47060397_b296f9ef_3ecc_bc780ec".
Content-Length: 397.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/SDP.
.
v=0.
o=xxx.18.234.23 1191575887 1191575887 IN IP4 xxx.18.234.23.
s=Session SDP.
c=IN IP4 xxx.18.234.23.
t=0 0.
m=audio 11130 RTP/AVP 0.
a=rtpmap:0 PCMU/8000.
a=ptime:20.
.
--Boundary47060397_b296f9ef_3ecc_bc780ec.
Content-Type: application/ISUP ;version=itu-t.
.
,.....4)..9.7.7....
--Boundary47060397_b296f9ef_3ecc_bc780ec--
--- >8 ---
These extra Conten-Type (application/ISUP and multipart/mixed) are
messing up some older PBX's of ours, so I need to strip them out.
With perl I could do it like this:
s/^Content-Type: application\/ISUP
;version=itu-t.*--Boundary/--Boundary/sm;
s/--Boundary.*$//mg;
However the subst_body() doesnt seem to support /sm flags.
Discussing this on #openser @ freenode we tried solutions with
transformations (thanks NormB!) like:
$(hdr(Content-Type)) = $(hdr(Content-Type){s.substr,0,0})
.. or like the same with replace* functions.
However I didnt find a suitable solutions.
Anyone maybe got any ideas?
Br,
Aki
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6254
days inactive
6258
days old
3 comments
2 participants
participants (2)
-
Aki Rehn -
Bogdan-Andrei Iancu